Export limit exceeded: 395707 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395707 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90403 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: pci: fix error path in rtl_pci_probe() In the last error path in rtl_pci_probe(), the cleanup functions are skipped due to a wrong goto label. Moreover, the successful call to rtl_init_rfkill(), ieee80211_register_hw(), rtl_debug_add_one() have to be reverted. Fix this issue by updating the labels and adding the relevant cleanup functions to the last error path. | ||||
| CVE-2026-90407 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix overreads in ath11k_wmi_process_csa_switch_count_event() There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so the parse infrastructure does not enforce a minimum length for the event struct. Additionally, the num_vdevs field is taken directly from firmware and used as a loop bound over the vdev_ids array without checking that it fits within the TLV payload. Either condition can cause an out-of-bounds read. Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so the parse infrastructure enforces a minimum length for the fixed-size event struct. Add a helper ath11k_wmi_tlv_data_len() to recover the payload length of a parsed TLV from the header preceding its data pointer. Use it in ath11k_wmi_process_csa_switch_count_event() to bound num_vdevs before the loop. Compile tested only. | ||||
| CVE-2026-90414 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: IB/isert: reject PDUs declaring more data than was received isert_recv_done() hands each received PDU to the opcode handlers without ever looking at wc->byte_len, the number of bytes the HCA actually placed in the receive descriptor. The handlers then copy that many bytes - the data-segment length the initiator declared in the BHS (ntoh24(hdr->dlength), via the derived unsol_data_len / imm_data_len) - out of the fixed-size descriptor: isert_handle_iscsi_dataout(): sg_copy_from_buffer(sg_start, sg_nents, isert_get_data(rx_desc), unsol_data_len); isert_handle_scsi_cmd(): sg_copy_from_buffer(cmd->se_cmd.t_data_sg, sg_nents, isert_get_data(rx_desc), imm_data_len); Because the declared length is never checked against wc->byte_len, an initiator can declare a data segment larger than the bytes it actually sent (and larger than the descriptor) and cause an out-of-bounds read of the receive buffer. Nothing upstream of isert closes this door: - __iscsit_check_dataout_hdr() bounds the inbound payload against conn_ops->MaxXmitDataSegmentLength (MXDSL) - a transmit parameter, used here for the inbound check. - iscsi_set_connection_parameters() sets ops->MaxXmitDataSegmentLength = ops->TargetRecvDataSegmentLength; and TARGETRECVDATASEGMENTLENGTH is absent from the min()-clamp list in iscsi_check_acceptor_state(), so the value the initiator declares is adopted verbatim (type range 512..16777215). The initiator effectively raises its own ceiling. - isert never clamps the negotiated value to its own fixed receive descriptor (ISER_RX_SIZE, 9216 bytes), so the target core's bound and the descriptor size are unrelated. The imm_data_len == data_len path is more than an over-read: it aliases the receive descriptor via sg_set_buf() and passes it to the backend as the data source for the SCSI WRITE, so an over-declared length causes heap contents past the descriptor to be written through the backend to the backing store. The backend is the victim of the oversized scatterlist isert hands it, not the cause; no read-back of the written bytes was demonstrated. Trigger: after login completes (full feature phase), an initiator that has declared a large TargetRecvDataSegmentLength and a FirstBurstLength that permits unsolicited/immediate data sends a PDU whose declared data-segment length exceeds what was received. With KASAN: BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 Read of size 4096 at addr ffff888109720800 by task kworker/1:0H/25 Workqueue: ib-comp-wq ib_cq_poll_work Call Trace: sg_copy_buffer+0x150/0x1c0 isert_recv_done+0xba6/0x2390 __ib_process_cq+0xe1/0x390 ib_cq_poll_work+0x46/0x150 isert_recv_done+0xba6 resolves to isert_handle_iscsi_dataout() (ib_isert.c:1160), inlined through isert_rx_opcode(). Validate wc->byte_len against the framing in isert_recv_done() before the PDU reaches any handler, and reinstate the connection if it is short. Because the test compares without subtracting the header length, it also rejects PDUs shorter than the iSER and iSCSI headers, which would otherwise be parsed out of stale descriptor contents. The login handler rejects PDUs shorter than ISER_HEADERS_LEN (commit 29e7b925ae6d ("IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN")) but does not bound the declared length either; that is fixed in the next patch. The data handlers had no length check at all. isert reads the data segment from a fixed offset: isert_get_data() returns the iSER header plus ISER_HEADERS_LEN and makes no adjustment for an AHS. The bytes the handlers touch are therefore exactly [ISER_HEADERS_LEN, ISER_HEADERS_LEN + dlength), and comparing that sum against wc->byte_len bounds precisely the region that is read. An AHS term would only make the test stricter without bounding anything furth ---truncated--- | ||||
