Export limit exceeded: 22455 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22455 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74415 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: atcspi200: fix use-after-free when driver unbind DMA resource is initialized after SPI controller registration. So when driver unbind, this can trigger a use-after-free when DMA is torn down while the controller is still alive and triggers DMA transfers. | ||||
| CVE-2026-74414 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: Remove the duplicate attr inode dirty marking action Syzbot reported a null-ptr-deref in [1]. If the attributes file is not loaded during system mount, a trigger occurs [1] when setxattr is executed in userspace. Remove the first mark attr inode dirty operation. [1] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] Call Trace: hfsplus_setxattr+0x124/0x340 fs/hfsplus/xattr.c:555 hfsplus_trusted_setxattr+0x40/0x60 fs/hfsplus/xattr_trusted.c:30 __vfs_setxattr+0x43c/0x480 fs/xattr.c:218 __vfs_setxattr_noperm+0x12d/0x660 fs/xattr.c:252 vfs_setxattr+0x163/0x360 fs/xattr.c:339 do_setxattr fs/xattr.c:654 [inline] | ||||
| CVE-2026-74402 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-sha204a - fix blocking and non-blocking rng logic The blocking and non-blocking paths were failing to provide valid entropy due to improper buffer management. Reading the buffer starting from byte 1, only fetch the 32 bytes of random data from the return message. Tested on an Atmel SHA204A device. Before (here for blocking), tests showed repeatedly reading reduced bytes. $ head -c 32 /dev/hwrng | hexdump -C 00000000 02 28 85 b3 47 40 f2 ee 00 00 00 00 00 00 00 00 |.(..G@..........| 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 00000020 After, the result will be similar to the following: $ head -c 32 /dev/hwrng | hexdump -C 00000000 5a fc 3f 13 14 68 fe 06 68 0a bd 04 83 6e 09 69 |Z.?..h..h....n.i| 00000010 75 ff cf 87 10 84 3b c9 c1 df ae eb 45 53 4c c3 |u.....;.....ESL.| 00000020 | ||||
| CVE-2026-74400 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix crash in bpf_[set|remove]_dentry_xattr for negative dentries bpf_set_dentry_xattr and bpf_remove_dentry_xattr BPF kfuncs attempt to lock the inode of the supplied dentry without checking if it is NULL. If a negative dentry is passed (e.g. from security_inode_create), d_inode(dentry) returns NULL, and inode_lock(inode) will cause a NULL pointer dereference. Trivially fix this by adding a NULL check for inode before attempting to lock it, returning -EINVAL if it is NULL. Additionally, drop WARN_ON(!inode) in bpf_xattr_read_permission() and bpf_xattr_write_permission(). These warnings could be triggered by passing a negative dentry to bpf_get_dentry_xattr() or the _locked variants of the xattr kfuncs, potentially causing a Denial of Service on systems with panic_on_warn enabled. Instead, simply return -EINVAL. | ||||
| CVE-2026-74395 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix devx subscribe-event unwind NULL dereference MLX5_IB_METHOD_DEVX_SUBSCRIBE_EVENT() links event_sub into sub_list before initializing the fields used by the shared error path. If eventfd_ctx_fdget() then fails, the unwind path dereferences event_sub->ev_file in uverbs_uobject_put() and calls subscribe_event_xa_dealloc() with an unset xa_key_level1. subscribe_event_xa_alloc() creates the XA entry exactly once for a given key_level1, on the first occurrence of that key. The unwind path must therefore call subscribe_event_xa_dealloc() exactly once for it as well. Enforce that by adding devx_key_in_sub_list() and calling subscribe_event_xa_dealloc() only when the last matching pending entry is being cleaned up. | ||||
| CVE-2026-74379 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dax/kmem: account for partial discontiguous resource upon removal When dev_dax_kmem_probe() partially succeeds (at least one range is mapped) but a subsequent range fails request_mem_region() or add_memory_driver_managed(), the probe silently continues, ultimately returning success, but with the corresponding range resource NULL'ed out. dev_dax_kmem_remove() iterates over all dax_device ranges regardless of if the underlying resource exists. When remove_memory() is called later, it returns 0 because the memory was never added which causes dev_dax_kmem_remove() to incorrectly assume the (nonexistent) resource can be removed and attempts cleanup on a NULL pointer. Fix this by skipping these ranges altogether, noting that these cases are considered success, such that the cleanup is still reached when all actually-added ranges are successfully removed. | ||||
