Export limit exceeded: 10217 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10217 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64692 | 1 Apple | 7 Ios And Ipados, Ipados, Iphone Os and 4 more | 2026-08-17 | 7.1 High |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. An app may be able to cause a denial-of-service. | ||||
| CVE-2026-72232 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: ensure minimal ethernet header on TX As documented in commit 8bd67ebb50c0 ("net: bridge: xmit: make sure we have at least eth header len bytes"), it is possible by for a local user with eBPF TC hook access to attach a tc filter which truncates the packet and redirects to an batadv interface. But the code assumes that at least ETH_HLEN bytes are available and thus might read outside of the available buffer. The batadv_interface_tx() must therefore always check itself if enough data is available for the ethernet header and don't rely on min_header_len. | ||||
| CVE-2026-72019 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: macsec: don't read an unset MAC header in macsec_encrypt() macsec_encrypt() reads the Ethernet header via eth_hdr(skb) (skb->head + skb->mac_header) to memmove() the 12 source/destination MAC bytes forward and make room for the SecTAG. On the AF_PACKET SOCK_RAW + PACKET_QDISC_BYPASS transmit path the skb reaches the macsec ndo_start_xmit() with the MAC header unset, so eth_hdr(skb) resolves to skb->head + (u16)~0 and the read is out of bounds: a 12-byte heap over-read that is also emitted on the wire as the frame's outer source/destination MAC. KASAN reports a slab-out-of-bounds read in macsec_start_xmit() on 6.0; on current mainline a CONFIG_DEBUG_NET build flags it as an unset mac header in skb_mac_header(). On the TX path the L2 header is at skb->data, so use skb_eth_hdr(), added by commit 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()") for exactly this purpose. | ||||
| CVE-2026-72084 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: Bound PR-OUT TransportID parsing to the received buffer core_scsi3_decode_spec_i_port() and core_scsi3_emulate_register_and_move() hand the raw PERSISTENT RESERVE OUT parameter buffer to target_parse_pr_out_transport_id() without telling it how many bytes are valid. For an iSCSI TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() locates the ",i,0x" ISID separator with an unbounded strstr() (and on the error path prints the name with a further unbounded "%s"). An initiator can submit a TransportID whose iSCSI name contains neither a ",i,0x" substring nor a NUL terminator, filling the parameter list to its end, so the scan runs off the end of the buffer. When the parameter list spans more than one page the buffer is a multi-page vmap (transport_kmap_data_sg()), so the over-read walks into the trailing vmalloc guard page and oopses (KASAN: vmalloc-out-of-bounds in strstr). It is reachable by any fabric that delivers a PR OUT to a device exported through an iSCSI TPG, including a guest via vhost-scsi. Pass the number of received bytes down to the parser and validate the iSCSI TransportID's own self-described length (ADDITIONAL LENGTH + 4) once, up front: reject it if it is below the spc4r17 minimum or larger than the received buffer, then bound the separator search, the ISID walk and the name copy by that length. This is the length check the callers already perform after the parse (core_scsi3_decode_spec_i_port() compares tid_len against tpdl, core_scsi3_emulate_register_and_move() validates it against data_length), moved ahead of the scan. Also drop the unbounded "%s" of the unterminated name. Add per-format explicit name-length checks before copying into i_str, rather than silently truncating with min_t: for FORMAT CODE 00b reject if the descriptor body (tid_len - 4 bytes) cannot fit in i_str[TRANSPORT_IQN_LEN]; for FORMAT CODE 01b reject if the name portion (from &buf[4] up to the separator) cannot fit. Both checks make the bounds intent explicit at each format branch. While here, also reject a FORMAT CODE 01b TransportID whose ",i,0x" separator sits at the very end of the descriptor: that leaves an empty ISID and points the returned port nexus pointer at buf + tid_len, one past the descriptor, which the registration code (__core_scsi3_locate_pr_reg(), __core_scsi3_alloc_registration()) then dereferences as the ISID string -- the same over-read of the parameter buffer for a malformed descriptor. | ||||
