Export limit exceeded: 22407 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22407 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72188 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: sanitize MFT references returned from ntfs_lookup_inode_by_name() ntfs_lookup_inode_by_name() returns MFT references read from directory index entries on disk. These values are untrusted, but the function can currently return an error-marked MFT reference to its callers without validating it. Callers later decode lookup failures with MREF_ERR(). A crafted NTFS image can set the MREF error bit while leaving the low bits as an arbitrary value, causing callers to consume a bogus pseudo-errno instead of treating the lookup result as corrupted on-disk metadata. Fix this at the source by normalizing every error-marked MFT reference returned from ntfs_lookup_inode_by_name() to ERR_MREF(-EIO). Apply this to all four directory lookup return paths so every caller gets a validated result without needing additional checks or an API change. This keeps the sanitization in the common lookup helper, which is cleaner than duplicating validation in each caller. | ||||
| CVE-2026-72199 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: validate resident index root values on lookup Resident $INDEX_ROOT values carry index header fields that callers consume after lookup. Some callers already validate parts of the layout before walking entries, but those checks are scattered and do not cover all root header invariants, such as entries_offset alignment and lower bound, index_length, and allocated_size consistency. The resident root resize paths now keep these header fields consistent while the value size changes: ntfs_ir_truncate() lowers index.allocated_size before shrinking the resident value, and ntfs_ir_reparent() grows the resident value before publishing a larger root header. Lookup-time validation can therefore cover these invariants without tripping over the driver's own resize paths. Add $INDEX_ROOT to the minimum resident value size table and validate the resident index header fields before returning the attribute from lookup. Require 8-byte aligned index header fields, a sane entries_offset, an index_length within allocated_size, allocated_size within the resident value, and enough entry space for at least an index entry header. The shared validator already rejects non-resident records for resident-only attribute types, including $INDEX_ROOT. | ||||
| CVE-2026-72211 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: grow index root value before reparent header update ntfs_ir_reparent() moves the resident index root entries into an index block and leaves a small root stub containing the child VCN. That root stub can be larger than the existing resident value. For example, an empty root with value_length 48 has an index area of 32 bytes, while the large-index root stub needs index_length and allocated_size of 40 bytes. The current code publishes the larger index.index_length and index.allocated_size before resizing the resident value. If the resize returns -ENOSPC, the recovery path can call ntfs_inode_add_attrlist(), which looks attributes up again while the root header says allocated_size 40 but the resident value still only provides 32 bytes of index area. Lookup-time $INDEX_ROOT validation then correctly rejects that transient layout as corrupt. This reproduces as a generic/013 failure under qemu. In the failing run, the transient root had value_len=48, index_size=32, index_length=40, and allocated_size=40, and ntfsprogs-plus ntfsck reported "Corrupt index root in MFT record 1177". When the root stub grows, resize the resident value before publishing the larger root header. If the resize fails, the old root remains valid for recovery lookups. Keep the existing header-before-resize ordering for shrink or same-size cases so the resident value never temporarily exposes an allocated_size beyond its bounds. | ||||
| CVE-2026-72218 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: lockd: Plug nlm_file refcount leak on cached nlm_do_fopen() failure The cached-file path in nlm_lookup_file() reaches the found: label unconditionally, even when nlm_do_fopen() fails. At that label *result and file->f_count are updated before the error is returned. The wrappers nlm3svc_lookup_file() and nlm4svc_lookup_file() then bail out of their switch without copying *result back to their caller, so the proc handler's local nlm_file pointer remains NULL and the cleanup path skips nlm_release_file(). The f_count increment is never released, and nlm_traverse_files() can no longer reap the file because its refcount never returns to zero between requests. Short-circuit the cached path so neither *result nor f_count is touched when nlm_do_fopen() fails on a hashed nlm_file. | ||||
