Export limit exceeded: 25262 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25262 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98057 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Add checking nr_subbufs to persistent ring buffer validation Sashiko reported that the code was using meta->nr_subbufs without making sure that it matched the nr_pages + 1 on data that was assuming the two were the same. Add a check to the persistent ring buffer validation code to make sure that the saved nr_subbufs matches what we expect. | ||||
| CVE-2026-98061 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject tail calls directly from callback frames A tail call from a non-zero frame is modeled as a return from that frame. The verifier makes R0 unknown and calls prepare_func_exit() for the taken branch. When the current frame is a synchronous callback, prepare_func_exit() enforces the callback return-value contract and marks R0 precise. Since the tail-call path synthesized R0 rather than deriving it from an instruction, precision backtracking reaches the callback-calling instruction with R0 still requested and triggers the "callback unexpected regs" verifier bug. A CAP_BPF task can therefore cause a WARN and an -EFAULT BPF_PROG_LOAD. Tail calls reachable from callbacks are already rejected later by check_max_stack_depth(). Reject a tail call made directly by a callback before constructing the inconsistent return state, using the existing diagnostic. Tail calls from ordinary subprograms keep their current behavior. | ||||
| CVE-2026-98141 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: propagate reparse index insertion failure update_reparse_data() ignores the return value of set_reparse_index(). When index insertion fails, the code removes the just-written reparse data as cleanup but still returns 0, so symlink(2) (and WSL special file creation) reports success while no reparse data exists on disk. When there was no previous reparse data (oldsize == 0), the failure was likewise silently ignored. Propagate the error to the caller. | ||||
| CVE-2026-98143 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Don't read the U65 rounding mode as a storage mode Bits 15:14 of NPU_SET_{IFM,OFM}_PRECISION select the activation storage mode on U85 only. On U65 the same field holds the rounding mode, and the command stream parser has read it as a storage mode since the driver was added. That went unnoticed while unknown values fell through the switch, but now that they are rejected, every U65 command stream that asks for natural rounding (2) fails CMDSTREAM_BO_CREATE with -EINVAL. Mesa emits it for average pooling, concatenation, split, unpack, strided slice, LUT and argmax, which is 72 failures of the Teflon test suite on an i.MX93. Truncating rounding (1) is misread as well: it picks the two-tile address path and computes a bogus feature map size from tile bases the command stream never set. Read the field as a storage mode only on the hardware where it is one. | ||||
| CVE-2026-98151 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix REG INVARIANTS VIOLATION on speculative pointer arithmetic Take the following unprivileged program as an example: r0 = bpf_map_lookup_elem(...) /* PTR_TO_MAP_VALUE, offset 0 */ ... 14: r0 += r1 /* r1 is a bounded scalar */ 15: r9 = r0 Loading it triggers a verifier warning from reg_bounds_sanity_check(): verifier bug: REG INVARIANTS VIOLATION (alu): const subreg tnum out of sync with range bounds r64={.base=0x0, .size=0x0} r32={.base=0x0, .size=0xffffffff} var_off=(0x0, 0x0) What happens: 1. Processing insn 14 (r0 += r1) in adjust_ptr_min_max_vals(), the new offset is computed into dst_reg's var_off and 32/64-bit ranges. 2. Because pointer registers do not track 32-bit subregister bounds, __mark_reg32_unbounded() first sets r32 to the full range; r32 is re-derived from the offset at the end of the function by reg_bounds_sync(). 3. On the unprivileged path, sanitize_ptr_alu() is called and, via sanitize_speculative_path() -> push_stack(), snapshots the current register state and schedules the next instruction (insn 15) to be verified directly as a speculative path. 4. That snapshot is taken between step 2 and the final reg_bounds_sync(): at this point dst_reg's var_off still holds the (const) original offset while r32 has just been blanked to the full range, i.e. the two are out of sync. When the speculative path later verifies insn 15 (r9 = r0), the inconsistent state reaches reg_bounds_sanity_check() and trips the warning. var_off and the 32-bit range must always be consistent. There are two ways to keep the snapshot consistent: 1. sync var_off and r32 before the snapshot so they match, or 2. leave r32 at its original (already consistent) value and blank it only after the snapshot. The whole point of sanitize_ptr_alu() is to insert a harmless masking sequence that keeps the access in bounds under speculation, so the state it snapshots should faithfully represent that. Take approach 2: move __mark_reg32_unbounded() to after sanitize_ptr_alu(), so the speculative snapshot keeps the pointer's original, consistent r32. The non-speculative path is unchanged: r32 is still blanked before the offset is applied and re-derived by reg_bounds_sync(). | ||||