| CVE-2026-16861 | 1 Ibm | 1 I | 2026-08-17 | 5.3 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to an out-of-bounds read. | ||||
| CVE-2026-72296 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: ife: require ETH_HLEN to be pullable in ife_decode() ife decode may return after making only the outer IFE header and metadata pullable. The caller then passes the decapsulated packet to eth_type_trans(), which expects the inner Ethernet header to be accessible from the linear data area. With a malformed IFE frame, the inner Ethernet header may still be shorter than ETH_HLEN in the linear area, which can lead to a crash in the original code. Fix this by extending the pull check in ife_decode() so that the inner Ethernet header is also guaranteed to be pullable before returning. | ||||
| CVE-2026-72303 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-control: Validate notification payload size Validate MODULE_NOTIFICATION payload length before reading bytes/channel data in control update handling. | ||||
| CVE-2026-73434 | 2 Gstreamer, Redhat | 2 Gstreamer, Enterprise Linux | 2026-08-17 | 6.1 Medium |
| A flaw was found in GStreamer gst-plugins-good (avidemux). In gst_avi_demux_riff_parse_vprp(), the number of available gst_riff_vprp_video_field_desc entries is calculated by dividing the remaining buffer size by the attacker-controlled vprp->fields value, rather than by sizeof(gst_riff_vprp_video_field_desc). This can cause the parser to treat more field descriptors as available than fit in the input buffer, resulting in out-of-bounds reads. Processing a crafted AVI via playbin/decodebin can crash the application (denial of service). Fixed upstream in gst-plugins-good 1.28.6 (GStreamer-SA-2026-0072). | ||||
| CVE-2026-72029 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: bound device offsets in the MUX downlink decoder mux_dl_adb_decode() walks a chain of aggregated datagram tables using offsets and lengths taken from the modem. first_table_index, next_table_index, table_length, datagram_index and datagram_length are all device supplied le values. Only first_table_index was checked, and only for being non zero. The decoder then formed adth = block + adth_index and read the table header and the datagram entries with no bound against the received skb. A modem that reports an index or a length past the downlink buffer makes the decoder read out of bounds. The buffer is IPC_MEM_MAX_DL_MUX_LITE_BUF_SIZE and skb->len is at most that, so skb->len is the real limit, but none of these in band offsets were checked against it. The table chain is also followed with no forward progress check. The loop takes the next table from adth->next_table_index and stops only when that reaches zero. A modem can stage two tables that point at each other, so the loop never ends. It runs in softirq and clones the skb on every pass. Validate every device offset and length against skb->len before use. The block header must fit. Each table header, on entry and after every next_table_index, must lie inside the skb. The datagram table must fit. Each datagram index and length must stay inside the skb. The header padding must not exceed the datagram length so the receive length does not wrap. Require each next_table_index to move forward so the chain cannot cycle. This was reproduced under KASAN as a slab out of bounds read on a normal downlink receive once the iosm net device is up. | ||||
| CVE-2026-49282 | 1 Capstone-engine | 1 Capstone | 2026-08-17 | 5.1 Medium |
| Capstone is a disassembly framework. Prior to version 6.0.0-Alpha9, Capstone's public `cs_insn_name()` API forwards caller-supplied instruction IDs directly to the selected architecture backend. Most backends validate the ID before indexing instruction-name tables, but the M68K and RISCV backends have missing or incomplete bounds checks. On a Capstone handle opened for M68K or RISCV, a caller-controlled invalid instruction ID can trigger an out-of-bounds read and crash the process. The demonstrated impact is availability loss in applications or bindings that expose instruction-name lookup to untrusted IDs. No code execution or data disclosure was demonstrated. Version 6.0.0-Alpha9 patches the issue. | ||||
| CVE-2026-12630 | 1 Zephyrproject | 1 Zephyr | 2026-08-17 | 4.3 Medium |