| CVE-2026-74375 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: fix deadlock in read error recovery path raid1d and raid10d may resubmit a split md cloned bio while handling a read error. In this case, resubmitting the bio can lead to a deadlock if the array is suspended before md_handle_request() acquires an active_io reference via percpu_ref_tryget_live(). Since the cloned bio already holds an active_io reference, trying to acquire another reference via percpu_ref_tryget_live() can lead to a deadlock while the array is suspended. Fix this by using percpu_ref_get() for md cloned bios. | ||||
| CVE-2026-74373 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid1,raid10: fix bio accounting for split md cloned bios Use md_cloned_bio() to control bio accounting instead of relying on r1bio_existed in raid1 or the io_accounting flag in raid10. The previous logic does not reliably reflect whether a bio is an md cloned bio. When a failed bio is split and resubmitted via bio_submit_split_bioset() on the error path, this can lead to either double accounting for md cloned bios, or missing accounting for bios returned from bio_submit_split_bioset() Fix this by using md_cloned_bio() to detect md cloned bios and skip accounting accordingly. | ||||
| CVE-2026-74366 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix NULL deref in change_sta_links for unready link _ieee80211_set_active_links() calls _ieee80211_link_use_channel() for each newly-added link and WARN_ON_ONCE()s if it fails. The call uses assign_on_failure=true, which allows mac80211 to continue despite driver failures, but when a mac80211-level channel validation fails (e.g., combinations check, DFS, or no available radio), drv_assign_vif_chanctx() is never reached. Since ath12k_mac_vdev_create() is only called from that path, arvif->is_created remains false and arvif->ar remains NULL for the failed link. The subsequent drv_change_sta_links() call reaches ath12k_mac_op_change_sta_links(), which allocates an arsta and sets ahsta->links_map |= BIT(link_id) for the broken link before checking whether the link is ready. When the vdev was never created, only station_add() is skipped, but the link remains in links_map. Any subsequent operation iterating links_map and dereferencing arvif->ar without a NULL check will crash. Two observed examples are NULL deref in ath12k_mac_ml_station_remove() on disconnect and in ath12k_mac_op_set_key() when wpa_supplicant installs PTK keys. BUG: Unable to handle kernel NULL pointer dereference at 0x00000000 pc : ath12k_mac_station_post_remove+0x40/0xe8 [ath12k] Call trace: ath12k_mac_station_post_remove+0x40/0xe8 [ath12k] ath12k_mac_op_sta_state+0xb60/0x1720 [ath12k] drv_sta_state+0x100/0xbd8 [mac80211] __sta_info_destroy_part2+0x148/0x178 [mac80211] ieee80211_set_disassoc+0x500/0x678 [mac80211] BUG: Unable to handle kernel NULL pointer dereference at 0x00000000 pc : ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k] Call trace: ath12k_mac_op_set_key+0x1f8/0x2c0 [ath12k] drv_set_key+0x70/0x100 [mac80211] ieee80211_key_enable_hw_accel+0x78/0x260 [mac80211] ieee80211_add_key+0x16c/0x2ac [mac80211] nl80211_new_key+0x138/0x280 [cfg80211] Fix this by checking arvif->is_created before calling ath12k_mac_alloc_assign_link_sta(). This prevents the broken link from entering links_map, so all subsequent operations iterating the bitmap are protected. The reliability of arvif->is_created across all error paths is ensured by the preceding patch. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 | ||||
| CVE-2026-74348 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: require a ref for locking_state debugfs open debug_lockres_open() copies inode->i_private into struct debug_lockres and debug_lockres_release() later drops that pointer with dlm_put(). That only works if open successfully pins the struct dlm_ctxt. Today open calls dlm_grab(dlm) but ignores its return value. Once the last domain unregister has removed the context from dlm_domains, dlm_grab() returns NULL, yet open still stores the raw pointer and returns success. The later release path is outside the debugfs removal barrier, so it can call dlm_put() after dlm_free_ctxt_mem() has freed the context. KASAN reports this as a slab-use-after-free in dlm_put() called from debug_lockres_release(). Fail the open when dlm_grab() cannot acquire the reference and unwind the seq_file private state before returning. That keeps locking_state from handing out a file descriptor whose release path does not own the dlm_ctxt. The buggy scenario involves two paths, with each column showing the order within that path: locking_state debugfs open: last domain unregister: 1. debug_lockres_open() reads 1. dlm_unregister_domain() calls inode->i_private. dlm_complete_dlm_shutdown(). 