Export limit exceeded: 48515 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (48515 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72484 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: most: video: avoid double free on video register failure comp_register_videodev() allocates a video_device with video_device_alloc() and releases it if video_register_device() fails. This can double free the video_device when __video_register_device() reaches device_register() and that call fails: video_register_device() -> __video_register_device() -> device_register() fails -> put_device(&vdev->dev) -> v4l2_device_release() -> vdev->release(vdev) -> video_device_release(vdev) comp_register_videodev() -> video_device_release(mdev->vdev) Use video_device_release_empty() while registering the device so that registration failure paths do not free mdev->vdev through vdev->release(). comp_register_videodev() then releases mdev->vdev exactly once on failure. Restore video_device_release() after successful registration so the registered device keeps its normal lifetime handling. This issue was found by a static analysis tool I am developing. | ||||
| CVE-2026-72475 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: dma-axi-dmac: Properly free struct axi_dmac_desc Use axi_dmac_free_desc() to free fully the descriptor at fail path when call axi_dmac_alloc_desc() in axi_dmac_prep_peripheral_dma_vec(). | ||||
| CVE-2026-72428 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stack slot index in nospec checks check_stack_write_fixed_off() computes the byte slot for a fixed-offset stack write as -off - 1, and records each written byte in slot_type[] with (slot - i) % BPF_REG_SIZE. The Spectre v4 sanitization pre-check uses slot_type[i] instead. For a 4-byte write at fp-8 after the lower half of fp-8 has been zeroed, the pre-check scans bytes 0..3 and sees STACK_ZERO while the actual write updates bytes 7..4. That can leave the second half-slot write without nospec_result even though the bytes being overwritten still require sanitization. Use the same slot index in the sanitization pre-check that the write path uses when updating slot_type[]. | ||||
| CVE-2026-72396 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: adm1275: Prevent reading uninitialized stack While adding support for the ROHM BD127X0 hot-swap controllers, sashiko reported an error in device-name comparison, which can lead to reading uninitialized stack memory. Quoting Sashiko: This is a pre-existing issue, but I noticed that just before this block in adm1275_probe(), there might be an out-of-bounds stack read: ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer); if (ret < 0) { ... } for (mid = adm1275_id; mid->name[0]; mid++) { if (!strncasecmp(mid->name, block_buffer, strlen(mid->name))) break; } Since i2c_smbus_read_block_data() reads up to 32 bytes into the uninitialized stack array block_buffer without appending a null terminator, strncasecmp() could read past the valid bytes returned in ret. For example, if the device returns a shorter string like "adm12", checking it against "adm1275" up to the length of "adm1275" will continue reading into uninitialized stack bounds. Prevent reading uninitialized memory by zeroing the stack array. | ||||
| CVE-2026-72349 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_rateest: fix u64 truncation in xt_rateest_mt() On links faster than ~34 Gbps, where byte rate may exceed 2^32-1 (~ 4.3 GBps), the comparison result becomes incorrect because the truncated value no longer reflects the actual estimator rate. Fix by changing the local variables to u64. | ||||
| CVE-2026-72326 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cake: reject overhead values that underflow length CAKE accepts signed overhead values and stores them in an s16, but the adjusted packet length calculation uses unsigned arithmetic. A negative effective length can therefore wrap to a large value. Such configurations make rate accounting depend on integer wraparound rather than on the packet size userspace intended to model. A static netlink lower bound is not enough because packets reaching CAKE can be smaller than any reasonable manual-overhead allowance. Fold the signed overhead adjustment into the existing datapath MPU clamp so negative adjusted lengths are clamped before link-layer framing adjustments. | ||||
