Export limit exceeded: 22407 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22407 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72220 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: harden rq_procinfo lifecycle to prevent double-free The svc_release_rqst() function executes the callback inside rqstp->rq_procinfo->pc_release. However, if a worker thread begins processing a new request and encounters an early error path (e.g., unsupported protocol, short frame, or bad auth) before a valid rq_procinfo is installed, a stale release hook can be re-triggered against reused state from the previous RPC, resulting in a double-free or use-after-free vulnerability. Harden the lifecycle of rq_procinfo by: 1. Ensuring svc_release_rqst() always clears rq_procinfo after the optional pc_release() call, regardless of whether the hook exists. 2. Explicitly clearing rq_procinfo at request entry in svc_process() before any early decode or drop paths. 3. Ensuring svc_process_bc() does the same at backchannel entry. This guarantees that error flows will not encounter a non-NULL stale rq_procinfo pointer when there is nothing to release. | ||||
| CVE-2026-72247 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: fix zone comparison in tuple dedup The "already exists" dedup logic in __nf_conncount_add() decides whether a connection has already been counted and can be skipped instead of incrementing the connlimit count. It compares the conntrack zone of a list entry with the zone of the connection being added using nf_ct_zone_id() and nf_ct_zone_equal(), passing conn->zone.dir or zone->dir as the direction argument. Those helpers take enum ip_conntrack_dir values: IP_CT_DIR_ORIGINAL is 0 and IP_CT_DIR_REPLY is 1. However, zone->dir is a u8 bitmask: NF_CT_ZONE_DIR_ORIG is 1, NF_CT_ZONE_DIR_REPL is 2 and NF_CT_DEFAULT_ZONE_DIR is 3. Passing that bitmask as the enum direction shifts the meaning of every non-zero value. An ORIG-only zone passes 1 and is tested as REPLY, while REPL-only and default zones pass 2 or 3 and test bits beyond the valid direction range. In those cases nf_ct_zone_id() can fall back to NF_CT_DEFAULT_ZONE_ID instead of using the real zone id, so different zones can be treated as equal and dedup collapses to tuple equality alone. nf_conncount stores and compares the original-direction tuple for a connection. If an skb already has an attached conntrack entry, get_ct_or_tuple_from_skb() explicitly copies ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple, regardless of the packet's ctinfo. Therefore the zone comparison in the tuple dedup path must use IP_CT_DIR_ORIGINAL as well; the zone direction bitmask describes where a zone id applies, not which direction this conncount tuple represents. Fix the two dedup comparisons by passing IP_CT_DIR_ORIGINAL directly. Do not special-case NF_CT_DEFAULT_ZONE_DIR and do not compare raw zone ids: using the existing helpers with IP_CT_DIR_ORIGINAL preserves the direction-aware NF_CT_DEFAULT_ZONE_ID fallback. A default bidirectional zone contains the ORIG bit, so it naturally returns the real zone id; reply-only zones continue to fall back for original-direction tuple comparisons. | ||||
| CVE-2026-72248 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: support IPIP tunnel with direct xmit The combination of IPIP tunnel with direct xmit, eg. bridge device, breaks because no dst_entry is provided to check the skb headroom and to set the iph->frag_off field. This leads to invalid dst usage and can trigger a crash in the tunnel transmit path. Fix this by moving dst_cache and dst_cookie out of the runtime union so that they can be shared by neighbour, xfrm, and direct tunnel flows. For FLOW_OFFLOAD_XMIT_DIRECT tuples carrying tunnel metadata, preserve route state in these shared fields and release it through the common dst release path. Since dst_entry is now available to the three supported xmit modes and dst_release() already deals with NULL dst, remove the xmit type check in nft_flow_dst_release(). Moreover, skip the check if the dst entry is NULL in nf_flow_dst_check() which is now the case for the direct xmit case. Based on patch from Rein Wei <n05ec@lzu.edu.cn>. | ||||
| CVE-2026-72259 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8192: Release reserved memory on cleanup The MT8192 AFE probe calls of_reserved_mem_device_init() and falls back to preallocated buffers when no reserved memory region is available. When the reserved memory assignment succeeds, however, the driver never releases it. Register a devm cleanup action after a successful reserved-memory assignment so the assignment is released on probe failure and driver unbind. | ||||