2. debug_lockres_open() calls 2. shutdown removes the dlm_ctxt from dlm_grab(dlm) and gets NULL. dlm_domains. 3. open still stores the raw dlm 3. final teardown reaches pointer in dl->dl_ctxt and dlm_free_ctxt_mem() and frees it. returns success. 4. debug_lockres_release() later calls dlm_put(dl->dl_ctxt). Validation reproduced this kernel report: KASAN slab-use-after-free in dlm_put+0x82/0x200 RIP: 0033:0x7f4d349bc9e0 The buggy address belongs to the object at ffff888103a3c000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 816 bytes inside of freed 2048-byte region [ffff888103a3c000, ffff888103a3c800) Write of size 4 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xd0/0x630 (?:?) dlm_put+0x82/0x200 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x188/0x2f0 (?:?) kasan_report+0xe4/0x120 (?:?) kasan_check_range+0x105/0x1b0 (?:?) debug_lockres_release+0x53/0x80 (fs/ocfs2/dlm/dlmdebug.c:587) dlm_put+0x9/0x200 (?:?) debug_lockres_release+0x5c/0x80 (fs/ocfs2/dlm/dlmdebug.c:587) full_proxy_release+0x67/0x90 (?:?) __fput+0x1df/0x4b0 (?:?) do_raw_spin_lock+0x10f/0x1b0 (?:?) fput_close_sync+0xd2/0x170 (?:?) __x64_sys_close+0x55/0x90 (?:?) do_syscall_64+0x10c/0x640 (arch/x86/entry/syscall_64.c:87) irqentry_exit+0xac/0x6e0 (?:?) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) Freed by task stack: kasan_save_stack+0x33/0x60 (?:?) kasan_save_track+0x14/0x30 (?:?) kasan_save_free_info+0x3b/0x60 (?:?) __kasan_slab_free+0x5f/0x80 (?:?) kfree+0x30f/0x580 (?:?) dlm_put+0x1ce/0x200 (?:?) dlm_unregister_domain+0xf6/0xb30 (?:?) o2cb_cluster_disconnect+0x6b/0x90 (?:?) ocfs2_cluster_disconnect+0x41/0x70 (?:?) ocfs2_dlm_shutdown+0x1c4/0x220 (?:?) ocfs2_dismount_volume+0x38a/0x550 (?:?) generic_shutdown_super+0xc3/0x220 (?:?) kill_block_super+0x29/0x60 (?:?) deactivate_locked_super+0x66/0xe0 (?:?) cleanup_mnt+0x13d/0x210 (?:?) task_work_run+0xfa/0x170 (?:?) exit_to_user_mode_loop+0xd6/0x430 (?:?) do_syscall_64+0x3cb/0x640 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||
| CVE-2026-74337 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NMI/tracepoint re-entry deadlock on lru locks NMI and tracepoint BPF programs can re-enter the per-CPU or global LRU lock that bpf_lru_pop_free()/push_free() already hold on the same CPU, AA-deadlocking. Lockdep reports "inconsistent {INITIAL USE} -> {IN-NMI}" on &l->lock (syzbot c69a0a2c816716f1e0d5) and "possible recursive locking detected" on &loc_l->lock (syzbot 18b26edb69b2e19f3b33). Prior trylock and rqspinlock based fixes (see links) were nacked because compromised on reliability. This patch converts every LRU lock site to rqspinlock_t and adds a recovery path for some failure windows to avoid node leaks. Failure recovery: - *_pop_free top-level: return NULL; prealloc_lru_pop() already treats that as no-free-element (-ENOMEM). - Cross-CPU steal: skip the victim's locked loc_l, try next CPU. - Post-steal local lock fail: publish stolen node to lockless per-CPU free_llist; next pop on this CPU picks it up. - push_free fail: mark node pending_free=1. __local_list_flush(), __local_list_pop_pending() reclaim the node from pending_list. __bpf_lru_list_shrink_inactive() reclaims the node from inactive list. Nodes from active list are reclaimed by __bpf_lru_list_shrink() or after __bpf_lru_list_rotate_active() demotes it to the inactive. | ||||
| CVE-2026-74335 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NULL pointer dereference in bpf_task_from_vpid() bpf_task_from_vpid() looks up a task in the pid namespace of the current task, via find_task_by_vpid(): find_task_by_vpid(vpid) find_task_by_pid_ns(vpid, task_active_pid_ns(current)) find_pid_ns(nr, ns) -> idr_find(&ns->idr, nr) cgroup_skb programs run in softirq, which may interrupt a task that is itself in do_exit(). Once that task has passed exit_notify() -> release_task() -> __unhash_process(), its thread_pid is cleared, so task_active_pid_ns(current) returns NULL and find_pid_ns() dereferences &NULL->idr: BUG: kernel NULL pointer dereference, address: 0000000000000050 RIP: 0010:idr_find+0x11/0x30 lib/idr.c:176 Call Trace: <IRQ> find_pid_ns kernel/pid.c:370 [inline] find_task_by_pid_ns+0x3b/0xe0 kernel/pid.c:485 bpf_task_from_vpid+0x5b/0x200 kernel/bpf/helpers.c:2916 bpf_prog_run_array_cg+0x17e/0x530 kernel/bpf/cgroup.c:81 __cgroup_bpf_run_filter_skb+0x12b/0x250 kernel/bpf/cgroup.c:1612 sk_filter_trim_cap+0x1dc/0x4c0 net/core/filter.c:148 tcp_v4_rcv+0x18d1/0x2200 net/ipv4/tcp_ipv4.c:2223 </IRQ> <TASK> do_exit+0xa63/0x1270 kernel/exit.c:1010 get_signal+0x141c/0x1530 kernel/signal.c:3037 Bail out when current has no pid namespace. | ||||