| CVE-2026-92488 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: complete object teardown when the destroy command fails erdma_destroy_qp(), erdma_destroy_cq(), erdma_dereg_mr(), and erdma_destroy_ah() returned early when erdma_post_cmd_wait() failed, leaking the queue buffers, MTTs, doorbells and the STAG, QPN, CQN and AHN identifiers. A command timeout clears ERDMA_CMDQ_STATE_OK_BIT and permanently disables the command queue, so no retry can succeed; the RDMA core keeps the object after a failed destructor and forced uverbs cleanup then nulls the pointers, making the resources unreachable. Warn on failure but release every software-owned resource and return success, since during terminal destruction the hardware command result is only diagnostic. | ||||
| CVE-2026-93039 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: meson: Keep link pointers valid on realloc failure meson_card_reallocate_links() grows the DAI link and private data arrays with two consecutive krealloc() calls and updates the owner pointers only after both calls have succeeded. A successful krealloc() may move the data: it frees the old block and returns a new one. When that happens for the link array and the second krealloc() then fails, card->dai_link still points to the block that krealloc() already freed, and the error path frees the new block too. The probe error path then calls meson_card_clean_references(), which dereferences card->dai_link and kfree()s it again, resulting in a use-after-free and a double free. Commit card->dai_link and card->num_links right after the first krealloc() succeeds, so the pointer always refers to a valid allocation that meson_card_clean_references() can walk and free. krealloc() with __GFP_ZERO zero-initializes the added entries, so walking them on the error path is safe. With both failure paths reduced to a plain return, drop the goto labels and the error message. | ||||
| CVE-2026-93042 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Terminate all descriptors without callbacks The DMA Engine client documentation says in the "Terminate APIs" section of Documentation/driver-api/dmaengine/client.rst: "No callback functions will be called for any incomplete transfers." dw-edma instead calls vchan_cookie_complete() when a deferred STOP reaches the interrupt handler. This schedules a callback for the active descriptor and leaves other issued or submitted descriptors queued. A late callback after dmaengine_terminate_sync() can dereference client state that has already been freed, while leftover descriptors may later restart into reused buffers or leak. Move all issued and submitted descriptors to the terminated list whenever termination completes. For a pending STOP, do this from both the DONE and ABORT paths. Complete their cookies in order without scheduling callbacks. A STOP can remain pending until the running transfer raises an interrupt. Make device_synchronize() wait for such a pending STOP to complete before releasing terminated descriptors. Reuse it from free_chan_resources(), then release the remaining virt-dma resources. Sleep instead of busy-polling while waiting, and warn if the existing timeout expires. | ||||
| CVE-2026-93070 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: ipu6: Do not free aux device pdata after init ipu6_bus_initialize_device() stores the isys/psys pdata pointer in struct ipu6_bus_device and initializes the auxiliary device. After that point, error unwinding must drop the auxiliary device reference and let ipu6_bus_release() free both the bus device and adev->pdata. The isys and psys init paths already call put_device() when MMU initialization fails, and ipu6_bus_add_device() calls auxiliary_device_uninit() on auxiliary_device_add() failure. Both paths therefore run the bus release callback. The extra kfree(pdata) in the callers can release the same object a second time. Remove the manual pdata frees after the auxiliary device has been initialized. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-93201 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm-pcache: validate seg_id fields from persistent memory cache_pos_decode(), cache_key_decode() and the last-kset branches of cache_replay(), the writeback worker and the GC worker take a cache segment id from the cache device metadata and index cache->segments[] with it without checking it against cache->n_segs. That metadata is only CRC-protected with a fixed public seed, so whoever supplies the cache device on a table load (CAP_SYS_ADMIN) controls the id; an out-of-range value forms a wild pcache_cache_segment pointer that is dereferenced and written through -- an out-of-bounds read and write driven by on-disk data. Add cache_seg_id_valid() and reject an out-of-range id at each decode site, failing the operation with -EIO instead of indexing past the array. Bound the id against the initialized-segment count (cache_info.n_segs) rather than the physical device total. A forged cache_info.n_segs below seg_num otherwise leaves segments[cache_info.n_segs..seg_num) as zeroed structs whose data pointer is NULL, so a forged id in that window would still be dereferenced. A later patch guarantees cache_info.n_segs <= seg_num, and a driver-created cache sets the two equal, so valid images are unaffected. | ||||
| CVE-2026-77239 | 1 Arnasdon | 1 Wacrm | 2026-09-19 | 8.1 High |
| WACRM is a self-hostable CRM template for WhatsApp. In version 0.7.0 and earlier, WACRM flow and automation write routes authenticate account viewers but do not enforce the agent role before using a service-role database client that bypasses row-level security. In src/app/api/flows/[id]/route.ts, src/app/api/flows/[id]/activate/route.ts, and src/app/api/flows/route.ts, a viewer can create, edit, activate, or delete flows because membership-only checks are followed by service-role writes. In src/app/api/automations/route.ts and src/app/api/automations/engine/route.ts, a viewer can create active automations and trigger outbound WhatsApp actions without the role required by the underlying write policies. This can permit unauthorized workflow changes, destructive flow deletion, and outbound actions from a role intended to be read-only. This vulnerability is fixed with commit 03e851bea56dcf6bb21ff1b80ba531372bf3269f. | ||||
| CVE-2026-84434 | 2 Gravityforms, Wordpress | 2 Gravity Forms, Wordpress | 2026-09-19 | 9.8 Critical |
| The Gravity Forms plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 3.1.0.4 via the upload_file function. This is due to a mismatch between the field validation pipeline and the file persistence pipeline, where hidden file upload fields bypass extension validation and a rejected file's intact upload state is later passed to upload_file() without re-validation. This makes it possible for unauthenticated attackers to upload files that may be executable, which makes remote code execution possible. Exploitation requires the targeted form to contain a File Upload field with its Visibility set to 'Hidden'; the vulnerability is reachable by unauthenticated attackers on any publicly accessible form meeting this condition. | ||||
| CVE-2026-89334 | 2 Wordplus, Wordpress | 2 Better Messages – Chat Rooms, Group Chat, Private Messages & Ai Chat Bots, Wordpress | 2026-09-19 | 6.5 Medium |
| The Better Messages – Chat Rooms, Group Chat, Private Messages & AI Chat Bots plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 2.15.33. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with custom-level access and above, to access the full message transcript, thread metadata, and user data of any chat-room thread without authentication. This is only exploitable when the chat room's only_joined_can_read setting retains its default value of '0'. | ||||
| CVE-2026-89274 | 2 Brechtvds, Wordpress | 2 Wp Recipe Maker, Wordpress | 2026-09-19 | 9.1 Critical |
| The WP Recipe Maker plugin for WordPress is vulnerable to Arbitrary Shortcode Execution in all versions up to, and including, 10.8.1. The vulnerability exists because `WPRM_Metadata::sanitize_metadata()` recursively calls `do_shortcode()` on every scalar field of the recipe's structured metadata array — including the `reviewBody` field, which is populated verbatim from the `comment_content` of approved `wprm-comment-rating` comments — without sanitizing or stripping shortcode tokens before execution; the subsequent `wp_strip_all_tags()` and `strip_shortcodes()` calls operate only on the output string after execution has already fully occurred, providing no protection against server-side shortcode invocation. This makes it possible for unauthenticated attackers to execute arbitrary registered WordPress shortcodes server-side on every recipe page render, causing shortcode output — such as attachment captions, private post fields, or other data exposed by installed shortcodes — to be embedded in the page's JSON-LD `reviewBody` metadata and disclosed to all visitors who load the recipe page. Successful exploitation requires the attacker's rated comment to pass the site's comment approval threshold, either via auto-approval or moderator action, before the injected shortcode begins executing on page loads. | ||||