| CVE-2026-98145 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: reject a command chain that carries no commands A chain whose command_count is zero passes the payload length check, because struct_size(payload, data, 0) is just the header. The fill loop then does not run, so offset stays zero and the request is submitted with a zero-length buffer. On firmware without AIE2_NPU_COMMAND that ends at the opcode check, since op is still ERT_INVALID_CMD and aie2_get_chain_msg_op() answers MSG_OP_MAX_OPCODE. aie2_get_npu_chain_msg_op() answers MSG_OP_CHAIN_EXEC_NPU whatever it is given, so there the submission continues to drm_clflush_virt_range(cmd_buf, 0), which reads the byte before the buffer and faults on the vmap guard page. EXEC_CMD is reachable by any process that can open the render node. Reject the request instead. | ||||
| CVE-2026-98107 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix out-of-bounds write in l2cap_ecred_connect l2cap_chan_connect() tries to ensure there are no more than L2CAP_ECRED_CONN_SCID_MAX pending ECRED channels, so they fit in the same L2CAP_ECRED_CONN_REQ that l2cap_ecred_connect() constructs. However, the check only counts deferred channels. If 6 L2CAP sockets are connected at the same time in order DDDDND (D=deferred, N=non-deferred), the last can bump the total to max+1. It results to one __le16 written out of bounds of the scid array, and an invalid ECRED_CONN_REQ being sent. Fix by leaving room for the non-deferred pending ECRED channels in the counting in l2cap_chan_connect(), so the limit can't be exceeded. Move counting under same critical section where the channel is added. Although race conditions involving this appear unreachable, it's easier to see. Also add WARN_ON_ONCE check in l2cap_ecred_defer_connect() to make this less brittle. | ||||
| CVE-2026-98156 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: use the DMA API for resource backing on Xen On a Xen PV domain page addresses bear no relation to the real machine addresses the host would have to use to reach it. virtio_ring.c handles this correctly, vring_use_map_api() returns true for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM. virtio-gpu makes the same decision independently, but its copy looks only at the feature bit: bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev); QEMU does not set iommu_platform on virtio-vga by default, so VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api is false, and virtio_gpu_object_shmem_init() describes the framebuffer's backing pages to the host with sg_phys(). Those are guest-physical addresses. In a PV domain they resolve, on the host side, to pages belonging to some other domain, so the host scans out unrelated memory. Move the decision into virtio_gpu_use_dma_api() and give it the xen_domain() check, like vring_use_map_api() has. This additionally enables the dma_sync_sgtable_for_device() calls in virtgpu_vq.c, which are required for correctness whenever swiotlb is in play. Reproduced with a Xen 4.21 PV dom0 nested inside QEMU 8.2 with virtio-vga, on both a distro 6.8 kernel and 6.18 LTS. A PVH dom0 works fine and doesn't need this fix because it is identity-mapped, only PV dom0s are affected. | ||||
| CVE-2026-98112 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix listener task lifetime on netdev events The listener thread exits when its listening socket is shutdown. The netdevice notifier shuts down the socket before calling kthread_stop(), so the task_struct can be freed before kthread_stop() gets its reference. Create the listener in a stopped state and hold an extra task_struct reference until kthread_stop_put() completes. Also stop and release listeners before freeing their interface records during TCP teardown. | ||||