| CVE-2026-72287 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Move vTPR vs. TPR Threshold consistency check into "normal" checks Move the off-by-default consistency check for vmcs12.tpr_threshold vs. the virtual APIC vTPR into the "normal" controls checks, as waiting until KVM has loaded some amount of state is unnecessary and actively dangerous. Specifically, failure to unwind vmcs01.GUEST_CR3 to KVM's value when EPT is disabled results in KVM running L1 with an L1-controlled CR3, not with KVM's CR3! Alternatively, KVM could simply reset the MMU to force a reload of vmcs01.GUEST_CR3, but the _only_ reason the check was shoved into a "late" flow was to wait until the vmcs12 pages were retrieved. Rather than build up more crusty code, simply access vTPR using a regular guest memory access (performance isn't a concern). To circumvent the restrictions that led to KVM deferring nested_get_vmcs12_pages(), (a) use a VM-scoped API to read guest memory so that it always hits non-SMM memslots (for RSM), and (b) skip the check (since its off-by-default anyways) when the vCPU doesn't want to run, i.e. when userspace is restoring/stuffing state. If reading guest memory fails, simply skip the consistency check, as KVM's de facto ABI is that VMX instruction accesses to non-existent memory get PCI Bus Error semantics, where reads return 0xFFs. And if vTPR=0xFF, then the vTPR is guaranteed to be greater than or equal to TPR_THRESHOLD. | ||||
| CVE-2026-72308 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: fix refcount leak in mlxsw_sp_port_lag_join() When mlxsw_sp_port_lag_index_get() fails, mlxsw_sp_port_lag_join() returns an error without releasing the lag reference obtained by the earlier mlxsw_sp_lag_get(). All other error paths in the function jump to the cleanup label that ends with mlxsw_sp_lag_put(), so this is a single missed release. Fix the leak by replacing the bare 'return err' with a goto to the existing error cleanup label, which will drop the reference safely. | ||||
| CVE-2026-72430 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix nf_connlabels leak on two error paths tcf_ct_fill_params() calls nf_connlabels_get() (setting put_labels) when TCA_CT_LABELS is present, but two later error sites use a bare return instead of "goto err", skipping the err: nf_connlabels_put() cleanup. They also precede the "p->put_labels = put_labels" assignment, so the tcf_ct_params_free() fallback does not release the count either. Each failed RTM_NEWACTION on these paths leaks one nf_connlabels reference: net->ct.labels_used is incremented and never released. The action is reachable with CAP_NET_ADMIN over the netns, i.e. from an unprivileged user namespace on default-userns kernels. Impact: an unprivileged user with CAP_NET_ADMIN over a network namespace (e.g. via user namespaces) leaks one nf_connlabels reference per failed RTM_NEWACTION on the two error paths; net->ct.labels_used is never released. The err: label is safe to reach from both sites: p->tmpl is still NULL there (kzalloc'd, not yet assigned) and nf_ct_put(NULL) is a no-op, so no inline release is needed. | ||||
| CVE-2026-72472 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfs: use nfsi->rwsem to protect traversal of the file lock list Lingfeng identified a bug and suggested two solutions, but both appear to have issues. Generally, we cannot release flc_lock while iterating over the file lock list to avoid use-after-free (UAF) problems with file locks. However, functions like nfs_delegation_claim_locks and nfs4_reclaim_locks cannot adhere to this rule because recover_lock or nfs4_lock_delegation_recall may take a long time. To resolve this, NFS switches to using nfsi->rwsem for the same protection, and nfs_reclaim_locks follows this approach. Although nfs_delegation_claim_locks uses so_delegreturn_mutex instead, this is inadequate since a single inode can have multiple nfs4_state instances. Therefore, the fix is to also use nfsi->rwsem in this case. Furthermore, after commit c69899a17ca4 ("NFSv4: Update of VFS byte range lock must be atomic with the stateid update"), the functions nfs4_locku_done and nfs4_lock_done also break this rule because they call locks_lock_inode_wait without holding nfsi->rwsem. Simply adding this protection could cause many deadlocks, so instead, the call to locks_lock_inode_wait is moved into _nfs4_proc_setlk. Regarding the bug fixed by commit c69899a17ca4 ("NFSv4: Update of VFS byte range lock must be atomic with the stateid update"), it has been resolved after commit 0460253913e5 ("NFSv4: nfs4_do_open() is incorrectly triggering state recovery") because all slots are drained before calling nfs4_do_reclaim, which prevents concurrent stateid changes along this path. Also, nfs_delegation_claim_locks does not cause this concurrency either since when _nfs4_proc_setlk is called with NFS_DELEGATED_STATE, no RPC is sent, so nfs4_lock_done is not called. Therefore, nfs4_lock_delegation_recall from nfs_delegation_claim_locks is the first time the stateid is set. | ||||
