Export limit exceeded: 397982 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (397982 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97546 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't spin forever on zero-length dirents when salvaging them LOLLM noticed that xrep_dir_recover_data can spin forever if it encounters an unused dirent that claims to have length zero. Fix that, and prevent the same thing from happening with a zero-length entry. | ||||
| CVE-2026-97545 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't leak new_bp if xfs_btree_bload_drop_buf fails LOLLM observes that in xfs_btree_bload_prep_block, xfs_btree_bload_drop_buf can hit an IO error if writing the delwri buffer list to disk fails. In this case, we fail to release new_bp, which means we lose a locked buffer. Fix that. | ||||
| CVE-2026-97544 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't leak dqacct if rhashtable insertion fails LOLLM observes that xqcheck_mod_live_ino_dqtrx doesn't free the newly allocated dqa object if rhashtable insertion fails. Fix this leak. | ||||
| CVE-2026-97543 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: destroy seen inode bitmap when we fail to add a dirpath LOLLM observes a memory leak in xchk_dirtree_create_path if we create the directory path object but appending the name to the path fails. When this happens, we don't tear down the (empty) seen inode bitmap. This is a pretty trivial error, but let's not leave logic bombs. Do the same for a similar bug in xrep_dirtree_create_adoption_path. | ||||
| CVE-2026-97542 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xfs: bail out on bitmap errors in xrep_agfl_fill LOLLM also points out that the xagb_bitmap_set call in xrep_agfl_fill can fail, but we don't check the result of xagb_bitmap_walk, so we silently drop the error and proceed with inconsistent incore data. That shouldn't be allowed. | ||||
| CVE-2026-97541 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k_htc: don't store usb_device_id usb_device_id is not guaranteed to live longer than probe due to presence of dynamic ID. All information apart from driver_data can be easily retrieved from usb_device, so just store driver_data. | ||||
| CVE-2026-97540 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: don't rely on id table pointer arithmetic The current code is broken when dynamic ID is involved; in such cases usb_device_id parameter of probe lives on the heap and the pointer arithmetic will get an index that is wildly out of bound. Instead of keeping a side table for additional information, use driver_info field of the usb_device_id. The dynamic ID parsing code needs to be updated for this; convert it to just write to the reserved entry for dynamic ID and remove the weird loop. | ||||
| CVE-2026-97539 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: xusbatm: don't rely on id table pointer arithmetic The current code is broken when dynamic ID is involved; in such cases usb_device_id parameter of probe lives on the heap and the pointer arithmetic will get an index that is wildly out of bound. xusbatm initialize the USB device IDs dynamically so it can just use driver_info too. Even with conversion, xusbatm still cannot support dynamic IDs, so also set no_dynamic_id. | ||||
| CVE-2026-97538 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (asus_rog_ryujin) Validate HID report lengths rog_ryujin_raw_event() parses response headers and payload fields without first checking that they are present in the received report. A short report can therefore make the driver consume uninitialized bytes from the HID transport buffer and expose them as sensor values through sysfs. Validate the response header and the fields used by each response type before parsing them. | ||||
| CVE-2026-97537 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix queue teardown NULL dma_free and bitmap locking qla25xx_free_req_que() and qla25xx_free_rsp_que() have two pre-existing bugs exposed on the error path of qla25xx_create_{req,rsp}_que(): 1. When dma_alloc_coherent() fails during queue creation, the error path calls the free function with req->ring / rsp->ring still NULL (from kzalloc). The unconditional dma_free_coherent() with a NULL cpu_addr is undefined behavior and can panic. 2. The free functions clear req_qid_map / rsp_qid_map under vport_lock, but the create functions protect the same bitmaps with mq_lock. This provides no mutual exclusion. Additionally, the create error path clears the bit and releases mq_lock before calling the free function, creating a window where another thread can allocate the same que_id and have its ha->req_q_map entry clobbered by the subsequent lockless NULL assignment in the free function. Fix by: - Guarding dma_free_coherent() with a NULL check on the ring pointer. - Using mq_lock (the lock held by all creators) in the free functions to atomically NULL the map entry and clear the bitmap bit. - Removing the now-redundant clear_bit blocks from the create error paths since the free functions handle it atomically. | ||||