| CVE-2026-72231 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: avoid request storms during pending request batadv_send_tt_request() allocates a tt_req_node when none exists for the destination originator node. This should prevent that a multiple TT requests are send at the same time to an originator. But if allocation of the send buffer failed, this request must be cleaned up again. But indicator for such a failure is "ret == false". But the actual implementation is checking for "ret == true". The check must be inverted to not loose the information about the TT request directly after it was attempted to be sent out. This should avoid potential request storms. | ||||
| CVE-2026-72237 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd/brs: Fix kernel address leakage A user-only branch stack can contain branches that originate from the kernel. As a result, kernel addresses are exposed to user space even when PERF_SAMPLE_BRANCH_USER is requested. On AMD processors supporting X86_FEATURE_BRS (Zen 3 only), perf can still report entries such as SYSRET/interrupt returns for which the branch-from addresses are in the kernel. E.g. $ perf record -j any,u -c 4000 -e branch-brs -o - -- \ perf bench syscall basic --loop 1000 | \ perf script -i - -F brstack|tr ' ' '\n'| \ grep -E '0x[89a-f][0-9a-f]{15}' ... 0xffffffff810001c4/0x72e2e32955eb/-/-/-/0//- 0xffffffff810001c4/0x72e2d94a9821/-/-/-/0//- 0xffffffff810001c4/0x72e2d94ffa1b/-/-/-/0//- ... BRS provides no hardware branch filtering, so privilege level filtering is performed entirely in software. However, amd_brs_match_plm() only validates the branch-to address against the requested privilege levels. For branches from the kernel to user space, the branch-from address is left unchecked and is leaked. Extend the software filter to also validate the branch-from address, so that any branch record whose branch-from address is in the kernel is dropped when PERF_SAMPLE_BRANCH_USER is requested. | ||||
| CVE-2026-72244 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gpu/buddy: bail out of try_harder when alignment cannot be honoured The try_harder contiguous fallback could return a range whose start offset did not match the caller's min_block_size. When a candidate's start is misaligned, realign it: free the misaligned run and reallocate exactly @size at the next lower min_block_size boundary. This keeps the returned size unchanged with no surplus to trim, and rejects the request only when no aligned candidate fits. v2: align misaligned candidates down to min_block_size instead of bailing out, for both the RHS and LHS paths (Matthew). | ||||
| CVE-2026-72422 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of conn->preauth_info in concurrent SMB2 NEGOTIATE conn->preauth_info is shared connection state (struct preauth_integrity_info, kmalloc-96) that is allocated and freed by the SMB2 NEGOTIATE handler and read by the response send path. smb2_handle_negotiate() allocates conn->preauth_info, and on a deassemble_neg_contexts() failure kfrees it and sets it to NULL. Both the allocation and the free/NULL happen under ksmbd_conn_lock(conn) (the connection srv_mutex), which is held across the whole handler body. The response send path smb3_preauth_hash_rsp(), called from the send: block of __handle_ksmbd_work(), reads conn->preauth_info and dereferences conn->preauth_info->Preauth_HashValue (via ksmbd_gen_preauth_integrity_hash()) without taking conn_lock. When a client drives two SMB2 NEGOTIATE requests on the same connection, one worker can free conn->preauth_info on the failing-negotiate path while a concurrent send-path worker is reading it, producing a slab use-after-free read (KASAN-confirmed). The send-path read tested conn->preauth_info for NULL but raced with the free that occurs between the NULL check and the dereference, so the NULL guard alone does not close the window. Serialize the NEGOTIATE-branch read in smb3_preauth_hash_rsp() under ksmbd_conn_lock(conn) and re-check conn->preauth_info inside the lock. Because the negotiate handler holds conn_lock across its kfree + NULL assignment, a reader that also takes conn_lock either runs fully before the allocation or fully after the NULL store, and can never observe the freed-but-not-yet-NULLed pointer. ksmbd_gen_preauth_integrity_hash() takes no locks itself (it only computes a SHA-512 over the buffer), so no lock-ordering inversion is introduced, and conn_lock is a sleepable mutex which is safe on this send path (it already performs network I/O). | ||||