| CVE-2026-98114 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: propagate DACL parsing errors parse_dacl() silently accepts truncated ACEs and allocation failures, allowing set_info_sec() to continue with an incomplete ACL conversion. Return parsing and allocation errors to parse_sec_desc() so malformed security descriptors are rejected before inode attributes or ACL xattrs are updated. | ||||
| CVE-2026-98117 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: Fix potential UAF/KASAN warning Currently, trace_cachefiles_coherency() is being passed a pointer to a __be64 lain over the coherency data in struct cachefiles_xattr so that it can display the first 8 bytes. However, the data is of variable length and could even be 0 bytes. This could lead to a UAF or KASAN warning. Fix this by making sure the buffer has room for at least 8 bytes and that those 8 bytes are pre-cleared. Further, those bytes are not 8-byte aligned, so fix the tracepoint to extract the data as four 2-byte words (they are 2-byte aligned) and reassemble the __be64. The compiler will convert this into a single 8-byte load where the CPU supports it. | ||||
| CVE-2026-98131 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix dma mapping leak in stmmac_tso_xmit() In stmmac_tso_xmit(), if the DMA mapping of an skb fragment fails, the frame is dropped but the DMA mappings already created for the linear part and for the fragments mapped before the failure are never unmapped, leaking DMA mappings. Fix the leak by walking back over the descriptors used by the frame and releasing each of them with stmmac_free_tx_buffer(). Moreover, release the descriptors with stmmac_release_tx_desc() unmapping the DMA buffers. | ||||
| CVE-2026-98160 | 1 Linux | 1 Linux Kernel | 2026-09-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix mismatched free of HalData in rtw_sdio_if1_init() padapter->HalData is allocated via vzalloc(), but incorrectly freed using kfree() in the rtw_sdio_if1_init() error path. Using kfree() to release this vmalloc-backed buffer can lead to memory corruption. Use rtw_hal_data_deinit() to pair the free correctly and free HalData with vfree(). The bug was first flagged by an experimental static analysis tool we are developing for kernel memory-management bugs. Manual inspection confirms that the issue is still present in current mainline. An x86_64 allyesconfig build showed no new warnings. As we do not have suitable RTL8723BS SDIO hardware to test with, no runtime testing was able to be performed. | ||||
| CVE-2026-98029 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: eth: nfp: bound the ntuple rule dump by the caller's buffer size nfp_net_get_fs_loc() dumps every entry of nn->fs.list into rule_locs[] without consulting cmd->rule_cnt, which is how many entries the caller had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the buffer from the rule_cnt userspace passes in, so once an admin has installed flow steering rules any user can ask for fewer slots than there are rules and run off the end of the allocation. A rule_cnt of 0 leaves the buffer pointer NULL and the walk dereferences it. Bail out with -EMSGSIZE when the buffer fills up, the way the other ntuple capable drivers do, and report how many locations were filled so a shrinking rule list does not leave the caller reading stale slots. | ||||
| CVE-2026-98037 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject untrusted allocated-object pointers When the final RCU read-side critical section ends, a local kptr is demoted to PTR_UNTRUSTED but retains MEM_ALLOC. The pointer may be NULL or may refer to an object whose lifetime is no longer protected. type_is_ptr_alloc_obj() nevertheless recognizes any PTR_TO_BTF_ID with MEM_ALLOC as a live allocated object. In particular, a refcount-only local kptr never carries NON_OWN_REF, so it still passes the bpf_refcount_acquire() argument check after RCU protection ends. The kfunc can then dereference NULL or stale memory. Make type_is_ptr_alloc_obj() reject PTR_UNTRUSTED pointers. Since type_is_non_owning_ref() is based on the same predicate, graph kfunc arguments obey the same live-object requirement. Fault-protected reads of the demoted pointer remain valid: writes are already rejected, and read fixups use bpf_may_fault_on_deref() rather than this predicate. [ kkd: Rewrote commit log ] | ||||