| CVE-2026-97536 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix use-after-free of qpair work on queue teardown The response queue MSI-X handler qla2xxx_msix_rsp_q() schedules qla_do_work() via queue_work(ha->wq, &qpair->q_work). qla_do_work() dereferences the qpair (vha, rsp) and takes qpair->qp_lock. During teardown, qla2xxx_delete_qpair() deletes the response queue, which calls free_irq() in qla25xx_free_rsp_que(), and then frees the queue and the qpair. free_irq() waits for running hardirq handlers but does not cancel work already placed on ha->wq. A still-pending q_work then runs qla_do_work() against the freed qpair and response queue, causing a use-after-free. This is especially likely during full adapter teardown, where destroy_workqueue(ha->wq) forces pending work to run after the queue pairs have been freed. Flush the work item with cancel_work_sync() in qla25xx_free_rsp_que() after free_irq() has released the interrupt (so no new work can be queued) and before the response queue and qpair memory are freed (so the flushed handler still sees valid memory). Guard on rsp->qpair and ha->wq to match the INIT_WORK() condition and avoid operating on an uninitialized work_struct. | ||||
| CVE-2026-97535 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound VP index against VP_CTRL IOCB bitmap size The VP control IOCB selects its target virtual port by setting one bit in vp_idx_map, a fixed 16-byte (128-bit) array in both vp_ctrl_entry_24xx and vp_ctrl_entry_24xx_ext. qla25xx_ctrlvp_iocb() computes map = (vp_index - 1) / 8 and writes vce->vp_idx_map[map] without checking that map stays within the array. max_npiv_vports is taken from firmware and only sanitized to a MIN_MULTI_ID_FABRIC-aligned boundary, so it can legitimately be 191 or 255, and qla24xx_control_vp() only rejects vp_index >= max_npiv_vports. A vp_index above 128 therefore yields map >= 16 and an out-of-bounds write of up to 16 bytes past vp_idx_map, corrupting the trailing IOCB fields (or the adjacent request-ring slot on the 64-byte layout). Reject a vp_index that cannot be represented in the IOCB bitmap in qla24xx_control_vp(), and add a defensive ARRAY_SIZE() guard in qla25xx_ctrlvp_iocb() before the write. Adapters that report the usual 63 or 127 NPIV vports are unaffected. | ||||
| CVE-2026-97534 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: accurately adjust free_sections during free_segment_range In free_segment_range(), MAIN_SECS(sbi) is temporarily reduced by `secs` to restrict block allocation to the safe remaining main area while valid blocks in the truncated range are evacuated by GC. However, FREE_I(sbi)->free_sections tracks the total number of free sections across the whole filesystem. If any sections within the truncated range were already free upon entering free_segment_range(), failing to deduct them from free_sections causes the filesystem to overestimate available free sections in the active, reduced main area. This leads to inconsistent free section accounting during GC data migration and can trigger unexpected allocation failures or assertion errors when space is tight. Fix this by calculating the number of already-free sections in the truncated range, deducting them from free_sections upon entering free_segment_range(), and restoring them on exit. | ||||