| CVE-2026-72098 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: dm-verity: fix buffer overflow in FEC calculation There's a buffer overflow in dm-verity-fec: if (neras && *neras <= v->fec->roots) fio->erasures[(*neras)++] = i; This allows *neras to reach roots + 1 (the post-increment pushes it past roots). This value is then passed as no_eras to decode_rs8(). Inside the RS decoder (lib/reed_solomon/decode_rs.c:113-121), the erasure locator polynomial loop writes lambda[j] where j can reach nroots + 1 — one element past the end of lambda[] (which is sized nroots + 1, valid indices 0..nroots). The out-of-bounds write lands on syn[0], corrupting the syndrome buffer. | ||||
| CVE-2026-72102 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm_early_create: fix freeing used table on dm_resume failure If dm_resume fails, the kernel attempts to free table with dm_table_destroy, but the table was already instantiated with dm_swap_table. This commit skips the call to dm_table_destroy in this case. | ||||
| CVE-2026-72105 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm-log: fix a bitset_size overflow on 32bit machines Commit c20e36b7631d ("dm log: fix out-of-bounds write due to region_count overflow") made sure that region_count could fit in an unsigned int. But the bitmap memory isn't allocated based on region_count. It uses bitset_size (a size_t variable). The first step of calculating bitset_size is to set it to region_count, rounded up to a multiple of BITS_PER_LONG. If region_size is less than BITS_PER_LONG smaller than UINT_MAX, it will get rounded up to 2^32. On a 32bit architecture, this will make bitset_size wrap around to 0 and fail, despite region_count being valid. Since bitset_size gets divided by 8, it can hold any valid region_count. It just needs a special case to handle the rollover. If it is 0, the value rolled over, and bitset size should be set to the number of bytes needed to hold 2^32 bits. | ||||
| CVE-2026-72108 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm thin metadata: fix metadata snapshot consistency on commit failure __reserve_metadata_snap() and __release_metadata_snap() modify the superblock's held_root directly in the block_manager's buffer. If the subsequent metadata commit fails, the held_root gets flushed to disk through the abort_transaction path, resulting in inconsistent metadata. Reproducer 1: __reserve_metadata_snap() 1. Create a 2 MiB metadata device and make the region after the 14th block inaccessible, to trigger metadata commit failure in the subsequent reserve_metadata_snap operation. The 14th block will be the shadow destination for the index block. dmsetup create tmeta --table "0 112 linear /dev/sdc 0 112 3984 error" 2. Create a 16 MiB thin-pool dmsetup create tdata --table "0 32768 zero" dd if=/dev/zero of=/dev/mapper/tmeta bs=4k count=1 dmsetup create tpool --table "0 32768 thin-pool /dev/mapper/tmeta \ /dev/mapper/tdata 128 0 1 skip_block_zeroing" 3. Take a metadata snapshot to trigger metadata commit failure and transaction abort. However, the held_root is written to disk, breaking metadata consistency. dmsetup message tpool 0 "reserve_metadata_snap" thin_check v1.2.2 result: Bad reference count for metadata block 6. Expected 2, but space map contains 1. Bad reference count for metadata block 7. Expected 2, but space map contains 1. Bad reference count for metadata block 13. Expected 1, but space map contains 0. Reproducer 2: __release_metadata_snap() 1. Create a 2 MiB metadata device and make the region after the 16th block inaccessible, to trigger metadata commit failure in the subsequent release_metadata_snap operation. The 16th block will be the shadow destination for the index block. dmsetup create tmeta --table "0 128 linear /dev/sdc 0 128 3968 error" 2. Create a 16 MiB thin-pool dmsetup create tdata --table "0 32768 zero" dd if=/dev/zero of=/dev/mapper/tmeta bs=4k count=1 dmsetup create tpool --table "0 32768 thin-pool /dev/mapper/tmeta \ /dev/mapper/tdata 128 0 1 skip_block_zeroing" 3. Reserve then release the metadata snapshot, to trigger metadata commit failure and transaction abort. The held_root gets removed from the on-disk superblock, causing inconsistent metadata. dmsetup message tpool 0 "reserve_metadata_snap" dmsetup message tpool 0 "release_metadata_snap" thin_check v1.2.2 result: Bad reference count for metadata block 6. Expected 1, but space map contains 2. Bad reference count for metadata block 7. Expected 1, but space map contains 2. 1 metadata blocks have leaked. Fix by deferring the held_root update to commit time. Additionally, move the existing-snapshot check in __reserve_metadata_snap before the shadow operation to avoid unnecessary work. In __release_metadata_snap, clear pmd->held_root before btree deletion so partial failure leaks blocks rather than leaving a stale reference, and unlock the snapshot block before decrementing its refcount. | ||||