| Zephyr's 6LoWPAN IP Header Compression (IPHC) uncompression code contains an out-of-bounds read in get_ihpc_inlined_size() (subsys/net/ip/6lo.c). The destination inline size is looked up in da_inline_size_table, which has 13 entries, using an index built from the M, DAC and DAM bits of the received IPHC dispatch word (iphc & NET_6LO_IPHC_DA_MASK, a 4-bit value of 0-15). The reserved combinations 13, 14 and 15 are not bounds-checked and read past the end of the table. The iphc word is taken directly from the received frame, and get_ihpc_inlined_size() is reached on every inbound 6LoWPAN frame via net_6lo_uncompress() from the 802.15.4 receive path (subsys/net/l2/ieee802154/ieee802154_6lo.c and ieee802154_6lo_fragment.c). An unauthenticated attacker on the radio/adjacent link can therefore craft a frame whose destination addressing-mode nibble selects an out-of-range index, with no privileges or user interaction. The out-of-bounds value becomes the computed inline_size, which then drives header reconstruction before the buffer-length check: it is used to dereference *(pkt->buffer->data + sizeof(iphc) + inline_size) and to compute a size_t diff that can underflow, leading to a further out-of-bounds read of the packet buffer and malformed uncompression. The practical impact is a radio-triggerable out-of-bounds read / denial-of-service on the receiver; the leaked byte is not returned to the attacker. The fix rejects any destination index beyond the table, aborting processing of the malformed frame. | ||||
| CVE-2026-72250 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_reasm: guard mac_header adjustment after IPv6 defrag nf_ct_frag6_reasm() slides the packet head forward to drop the IPv6 fragment header and then unconditionally advances skb->mac_header: skb->mac_header += sizeof(struct frag_hdr); On the NF_INET_LOCAL_OUT defrag path the skb has no link-layer header yet, so skb->mac_header is still the "not set" sentinel (u16)~0U. Adding sizeof(struct frag_hdr) wraps it to a small value (0xffff + 8 == 7), after which skb_mac_header_was_set() wrongly reports a MAC header is present and skb_mac_header() points into the headroom. The reassembler has done this unconditional add since it was introduced; it was harmless while mac_header was a bare pointer, but wrong once mac_header became a u16 offset whose unset state is the ~0U sentinel tested by skb_mac_header_was_set(). The sibling net/ipv6/reassembly.c does the same relocation and does guard the adjustment; mirror the guard here. | ||||
| CVE-2026-72408 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: geneve: gate GRO hint in geneve_gro_complete() on gs->gro_hint geneve_gro_receive() reads the GRO hint through geneve_sk_gro_hint_off(), which honours it only when the socket enabled IFLA_GENEVE_GRO_HINT (gs->gro_hint). geneve_gro_complete() instead calls the low-level geneve_opt_gro_hint_off() and acts on the hint unconditionally. On a tunnel without the hint, receive aggregates the frames as plain ETH_P_TEB while complete still honours an attacker-supplied hint option: it inflates gh_len by gro_hint->nested_hdr_len (u8) and redirects the dispatch type, so the inner gro_complete handler runs at nhoff + gh_len, an offset receive never pulled nor validated, reading out of bounds of the skb head: BUG: KASAN: slab-out-of-bounds in ipv6_gro_complete (net/ipv6/ip6_offload.c:196) Read of size 1 at addr ffff88800fe91980 by task exploit/153 ipv6_gro_complete (net/ipv6/ip6_offload.c:196) geneve_gro_complete (drivers/net/geneve.c:965) udp_gro_complete (net/ipv4/udp_offload.c:940) inet_gro_complete (net/ipv4/af_inet.c:1621) __gro_flush (net/core/gro.c:306) Gate the complete path on gs->gro_hint too via geneve_sk_gro_hint_off(), so both paths agree. Tunnels that enable the hint are unaffected. | ||||
| CVE-2026-72415 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SDCA: Validate written enum value in ge_put_enum_double() ge_put_enum_double() passes the user-supplied enumeration index item[0] to snd_soc_enum_item_to_val() without checking it against the number of items in the enum: ret = snd_soc_enum_item_to_val(e, item[0]); snd_soc_enum_item_to_val() indexes the heap-allocated e->values[] array with that index (e->values is set from a devm_kcalloc() of e->items entries), so a control write with an out-of-range item[0] reads past the end of the values buffer. The bounds check in snd_soc_dapm_put_enum_double() only runs afterwards, so it does not prevent the read here. Reject an out-of-range item before using it, matching the other enum put handlers. This issue was pointed out by the Sashiko AI review bot while reviewing a related enum-validation series: https://lore.kernel.org/all/20260609125735.CEB651F00893@smtp.kernel.org/ | ||||