| CVE-2026-97533 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm/pat: Acquire init_mm read lock on attribute changes to avoid UAF A previous commit protected against races between ptdump and CPA collapse, however one still exists between attribute changes and collapse as reported by Denis V. Lunev (linked). When an attribute change arises, a lockless page table walker obtains a PTE entry, which is later written to via set_pte_atomic(): ... -> change_page_attr_set_clr() -> __change_page_attr_set_clr() -> __change_page_attr() -> _lookup_address_cpa() -> lookup_address_in_pgd_attr() -> [ lockless page table walker ] -> set_pte_atomic() There is nothing preventing a concurrent CPA collapse which can free the PTE that was retrieved here, resulting in a use-after-free. With the mmap write lock taken on init_mm over CPA collapse, resolve this race by acquiring an mmap read lock on init_mm over __change_page_attr_set_clr(). This locks across the whole operation over which the walk and the PTE entry write occurs, solving the race. It is safe to do this here, as no spinlocks are held upon entry to __change_page_attr_set_clr(). However, the lock must not be held over an allocation, as allocation can trigger reclaim and shrinkers may call into CPA recursively, making deadlocks possible (init_mm -> ... -> fs_reclaim -> init_mm). A page table is allocated when a huge page needs to be split: -> change_page_attr_set_clr() -> __change_page_attr_set_clr() -> __change_page_attr() -> split_large_page() [ pagetable_alloc() ] -> __split_large_page() Avoid deadlocks by dropping the mmap lock across pagetable_alloc() in split_large_page() and track whether this is needed by adding a new 'init_mm_read_locked' flag to struct cpa_data. This is safe as __split_large_page() (called with locks re-established) revalidates that the page table entry is the same as it was prior to the locks being dropped and __change_page_attr() repeats the entire page table walk whenever a split occurs, so concurrent split and collapse are accounted for. Concurrent ptdump is also safe as the lock is only dropped over page table allocation during which time the page table has not yet been modified. The CPA_COLLAPSE flag is only set by set_memory_rox(), which exclusively operates upon vmalloc ranges, and on x86 only within the module mapping space. This is important, because some callers directly invoke __change_page_attr_set_clr(), bypassing this lock. However, none of these operate within the module mapping space. * cpa_process_alias() - a recursive helper called by __change_page_attr_set_clr(). * __set_memory_enc_pgtable() - operates on the direct mapping and (via __vmbus_establish_gpadl()) the vmalloc mapping space. * __set_pages_[n]p() - called by set_direct_map_[invalid, default, valid]_noflush(), __kernel_map_pages() - operates on the direct map. * kernel_[un]map_pages_in_pgd() - operates on EFI ranges. This work is based upon Denis V. Lunev's excellent analysis of the bug with gratitude. [ dhansen: move to imperative voice in changelog ] | ||||
| CVE-2026-97532 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Null out freed pointers in qla2x00_mem_alloc() error path When qla2x00_mem_alloc() fails, qla2x00_probe_one() jumps to probe_hw_failed and calls qla2x00_mem_free(). Several error labels in qla2x00_mem_alloc() freed adapter members (elsrej.c, purex_dma_pool, flt, sfp_data, loop_id_map, async_pd, sf_init_cb, ex_init_cb, npiv_info) but left the pointers dangling. qla2x00_mem_free() then freed them a second time. Worse, for the dma_pool members it issued dma_pool_free(ha->s_dma_pool, ...) after s_dma_pool had already been destroyed and set to NULL at fail_s_dma_pool, dereferencing a NULL pool. Clear each freed pointer (and its DMA handle) in the error labels so the subsequent qla2x00_mem_free() skips them. | ||||
| CVE-2026-97531 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Skip vport under deletion in report ID acquisition qla24xx_report_id_acquisition() format-1 handling walks ha->vp_list under vport_slock, takes a vref_count on the matching vport and calls qla_update_host_map() to register its port id. A vport teardown via qla24xx_vport_delete() sets VPORT_DELETE, then qla24xx_disable_vp() removes the vport from the host_map btree and zeroes vha->d_id (RESET_AL_PA). The vport is only unlinked from vp_list later, in qla24xx_deallocate_vp_id(), which clears vp_map[idx] (RESET_VP_IDX) but does not touch host_map. In the window in between, report ID acquisition can still find the vport on vp_list and call qla_update_host_map(); with d_id already zeroed it takes the btree_insert32() path and re-inserts the dying vport into host_map. Nothing cleans that entry afterwards, so once scsi_host_put() frees the vha a later host_map lookup dereferences freed memory. Skip a vport that has VPORT_DELETE set before taking the reference, so it is neither re-registered nor scheduled for DPC re-registration. This mirrors the existing guard in qla2x00_alert_all_vps(). | ||||