| CVE-2026-98039 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Require MEM_PERCPU for percpu kptr stores map_kptr_match_type() treats perm_flags as the set of register type flags that a kptr field permits. Adding MEM_PERCPU to that set for BPF_KPTR_PERCPU does not require the source register to carry it, however. The subset test consequently accepts both a plain bpf_obj_new() allocation and a referenced kernel pointer into a __percpu_kptr map field. Loads from the field are always marked MEM_PERCPU. Consumers then treat the stored value as the cookie returned by bpf_percpu_obj_new(): per-CPU pointer helpers relocate it, and map teardown selects the per-CPU free path. A plain allocation can therefore provide an arbitrary kernel read/write, while a kernel pointer can be relocated into an invalid address or sent through a missing destructor. Require the source MEM_PERCPU flag to match the destination field kind. This preserves valid bpf_percpu_obj_new() stores and rejects both the program-BTF and kernel-BTF variants. | ||||
| CVE-2026-98040 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark the zero register precise for a register-form NULL check check_cond_jmp_op() accepts "if rA <op> rB" as a NULL check for a nullable pointer rA when rB is a scalar known to be zero, lifts PTR_MAYBE_NULL from rA in the corresponding branch and does not mark rB precise. Consider the following program: r0 = bpf_get_prandom_u32(); r6 = 1; /* the r6 == 0 path is explored first */ if (r0 == 0) goto 1f; r6 = 0; 1: r0 = bpf_map_lookup_elem(map, &0); /* absent, NULL at runtime */ if (r0 == r6) goto 2f; /* taken as a NULL check for r0 */ *(u8 *)(r0 + 0); /* verifier: map value; runtime: zero */ 2: return 0; The r6 == 0 path is explored first and the dereference is accepted. The r6 == 1 path is pruned at the checkpoint recorded for (1), so the comparison is never verified with a non-zero r6. At runtime a failed lookup returns NULL, NULL != 1 takes the non-NULL edge and the program dereferences a pointer that is zero. | ||||
| CVE-2026-98042 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Don't resurrect a scalar id dropped by collect_linked_regs() check_cond_jmp_op() copies the compared registers into env->{false,true}_reg{1,2} before collect_linked_regs() runs and copies those snapshots back into both branch states afterwards. collect_linked_regs() records at most LINKED_REGS_MAX members of a linked registers group in the jump history and calls clear_scalar_id() for every member that does not fit. The compared register is not exempt from that. As a consequence, sync_linked_regs() might adjust ranges for more registers than bpf_bt_sync_linked_regs() can propagate precision to. Collect the linked registers before the snapshots are taken instead. This might lead to some unnecessary clear_scalar_id's, but from previous testing situations with many linked registers are extremely rare. | ||||
| CVE-2026-98043 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Don't infer non-NULL from a pointer with an unbounded offset reg_not_null() decides that a register holds a non-NULL value by looking at its type alone. For pointer types that allow arithmetic the type only guarantees a non-NULL base, in case of an unbound offset the runtime offset value might still add up to NULL. Consider the followng program: r6 = bpf_map_lookup_elem(map, &0); /* present */ if (r6 == 0) return 0; r7 = bpf_map_lookup_elem(map, &1); /* absent, NULL at runtime */ r8 = r7; r8 -= r6; /* pointer - pointer: unknown scalar, -r6 */ r8 <<= 1; r8 >>= 1; /* any non-negative offset is accepted by */ /* check_reg_sane_offset_ptr() */ r6 += r8; /* verifier: map value; runtime: zero */ if (r7 != r6) return 0; *(u8 *)(r7 + 0); /* r7 is inferred non-NULL, both are zero */ At runtime both registers are zero, the comparison is true and the load faults with NULL pointer dereference. Require the offset to be within +-BPF_MAX_VAR_OFF in reg_not_null(). | ||||
| CVE-2026-98058 | 1 Linux | 1 Linux Kernel | 2026-09-29 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark syscall helpers as sleepable bpf_sys_bpf() executes the bpf(2) syscall body, which can take mutexes, allocate with GFP_KERNEL, and wait for an RCU grace period. bpf_sys_close() reaches close_fd() and filp_close(), which can sleep as well. Both helpers are limited to BPF_PROG_TYPE_SYSCALL, whose main program is sleepable. That does not make every callback sleepable: a syscall program can register a bpf_timer callback, and the verifier checks that callback in a non-sleepable context while retaining the syscall helper set. Without .might_sleep on the prototypes, such a callback can invoke bpf_sys_bpf() from hrtimer softirq context and trigger a scheduling-while-atomic failure. bpf_sys_close() is exposed through the same missing context check. Set .might_sleep on both prototypes so the existing helper-context check rejects them from timer callbacks and other atomic regions. Calls from the sleepable main body remain valid. | ||||