| CVE-2026-74331 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Fix recursive lock in device_cache_fw_images() A recursive locking deadlock can occur in the firmware loader's power management notification handler. During system suspend or hibernation preparation, fw_pm_notify() calls device_cache_fw_images(). This function acquires fw_lock to set the firmware cache state to FW_LOADER_START_CACHE and then iterates over all devices using dpm_for_each_dev() while still holding the lock. For each device, dev_cache_fw_image() schedules asynchronous work to cache the firmware. If memory allocation for the async work entry fails (e.g., in out-of-memory conditions), async_schedule_node_domain() falls back to executing the work function synchronously in the current thread. The synchronous execution path (__async_dev_cache_fw_image() -> cache_firmware() -> request_firmware() -> assign_fw()) attempts to acquire fw_lock again. Since the current thread already holds fw_lock, this results in a recursive locking deadlock. Fix this by releasing fw_lock immediately after updating the cache state and before calling dpm_for_each_dev(). The lock is only needed to protect the state update. Concurrent firmware requests will correctly see the FW_LOADER_START_CACHE state and use the piggyback mechanism, which is independently protected by its own fwc->name_lock. | ||||
| CVE-2026-74327 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vmalloc: fix NULL pointer dereference in is_vm_area_hugepages() find_vm_area() can return NULL if the given address is not a valid vmalloc area. Check the return value before dereferencing it to avoid a kernel crash. | ||||
| CVE-2026-74324 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: validate skb length in testmode query In mt7925_tm_query(), the response skb from mt76_mcu_send_and_get_msg() is used in a memcpy without validating its length: memcpy(evt_resp, skb->data + 8, MT7925_EVT_RSP_LEN); where MT7925_EVT_RSP_LEN is 512. If the firmware returns a response shorter than 520 bytes (8 + 512), this reads beyond the skb data buffer. The over-read data is then returned to userspace via nla_put() in mt7925_testmode_dump(). Add a length check before the memcpy to ensure the skb contains sufficient data. | ||||
| CVE-2026-74322 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Fix possible NULL pointer dereference in mt7996_mac_write_txwi_80211() For injected frames (e.g. via radiotap), mac80211 can pass info->control.vif = NULL, as explicitly noted in struct ieee80211_tx_info. Check vif pointer before executing ieee80211_vif_is_mld() in mt7996_mac_write_txwi_80211 routine in order to avoid a possible NULL pointer dereference. | ||||
| CVE-2026-74308 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix kernel BUG in ext4_write_inline_data_end When the data=journal mount option is used, the ext4_journalled_write_end() function incorrectly calls ext4_write_inline_data_end() without checking if the EXT4_STATE_MAY_INLINE_DATA flag is still set on the inode. If a previous attempt to convert the inline data to an extent failed (e.g. due to ENOSPC), the EXT4_STATE_MAY_INLINE_DATA flag is cleared, but the EXT4_INODE_INLINE_DATA flag remains set. In this scenario, the next call to ext4_write_begin() will not prepare the inline data xattr for writing, but ext4_journalled_write_end() will incorrectly attempt to write to it, triggering a BUG_ON(pos + len > EXT4_I(inode)->i_inline_size) in ext4_write_inline_data() since i_inline_size was not expanded. Fix this by ensuring that ext4_journalled_write_end() only calls ext4_write_inline_data_end() if the EXT4_STATE_MAY_INLINE_DATA flag is set, mirroring the behavior of ext4_write_end() and ext4_da_write_end(). | ||||
| CVE-2026-74304 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device hu->serdev is NULL for hci_uart attached via non-serdev paths, but qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev) and dereferences the result, causing a NULL pointer dereference. Fix by guarding the dereference with a NULL check, consistent with the rest of qca_setup(). | ||||
| CVE-2026-74303 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: fix NULL pointer dereference in qca_dmp_hdr() for non-serdev device hu->serdev is NULL for hci_uart attached via non-serdev paths, but qca_dmp_hdr() unconditionally dereferences hu->serdev->dev.driver->name, causing a NULL pointer dereference. Fix by guarding the dereference with a NULL check and falling back to "hci_ldisc_qca" for the non-serdev case. | ||||
| CVE-2026-74301 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtk: fix URB leak in alloc_mtk_intr_urb error path When btmtk_isopkt_pad() fails, the previously allocated URB is not freed, leaking the urb structure. Add usb_free_urb() before returning the error. | ||||