| CVE-2026-72292 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Initialize KVM_S390_GET_CMMA_BITS memory kvm_s390_get_cmma_bits() allocates its output buffer with vmalloc(), which does not zero the returned pages: values = vmalloc(args->count); In the non-peek (migration) path, dat_get_cmma() reports a byte count spanning from the first to the last dirty page, but __dat_get_cmma_pte() writes values[gfn - start] only for pages whose CMMA dirty bit is set. The walk uses DAT_WALK_IGN_HOLES, so clean and unmapped pages that lie between two dirty pages within the reported span are visited but never store their byte. Those gaps (up to KVM_S390_MAX_BIT_DISTANCE pages each) stay uninitialized yet fall inside [0, count) and are copied out by copy_to_user(), disclosing stale kernel memory to user space. Before the switch to the new gmap implementation the buffer was fully populated for every gfn in the span, so no uninitialized bytes were exposed; the dirty-only walk introduced the leak. Use vzalloc() so the gaps read back as zero. | ||||
| CVE-2026-72236 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/perf_cpum_cf: Add missing array_index_nospec() to __hw_perf_event_init() ev variable is userspace controlled via event->attr.config and used as an array index after bounds checking, but without speculation barriers. Add the missing array_index_nospec() call to prevent speculative execution. | ||||
| CVE-2026-72169 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kho: make sure scratch size is always aligned by CMA_MIN_ALIGNMENT_BYTES When using scratch_scale, the scratch sizes are rounded up to CMA_MIN_ALIGNMENT_BYTES since they will be released as MIGRATE_CMA. This is not done when using fixed scratch sizes via command line. This can result in user specifying a size which is not aligned, and thus kernel releasing a pageblock that is only partially scratch. Do the rounding up for both cases in scratch_size_update(). | ||||
| CVE-2026-72074 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix type confusion in CDC union descriptor parsing The driver currently trusts the bMasterInterface0 from the CDC union descriptor without verifying that it matches the interface being probed. This could lead to the driver overwriting the private data of another interface. Validate that the control interface found in the descriptor is indeed the one we are probing. | ||||
| CVE-2026-72068 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: Use u64 multiplication in update_rlimit_cpu() update_rlimit_cpu() converts the RLIMIT_CPU value to nanoseconds with u64 nsecs = rlim_new * NSEC_PER_SEC; On 32-bit kernels both rlim_new (unsigned long) and NSEC_PER_SEC (1000000000L) are 32-bit, so the multiplication is performed in unsigned long and truncated for rlim_new > 4 seconds before being widened to u64. The same file already casts to u64 for the matching computation in check_process_timers(): u64 softns = (u64)soft * NSEC_PER_SEC; As a result, the truncated value is installed into the CPUCLOCK_PROF expiry cache (nextevt), causing the process CPU timer to be programmed to fire prematurely for any RLIMIT_CPU soft limit >= 5 seconds. The actual SIGXCPU/SIGKILL decision in check_process_timers() already casts to u64 and is therefore correct, so limit enforcement is not broken; only the expiry-cache programming is wrong. Apply the same cast here so both paths convert rlim_cur identically. 64-bit kernels are unaffected. | ||||
| CVE-2026-72044 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-72015 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/resctrl: Fix double-add of pseudo-locked region's RMID to free list A pseudo-locked group's RMID is freed when it is created. On unmount rmdir_all_sub() unconditionally frees all RMID of all groups, resulting in a double-free of the pseudo-locked group's RMID. The consequence of this is that the original free results in the pseudo-locked group's RMID being added to the rmid_free_lru linked list and the second free then attempts to add the same RMID entry to the rmid_free_lru again. Do not double-free a pseudo-locked group's RMID. | ||||
| CVE-2026-19959 | 1 Edimax | 1 Ew-7478apc | 2026-08-16 | 9.9 Critical |
| A weakness has been identified in Edimax EW-7478APC 1.04. This affects the function formWanTcpipSetup of the file /goform/formWanTcpipSetup. This manipulation of the argument pppUserName causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-73055 | 2 Ericcornelissen, Shescape Project | 2 Shescape, Shescape | 2026-08-16 | 4.8 Medium |
| Shescape before 2.1.15 (and 3.0.0 before 3.0.2) fails to properly escape tilde (~) characters in assignment contexts on Unix systems where the shell is explicitly configured to "sh" or true and /bin/sh points to BusyBox. Using the escape and escapeAll APIs with untrusted input in an assignment prefixed to a command, an attacker can inject a tilde payload to disclose the user's home directory location and, depending on usage, alter the location on which a command operates. | ||||
| CVE-2026-19933 | 1 Defaultfuction | 1 Customer-relationship-management-in-c-project | 2026-08-16 | 6.3 Medium |