| CVE-2026-72433 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_meta_bridge: fix NFT_META_BRI_IIFPVID stack leak This needs to test for nonzero retval. | ||||
| CVE-2026-72436 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: Don't use test_bit() in lockless RCU readers in hash types Sashiko pointed out that there are a few lockless RCU readers using test_bit() which is a relaxed atomic operation and provides no memory barrier guarantees. Use test_bit_acquire() instead where the operation may run parallel with add/del/gc, i.e. is not one from the next cases - protected by region lock - in a set destroy phase - in a new/temporary set creation phase | ||||
| CVE-2026-53365 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix zerocopy completion for multi-skb sends When a large message is fragmented into multiple skbs, the zerocopy uarg is only allocated and attached to the last skb in the loop. Non-final skbs carry pinned user pages with no completion tracking, so the kernel has no way to notify userspace when those pages are safe to reuse. If the loop breaks early the uarg is never allocated at all, leaking pinned pages with no completion notification. Fix this by following the approach used by TCP: allocate the zerocopy uarg (if not provided by the caller) before the send loop and attach it to every skb via skb_zcopy_set(), which takes a reference per skb. Each skb's completion properly decrements the refcount, and the notification only fires after the last skb is freed. On failure, if no data was sent, the uarg is cleanly aborted via net_zcopy_put_abort(). This issue was initially discovered by sashiko while reviewing commit 1cb36e252211 ("vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting") but was pre-existing. | ||||
| CVE-2026-11383 | 3 Ibm, Linux, Microsoft | 7 Aix, I, Tivoli System Automation Application Manager and 4 more | 2026-08-18 | 5.4 Medium |
| IBM Tivoli System Automation Application Manager 4.1 and IBM WebSphere Application Server is affected by cross-site scripting in the Administrative Console. | ||||
| CVE-2026-11707 | 3 Ibm, Linux, Microsoft | 7 Aix, I, Tivoli System Automation Application Manager and 4 more | 2026-08-18 | 9.3 Critical |
| IBM Tivoli System Automation Application Manager 4.1 and IBM WebSphere Application Server is affected by a cross-site scripting vulnerability in the administrative console login page. | ||||
| CVE-2026-64117 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb ieee80211_invoke_fast_rx() reads RX status through IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the unicast forward path, mesh_data does: info = IEEE80211_SKB_CB(fwd_skb); memset(info, 0, sizeof(*info)); on the same skb the caller still names via rx->skb, then either queues the skb for TX (success) or kfree_skb()'s it (no-route) before returning RX_QUEUED. The caller's RX_QUEUED arm then calls sta_stats_encode_rate(status) on memory that is either zeroed (success path) or freed (no-route path). The latter is KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle. Fix by encoding the rate from status before invoking ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value captured while status was still backed by valid memory. | ||||
| CVE-2026-64138 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate SID in parent security descriptor during ACL inheritance Introduce smb_validate_ntsd_sid() helper to safely validate Owner SID and Group SID inside the NT Security Descriptor (smb_ntsd) retrieved from the parent directory. | ||||
| CVE-2026-64139 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix SID memory leak in set_posix_acl_entries_dacl() on overflow Commit 299f962c0b02 ("ksmbd: use check_add_overflow() to prevent u16 DACL size overflow") added check_add_overflow() guards that break out of the ACE-building loops in set_posix_acl_entries_dacl() when the accumulated DACL size would wrap past 65535. However, each iteration allocates a struct smb_sid via kmalloc_obj() at the top of the loop and relies on the kfree(sid) call at the end of the loop body (the 'pass_same_sid' label in the first loop, and the explicit kfree at the tail of the second loop) to release it. The newly introduced 'break' statements bypass those kfree() calls, leaking the sid buffer every time an overflow is detected. A malicious or malformed file with enough POSIX ACL entries to trip the overflow check will leak one or more struct smb_sid allocations on every request that touches the file's DACL, providing a trivial kernel memory exhaustion vector. Free sid before breaking out of the loops to plug the leak. | ||||