| CVE-2026-74238 | 2026-08-17 | 7.5 High | ||
| TIER IV Nebula through 1.2.0 contains an out-of-bounds read vulnerability in the Vlp32Decoder::unpack() function that allows unauthenticated remote attackers to cause the decoder to read past the end of a received UDP buffer into adjacent heap memory by sending a short UDP datagram. Attackers can send a malformed datagram to the Velodyne UDP sensor port, which lacks sender-address restrictions present in other drivers, causing fabricated points derived from heap memory contents to be silently published into downstream PointCloud2 messages consumed by Autoware nodes. | ||||
| CVE-2026-72399 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: enetc: check the number of BDs needed for xdp_frame The size of xdp_redirect_arr array is ENETC_MAX_SKB_FRAGS. However, the number of fragments contained in xdp_frame may be greater than or equal to ENETC_MAX_SKB_FRAGS, which will cause the access to xdp_redirect_arr to be out of bounds. | ||||
| CVE-2026-71980 | 2026-08-17 | 7.5 High | ||
| Belledonne Communications bcg729 through 1.1.2 contains an out-of-bounds read vulnerability in the decodeSIDframe() function in src/cng.c that allows unauthenticated network-adjacent attackers to trigger a heap read beyond buffer boundaries by sending a zero-length comfort-noise RTP payload. A zero-length payload causes an integer underflow in the uint8_t filter order calculation, which wraps to 255 and is clamped to 10, causing the function to unconditionally read 11 bytes from a zero-byte buffer, resulting in media process termination or silent consumption of adjacent heap memory as reflection coefficients. | ||||
| CVE-2026-10673 | 1 Zephyrproject | 1 Zephyr | 2026-08-17 | 8.3 High |
| The Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L Ethernet driver (drivers/ethernet/eth_adin2111.c) reassembles received Ethernet frames in OPEN Alliance (OA) SPI mode by copying device-supplied 64-byte data chunks into a fixed static buffer ctx->buf of size CONFIG_ETH_ADIN2111_BUFFER_SIZE (default 1524 bytes). In eth_adin2111_oa_data_read(), each valid chunk was memcpy'd into ctx->buf[ctx->scur] and the write cursor scur advanced, with no check that scur + len stayed within the buffer. The number of chunks (up to 255, from the BUFSTS RCA field) and the per-chunk length are taken entirely from the frame data received off the wire; the cursor is only reset on a start-of-frame chunk. An attacker on the single-pair Ethernet segment can therefore send a frame whose reassembled size exceeds the configured buffer, causing the driver's RX offload thread to write attacker-controlled frame bytes past the end of the static buffer into adjacent driver/kernel memory (up to roughly 14.8 KB in the worst case). This is a remotely/adjacently reachable out-of-bounds write (CWE-787) that can corrupt memory and cause denial of service or potentially code execution. The defect was introduced when OA SPI support was added (commit 0ca8b0756b1) and shipped in releases v3.7.0 through v4.4.0. The fix adds a bounds check that drops the oversized frame and resets the cursor before the copy. | ||||
| CVE-2026-72318 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: cifs: validate DFS referral string offsets parse_dfs_referrals() validates that the response header and referral array fit in the received buffer, but each referral also contains string offsets supplied by the server. Those offsets are used to compute the DfsPath and NetworkAddress string pointers without checking whether they still point inside the response buffer. A malformed referral can therefore make the computed pointer exceed the end of the buffer. The resulting negative max_len is then passed to cifs_strndup_from_utf16(), and the non-Unicode path forwards it to kstrndup() as a size_t, allowing strnlen() to read out of bounds. Validate each string offset before deriving the string pointer. | ||||
| CVE-2026-16853 | 1 Ibm | 1 I | 2026-08-17 | 6.5 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to obtain sensitive information due to an out-of-bounds read. | ||||