| CVE-2026-72110 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf,fork: wipe ->bpf_storage before bailouts that access it Currently, copy_process() can bail out to free_task() before p->bpf_storage has been initialized, with this call graph (shown here for the !CONFIG_MEMCG case): copy_process dup_task_struct arch_dup_task_struct [copies the entire task_struct, including ->bpf_storage member] [RLIMIT_NPROC check fails] delayed_free_task free_task bpf_task_storage_free rcu_dereference(task->bpf_storage) bpf_local_storage_destroy In this case, the nascent task's ->bpf_storage member that bpf_local_storage_destroy() operates on is a plain copy of the parent's ->bpf_storage pointer, not a real initialized pointer. This leads to badness (kernel hangs, UAF). This is reachable as long as the process calling fork() has been inserted into a task storage map. | ||||
| CVE-2026-72111 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reset register bounds before narrowing retval range in check_mem_access() When the BPF verifier processes a context load of an LSM hook return value, it calls __mark_reg_s32_range() to narrow the register to the hook's valid range. However, __mark_reg_s32_range() intersects the new range with the register's existing bounds using max_t()/min_t() rather than replacing them. If the destination register carries stale bounds from a prior instruction (e.g. BPF_MOV64_IMM), the intersection can produce a range narrower than reality. The verifier then believes it knows the register's exact value, while at runtime the actual hook return value is loaded, creating a verifier/runtime mismatch that can be used to bypass BPF memory safety checks. The else branch already calls mark_reg_unknown() to reset register state before any narrowing. Apply the same reset in the is_retval path so stale bounds are cleared before __mark_reg_s32_range() intersects. | ||||
| CVE-2026-72112 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/bpf-ops: reject re-registration of an already-bound ops io_install_bpf() only rejects a second registration on the ctx side (ctx->bpf_ops) and sets the per-map back-pointer ops->priv unconditionally. The struct_ops link path never advances a map past BPF_STRUCT_OPS_STATE_READY, so the same io_uring_bpf_ops map can be registered more than once, and bpf_io_reg() re-resolves the target ring via fget(ops->ring_fd) on every call. A caller can therefore point the same ring_fd at a different io_ring_ctx between two BPF_LINK_CREATE calls. The second registration passes the ctx->bpf_ops check (the new ctx has none) and overwrites ops->priv, orphaning the first ctx. Teardown (io_eject_bpf()/bpf_io_unreg()) only reaches a ctx through ops->priv, so the orphaned ctx is never torn down: its ctx->loop_step keeps pointing into the struct_ops trampoline, which is freed once the map is gone. A later io_uring_enter() on the orphaned ring then calls the dangling ctx->loop_step from io_run_loop() -- a use-after-free of freed executable memory, reachable by a task with CAP_BPF + CAP_PERFMON. Reject registration when ops->priv is already set, as hid_bpf_reg() does for its struct_ops. | ||||
| CVE-2026-74578 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: algif_skcipher - force synchronous processing on trees without ctx->state The AIO/async path in skcipher_recvmsg() passes the socket-wide ctx->iv directly into the skcipher request. After io_submit() the socket lock is dropped and the request is processed asynchronously, so a concurrent sendmsg(ALG_SET_IV) can overwrite ctx->iv and make the in-flight request run under an attacker-controlled IV. For CTR/stream modes this is IV/keystream reuse and lets an unprivileged user recover the plaintext of a concurrent operation. Snapshotting ctx->iv into per-request storage for the async path is not sufficient. For ciphers with statesize == 0 - which includes cbc and ctr - the MSG_MORE inter-chunk IV chaining is carried solely by the in-place req->iv writeback, which a snapshot redirects into per-request memory that af_alg_free_resources() releases on completion, silently producing wrong output. Writing the IV back from the completion callback instead is not possible either: that would require lock_sock() there, but the callback can run in softirq/atomic context, so it