| CVE-2026-64140 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix null pointer dereference in proc_show_files() When a SMB2 client opens a file with a durable v2 handle and then issues SMB2 SESSION_LOGOFF, session_fd_check() clears fp->tcon = NULL on the reconnectable file pointer but leaves the fp registered in global_ft.idr until the durable scavenger fires (up to fp->durable_timeout seconds later). During that window any read of /proc/fs/ksmbd/files (mode 0400) panics the kernel because proc_show_files() walks global_ft.idr and unconditionally dereferences fp->tcon->id with no NULL guard. Reproducer requires only a successful SMB2 SESSION_SETUP and a share configured with 'durable handles = yes'. KASAN report on mainline 70390501d194: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:proc_show_files+0x118/0x740 Call Trace: proc_show_files+0x118/0x740 seq_read_iter+0x4ef/0xe10 proc_reg_read_iter+0x1b7/0x280 ... Guard the dereference. A durable-disconnected fp legitimately has no tcon; report its tree id as 0 rather than oopsing. | ||||
| CVE-2026-64141 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix null pointer dereference in compare_guid_key() session_fd_check() walks the per-inode m_op_list during durable-handle session teardown and sets op->conn = NULL for every opinfo whose conn matched the closing session's connection. The matching opinfo, however, stays linked in its per-ClientGuid lease_table_list entry's lb->lease_list because destroy_lease_table() only runs on full TCP-connection teardown, not on SESSION_LOGOFF. If the same TCP connection then negotiates a fresh session with the same ClientGuid (ClientGuid is bound to NEGOTIATE, not the session, and is unchanged across LOGOFF + SETUP) and issues a SMB2 CREATE with a lease context on a different inode, find_same_lease_key() walks lb->lease_list, reaches the stale opinfo, and calls compare_guid_key(), which unconditionally dereferences opinfo->conn->ClientGUID. The conn pointer is NULL and the kernel panics. Reproducer requires only a successful SMB2 SESSION_SETUP and a share configured with 'durable handles = yes'. KASAN report on mainline 70390501d194: general protection fault, probably for non-canonical address 0xdffffc0000000069: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000348-0x000000000000034f] Workqueue: ksmbd-io handle_ksmbd_work RIP: 0010:bcmp+0x5b/0x230 Call Trace: compare_guid_key+0x4b/0xd0 find_same_lease_key+0x324/0x690 smb2_open+0x6aea/0x8e60 handle_ksmbd_work+0x796/0xee0 ... Faulting address 0x348 is the offset of ClientGUID within struct ksmbd_conn, confirming opinfo->conn was NULL. Read opinfo->conn once and bail out if it has been cleared by a concurrent session_fd_check(). A half-detached opinfo cannot be the owner of an active lease, so returning 0 is the correct match result. | ||||
| CVE-2026-64600 | 2 Linux, Redhat | 8 Linux Kernel, Enterprise Linux, Enterprise Linux Eus and 5 more | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: resample the data fork mapping after cycling ILOCK xfs_reflink_fill_{cow_hole,delalloc} are both presented with an inode, a data fork mapping, and a cow fork mapping. Unfortunately, these two helpers cycle the ILOCK to grab a transaction, which means that the mappings are stale as soon as we reacquire the ILOCK. Currently we refresh the cow fork mapping by re-calling xfs_find_trim_cow_extent, but we don't refresh the data fork mapping beforehand, which means that the xfs_bmap_trim_cow in that function queries the refcount btree about the wrong physical blocks and returns an inaccurate value in *shared. If *shared is now false, the directio write proceeds with a stale data fork mapping. Fix this by querying the data fork mapping if the sequence counter changes across the ILOCK cycle. | ||||
| CVE-2026-53016 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - copy IV using skcipher ivsize AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver. ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV buffer while RFC3686 skciphers expose an 8-byte IV, so the restore overruns the provided buffer. Use crypto_skcipher_ivsize() to copy only the algorithm's IV length. | ||||