| A weakness has been identified in DefaultFuction Customer-Relationship-Management-In-C-Project 2.0. Impacted is the function gets of the component Customer Search Module. This manipulation causes stack-based buffer overflow. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. The project confirms, that "it’s being processed". | ||||
| CVE-2022-4993 | 1 Gshank | 1 Html::formhandler | 2026-08-15 | 9.1 Critical |
| HTML::FormHandler versions through 0.40068 for Perl allow attacker selected method dispatch and resource exhaustion because _apply_actions and add_error use error message text built from request data as a Locale::Maketext bracket notation template. add_error hands its first argument to the language handle as the Locale::Maketext message key, and the default handle's lexicon sets `_AUTO`, so a string that is not a lexicon entry is compiled as a bracket notation template instead of being looked up. In a bracket group the first token names a method called on the language handle and the remaining tokens are its arguments. Three kinds of text the library did not author reach that position. _apply_actions installs a `$SIG{__WARN__}` handler that stores the warning text in `$error_message`, and a captured warning survives a successful action, so a field carrying a numeric transform turns `Argument "[sprintf,%50000000d,0]" isn't numeric` into the template; a warning quotes the submitted value verbatim, so the group is well formed and dispatches. `$error_message ||= $tobj->validate($new_value)` takes a type constraint's own failure message, which renders the rejected value through a partial dumper in bracket and comma form (Devel::PartialDump when Moose can load it, Type::Tiny's own dumper always), so a field with `apply => [ Str ]` given a parameter sent more than once, which arrives as an array, gets `Reference ["a","b"] did not pass type constraint "Str"` as its template, from a request that carries no bracket character of its own. A coercion or transform exception reaches it the same way. Beyond those, a validator whose message contains the field value puts that value in the template directly, and add_error replaces the message list with the contents of an arrayref first argument (`@message = @{$message[0]} if ref $message[0] eq 'ARRAY'`), so a value arriving as an array fills the argument slots from the same request as well. A malformed group such as `[0]` makes the compile croak, and HTML::FormHandler::I18N::maketext and add_error each re-raise that as a die, so process() throws. A well formed group naming sprintf reaches CORE::sprintf with an attacker chosen field width. Any caller that applies a type constraint or a transform to an untrusted field, or whose validator passes an untrusted field value to add_error, can be made to throw an unhandled exception out of process(), or to allocate an arbitrary amount of memory in one request, and an application whose language handle subclass defines side effecting public methods makes those callable with attacker chosen arguments. The dumped type constraint message is bounded to the exception, because both dumpers quote non-numeric elements so the method slot is never an attacker chosen name. The built-in messages pass fixed templates with the value in an argument slot, where it stays inert, and the built-in field types attach explicit message callbacks, so neither is affected. | ||||
| CVE-2026-73492 | 1 Flavorjones | 1 Loofah | 2026-08-14 | 3.7 Low |
| Loofah is a general library for manipulating and transforming HTML/XML documents and fragments, built on top of Nokogiri. From 2.25.0 until 2.25.2, Loofah::HTML5::Scrub.allowed_uri? does not reject javascript: or vbscript: URIs whose scheme is split by semicolon-less numeric character references such as :, 	, 
, or 
. CGI.unescapeHTML leaves these references encoded, so allowed_uri? reports the URL safe even though a browser decodes an encoded colon or strips encoded whitespace and executes the resulting URI scheme. This issue affects only callers that pass HTML-encoded strings directly to allowed_uri?; Loofah's default sanitize() path is not affected. This issue is fixed in version 2.25.2. | ||||
| CVE-2026-18728 | 1 Redhat | 2 Enterprise Linux, Open Iscsi | 2026-08-14 | 6.5 Medium |
| A flaw was found in open-iscsi. An integer underflow vulnerability in the `iscsiuio` component, specifically during IPv4 Dynamic Host Configuration Protocol (DHCP) parsing, allows a remote attacker on the same local network segment to cause a denial of service. By sending a specially crafted IPv4/UDP DHCP reply, the attacker can trigger an out-of-bounds read, leading to the `iscsiuio` process crashing. This issue affects systems where `iscsiuio` is actively handling IPv4 DHCP traffic. | ||||
| CVE-2026-66807 | 1 Microsoft | 8 365 Apps, Microsoft 365, Office 2019 and 5 more | 2026-08-14 | 7.8 High |
| Stack-based buffer overflow in Microsoft Office allows an unauthorized attacker to execute code locally. | ||||