| CVE-2026-97530 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix soft lockup polling continuation IOCB signature qla27xx_copy_multiple_pkt() and qla27xx_copy_fpin_pkt() poll rsp_q->ring_ptr->signature for RESPONSE_PROCESSED (0xDEADDEAD) to decide whether the next continuation IOCB has arrived, spinning on cpu_relax() without advancing the ring or decrementing the entry count while it has not. response_t::signature lives at byte offset 60, but a continuation IOCB (sts_cont_entry_t / struct sts_cont_entry_ext) carries raw FC frame payload at that offset (data[56..59]). A received frame whose payload bytes happen to equal 0xDEADDEAD is therefore misread as "not yet arrived", and the loop spins forever in interrupt/DPC context, causing a CPU soft lockup. The poll is also unnecessary: callers of qla27xx_copy_multiple_pkt() (PT_LS4_UNSOL and the NVMe purls path) already gate on qla_chk_cont_iocb_avail(), which guarantees all entry_count IOCBs are present before copying begins. The sibling helper __qla_copy_purex_to_buffer() already drops the signature poll and relies on the entry_type == STATUS_CONT_TYPE guard instead. Remove the signature busy-wait from both helpers, keeping the entry_type guard, and gate the FPIN path with qla_chk_cont_iocb_avail() so it defers and re-processes on the next interrupt once all continuation IOCBs have arrived, mirroring the ELS_AUTH_ELS and PT_LS4_UNSOL arms. With this the signature field is never read on a continuation IOCB, eliminating the payload-aliasing lockup. | ||||
| CVE-2026-97529 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[] The FC BSG transport allocates job->request via memdup_user() using the exact user-supplied request_len. For FC_BSG_HST_VENDOR, fc_bsg_host_dispatch() only guarantees request_len covers msgcode and vendor_id; it does not account for the vendor_cmd[] flexible array. qla2xxx then reads the command selector vendor_cmd[0] and, in several sub-handlers, vendor_cmd[1]/[2] or structures overlaid on the vendor command area without verifying request_len. A caller holding CAP_SYS_RAWIO can submit a short request whose vendor_id matches the host, triggering out-of-bounds heap reads (KASAN-detectable, and able to mis-select a command or panic). Add a central guard in qla2x00_process_vendor_specific() so the selector is always in bounds, restrict the early vendor_cmd[0] read in qla24xx_bsg_request() to sufficiently long vendor messages, and add request_len checks to the sub-handlers that read further: qla24xx_proc_fcp_prio_cfg_cmd(), qla2x00_process_loopback(), qla84xx_reset(), qla84xx_updatefw(), qla2x00_read_optrom(), qla2x00_update_optrom(), qlafx00_mgmt_cmd() and qla28xx_validate_flash_image(). | ||||
| CVE-2026-97528 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error qla_nvme_xmt_ls_rsp() obtains uctx, which was linked into fcport->unsol_ctx_head by qla2xxx_process_purls_iocb() and is still linked when the NVMe transport calls back to transmit the LS response. On the error (out:) path the function frees uctx with kfree() but never removes it from the list. This leaves a freed node in fcport->unsol_ctx_head: the next list_add_tail() for that fcport writes through the freed node, and a subsequent list_del() can corrupt the list or panic. Unlink uctx with list_del() before kfree() on the error path, matching the other free sites in qla_nvme_release_lsrsp_cmd_kref() and qla2xxx_process_purls_pkt(). qla2x00_rel_sp() in the failure path only returns the SRB to its pool and does not invoke sp->put_fn, so the out: path is the sole free and uctx is always still linked there. | ||||
| CVE-2026-97527 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Serialize NVMe unsol ctx list with a per-fcport lock The fcport->unsol_ctx_head list is modified from several contexts without a common lock. Entries are added in qla2xxx_process_purls_iocb() from the response queue ISR (under the qpair qp_lock), while they are removed from qla2xxx_process_purls_pkt() (DPC/purex worker), qla_nvme_xmt_ls_rsp() (NVMe-FC transport callback) and qla_nvme_release_lsrsp_cmd_kref() (SRB completion). The qpair qp_lock cannot serialize this per-fcport list since multiqueue adapters add entries through different qpairs, so a concurrent add and delete (or two concurrent deletes) can corrupt the list pointers. Introduce a dedicated per-fcport spinlock, unsol_ctx_lock, initialized in qla2x00_alloc_fcport(), and take it around every list_add_tail()/list_del() on unsol_ctx_head. The add nests under the existing qp_lock; no delete path takes qp_lock, so the lock order is consistent and deadlock free. | ||||