must not sleep. Make the operation synchronous instead, which removes both the IV race and any writeback race. This is equivalent to the upstream resolution, commit fcc77d33a34c ("net: Remove support for AIO on sockets"), which removed the AIO socket path across net/ entirely and so produces the same end state for this file. This patch deviates from that commit deliberately: rather than removing AIO socket support tree-wide, which would be far too invasive for stable, it removes only the AIO branch in crypto/algif_skcipher.c. io_submit() now completes synchronously; AF_ALG async is rarely used in practice. The -EIOCBQUEUED check in skcipher_recvmsg() is now dead but harmless, and is left alone to keep the fix minimal. Tested on 6.6.y: attacker IV injection dropped from 2296/200000 to 0/200000 after the change; MSG_MORE chunked CTR output bit-identical to single-shot. | ||||
| CVE-2026-72122 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all mutate both fields under that same lock. Because the lockless reads and the locked writes are unordered with respect to each other, a racing bcm_notify() (device unregister) or bcm_connect() (concurrent bind on another thread sharing the socket) can make bcm_sendmsg() observe an inconsistent combination, e.g. a stale bound=1 together with the now-cleared ifindex=0, silently turning a socket bound to a specific CAN interface into one that also matches "any" interface. Keep the lockless bo->bound check purely as a fast-path reject, and move the ifindex read (and a bo->bound re-check) into the locked section, where every writer already serializes. This removes the possibility of observing the two fields torn against each other, rather than trying to fix it with more READ_ONCE()/WRITE_ONCE() pairs on two independently updated fields. Annotate the now-purely-lockless bo->bound accesses consistently across all its write sites. Also fix bcm_rx_setup() silently returning success when the target device disappears concurrently instead of reporting -ENODEV, so a broken RX op is no longer left registered as if it had succeeded. | ||||
| CVE-2026-72127 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netdev-genl: report NAPI thread PID in the caller's pid namespace netdev_nl_napi_fill_one() reports the NAPI kthread PID in NETDEV_A_NAPI_PID using task_pid_nr(), which returns the PID in the initial pid namespace. NETDEV_CMD_NAPI_GET does not have GENL_ADMIN_PERM and the netdev genl family is netnsok, so a caller in a child pid namespace can issue it. That caller then sees the kthread's global PID, even though the kthread is not visible in its pid namespace, where the value should be 0. Translate the PID through the caller's pid namespace, the same way commit 3799c2570982 ("io_uring/fdinfo: translate SqThread PID through caller's pid_ns") did for the io_uring SQPOLL thread. The doit and dumpit paths both run synchronously in the caller's context, so task_active_pid_ns(current) is the caller's pid namespace. | ||||
| CVE-2026-72128 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix refcount leak in nvmet_sq_create() In nvmet_sq_create(), a reference on the ctrl is taken via kref_get_unless_zero() before calling nvmet_check_sqid(). If nvmet_check_sqid() fails, the function returns the error directly without releasing the reference, leading to a leak. Fix this by jumping to the "ctrl_put" label, which already performs the necessary nvmet_ctrl_put(ctrl). This ensures the reference is properly released on this error path. | ||||
| CVE-2026-74494 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: reject repeated SMB2 NEGOTIATE requests Unauthenticated client can send multiple successful SMB2 NEGOTIATE requests on one connection before SESSION_SETUP. While the connection is in KSMBD_SESS_NEED_SETUP, smb2_handle_negotiate() accepts another SMB3.1.1 NEGOTIATE and overwrites conn->preauth_info with a new allocation. Only the final allocation is freed when the connection is released, leaking one object for every additional successful request. A repeated SMB2 NEGOTIATE after a dialect has been selected is a protocol violation. MS-SMB2 section 3.3.5.4 requires the server to disconnect without replying in this case. Set the connection exiting when rejecting the request, in addition to suppressing the response. Reject SMB2 NEGOTIATE unless the connection is new or is waiting for the SMB2 NEGOTIATE that follows an SMB1 multi-protocol negotiate. Serialize both SMB1 and SMB2 negotiation paths under conn->srv_mutex, since they update connection-wide dialect and negotiation state. Move the locking contract to ksmbd_smb_negotiate_common(), where the state and dialect are selected, and add ksmbd_conn_new() for consistent state access. | ||||