| CVE-2026-90419 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: prevent out-of-bounds read in super root block parsing super-root inode metadata size is trusted before nilfs_read_inode_common(). Reject super-root inode sizes whose computed on-disk footprint exceeds the filesystem block size. This prevents malformed filesystem images from making nilfs_read_inode_common() read past the end of the super-root block. [ryusuke: clarify the commit title] | ||||
| CVE-2026-90423 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix UAF in ODP init error-handling path rxe_odp_mr_init_user() stores &umem_odp->umem in mr->umem before calling rxe_odp_init_pages(). If rxe_odp_init_pages() fails, rxe_odp_mr_init_user() releases umem_odp and returns an error. rxe_reg_user_mr() then unwinds the error through rxe_cleanup(), rxe_mr_cleanup(), ib_umem_release(mr->umem). There is an IS_ERR_OR_NULL(umem) check at the start of ib_umem_release(). But since mr->umem is NOT reset to NULL in the error handling path of rxe_odp_mr_init_user(), the check passes and it reads already-freed fields like umem->is_dmabuf, causing UAF. Fix the UAF by clearing mr->umem after releasing the failed ODP umem so the MR cleanup path does not release it again. | ||||
| CVE-2026-88824 | 2026-09-19 | 8.8 High | ||
| The Master Blocks WordPress plugin before 1.5.0 does not have authorisation on one of its REST routes, allowing unauthenticated users to update its settings, including a value that is output unescaped in the admin area, leading to Stored XSS that executes in the session of any administrator visiting a wp-admin page. | ||||
| CVE-2026-92420 | 2026-09-19 | 3.8 Low | ||
| The Hydra Booking — Appointment Scheduling & Booking Calendar WordPress plugin before 1.2.2 does not verify that a booking belongs to the requesting user before modifying or deleting it on two of its booking endpoints, allowing a booking-provider-level user to cancel and permanently delete other providers' bookings on the same site. | ||||
| CVE-2026-92421 | 2026-09-19 | 4.7 Medium | ||
| The Hydra Booking — Appointment Scheduling & Booking Calendar WordPress plugin before 1.2.3 does not verify that the host record being modified belongs to the user making the request, allowing authenticated users holding a Hydra Booking — Appointment Scheduling & Booking Calendar WordPress plugin before 1.2.3-assigned host role to modify other hosts' profile data and reassign ownership of another host's record to themselves. | ||||
| CVE-2026-94000 | 1 Redhat | 2 Build Keycloak, Red Hat Single Sign On | 2026-09-19 | 6.6 Medium |
| A flaw was found in the Admin REST API of Keycloak, an open-source identity and access management solution. The issue occurs in the group-membership endpoints where the system fails to check if a group grants administrative privileges before allowing a user to be added. This allows a delegated administrator with limited permissions to add themselves to a high-privilege group, potentially gaining full control over the entire realm. | ||||
| CVE-2026-94001 | 1 Redhat | 2 Build Keycloak, Red Hat Single Sign On | 2026-09-19 | 6.5 Medium |
| A flaw was found in the Admin REST API of Keycloak, an open-source identity and access management solution. The endpoint used for deleting user credentials does not correctly check for fine-grained reset-password permissions. This allows a delegated administrator, who should be restricted from resetting passwords, to delete a user's password credentials, resulting in the user being unable to log in. | ||||
| CVE-2026-93956 | 1 Olivier-ls | 1 Php-fts | 2026-09-19 | 3.5 Low |
| A flaw has been found in olivier-ls PHP-FTS up to 1.1.2. Affected by this issue is the function SearchEngine::buildHighlights of the file src/SearchEngine.php of the component Search Engine. Executing a manipulation of the argument Query can lead to cross site scripting. The attack may be launched remotely. The exploit has been published and may be used. Upgrading to version 1.1.3 can resolve this issue. This patch is called 0b2fae333d6b022da7ed4c43e2d41aa03f91dff3. The affected component should be upgraded. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. | ||||