Export limit exceeded: 16673 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16673 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-18726 | 1 Redhat | 2 Enterprise Linux, Open Iscsi | 2026-08-13 | 6.5 Medium |
| A flaw was found in open-iscsi. This vulnerability allows a remote attacker on the same local network segment to cause a Denial of Service (DoS) in the iscsiuio daemon. By sending a specially crafted Internet Control Message Protocol version 6 (ICMPv6) Router Advertisement with a zero-length option, the attacker can trigger an infinite loop. This leads to sustained CPU usage, rendering the daemon unresponsive and impacting system availability. A secondary risk of out-of-bounds reads exists with a short IPv6 payload, though no memory corruption or data exposure has been confirmed. | ||||
| CVE-2026-18358 | 1 Redhat | 1 Enterprise Linux | 2026-08-13 | 7.5 High |
| A flaw was found in gnome-remote-desktop as shipped in Red Hat Enterprise Linux. When the daemon is running in system mode with RDP enabled, the incoming connection handler bypasses the connection throttler, allowing an unauthenticated remote attacker to open many parallel pre-authentication connections to the RDP listener. This can accumulate accepted sockets and pending routing-token operations until timeout, exhausting resources and preventing legitimate users from establishing RDP sessions. This issue does not affect the upstream version. | ||||
| CVE-2026-14180 | 1 Redhat | 14 Apache Camel Hawtio, Build Of Apache Camel - Hawtio, Build Of Apache Camel For Spring Boot and 11 more | 2026-08-13 | 5.3 Medium |
| A flaw was found in the ChunkReader component of the Undertow HTTP server, which is used by WildFly and JBoss EAP to handle chunked transfer encoding. The issue occurs because the parser uses a single internal variable to store both the remaining chunk size and state flags. By sending a specially crafted request with an extremely large chunk size, an attacker can cause these values to overlap, tricking the parser into thinking a request has finished prematurely. This can allow a second, "smuggled" request to be processed out of sync, potentially bypassing security controls. | ||||
| CVE-2026-19548 | 2 Gnu, Redhat | 7 Binutils, Adminutil, Enterprise Linux and 4 more | 2026-08-13 | 5.5 Medium |
| Multiple Use-After-Free vulnerabilities were found in the add_archive_element function in ld/ldmain.c of the GNU linker (ld), a component of binutils. The root cause is that plugin_maybe_claim() in ld/plugin.c frees the original BFD object via bfd_close/_bfd_delete_bfd when entry->the_bfd->my_archive == NULL, but the caller retains both the original abfd parameter and a shallow copy (orig_input.the_bfd) as dangling pointers. These dangling pointers are subsequently dereferenced at three distinct locations in add_archive_element: 1. Line ~1442: accessing abfd->my_archive via bfd_usrdata(abfd->my_archive) 2. Line ~1493: multiple accesses to abfd and abfd->my_archive in a conditional check and bfd_get_filename call 3. Line ~1525: dereferencing the shallow copy orig_input.the_bfd->my_archive in trace/verbose logging The vulnerability is triggered when LTO plugins are active (link_info.lto_plugin_active is true) and the input object has abfd->my_archive == NULL, which is a valid state for standalone object files. Red Hat builds binutils with --enable-plugins and --enable-lto, confirming the vulnerable code path is compiled in and reachable. An attacker who can supply a crafted object or archive file to a build process using LTO-enabled linking could exploit this flaw to cause a denial of service (linker crash via segmentation fault). Arbitrary code execution is theoretically possible through heap manipulation but is substantially mitigated by hardening measures including stack protector, FORTIFY_SOURCE, ASLR, and PIE. The attack surface is limited to build-time environments — the linker is a development tool not exposed in production runtime. The most realistic exploitation scenario is a supply chain attack introducing a crafted object file as a build dependency in CI/CD pipelines or development environments. | ||||
| CVE-2026-15028 | 1 Redhat | 3 Enterprise Linux, Hummingbird, Openshift | 2026-08-13 | 3.9 Low |
| A flaw was found in libarchive. This vulnerability allows a remote attacker to trigger a heap overflow by providing a specially crafted tar archive. The issue occurs during the parsing of a PAX extended header containing a malformed SUN.holesdata sparse-file attribute. Successful exploitation could lead to a denial of service, making the system unavailable, or potentially allow for arbitrary code execution, giving the attacker control over the affected system. | ||||
| CVE-2024-26882 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-08-12 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ip_tunnel: make sure to pull inner header in ip_tunnel_rcv() Apply the same fix than ones found in : 8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()") 1ca1ba465e55 ("geneve: make sure to pull inner header in geneve_rx()") We have to save skb->network_header in a temporary variable in order to be able to recompute the network_header pointer after a pskb_inet_may_pull() call. pskb_inet_may_pull() makes sure the needed headers are in skb->head. syzbot reported: BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] BUG: KMSAN: uninit-value in ip_tunnel_rcv+0xed9/0x2ed0 net/ipv4/ip_tunnel.c:409 __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] ip_tunnel_rcv+0xed9/0x2ed0 net/ipv4/ip_tunnel.c:409 __ipgre_rcv+0x9bc/0xbc0 net/ipv4/ip_gre.c:389 ipgre_rcv net/ipv4/ip_gre.c:411 [inline] gre_rcv+0x423/0x19f0 net/ipv4/ip_gre.c:447 gre_rcv+0x2a4/0x390 net/ipv4/gre_demux.c:163 ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:461 [inline] ip_rcv_finish net/ipv4/ip_input.c:449 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core net/core/dev.c:5534 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648 netif_receive_skb_internal net/core/dev.c:5734 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5793 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1556 tun_get_user+0x53b9/0x66e0 drivers/net/tun.c:2009 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2055 call_write_iter include/linux/fs.h:2087 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb6b/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: __alloc_pages+0x9a6/0xe00 mm/page_alloc.c:4590 alloc_pages_mpol+0x62b/0x9d0 mm/mempolicy.c:2133 alloc_pages+0x1be/0x1e0 mm/mempolicy.c:2204 skb_page_frag_refill+0x2bf/0x7c0 net/core/sock.c:2909 tun_build_skb drivers/net/tun.c:1686 [inline] tun_get_user+0xe0a/0x66e0 drivers/net/tun.c:1826 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2055 call_write_iter include/linux/fs.h:2087 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb6b/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b | ||||
| CVE-2024-26804 | 3 Debian, Linux, Redhat | 7 Debian Linux, Linux Kernel, Enterprise Linux and 4 more | 2026-08-12 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ip_tunnel: prevent perpetual headroom growth syzkaller triggered following kasan splat: BUG: KASAN: use-after-free in __skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170 Read of size 1 at addr ffff88812fb4000e by task syz-executor183/5191 [..] kasan_report+0xda/0x110 mm/kasan/report.c:588 __skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170 skb_flow_dissect_flow_keys include/linux/skbuff.h:1514 [inline] ___skb_get_hash net/core/flow_dissector.c:1791 [inline] __skb_get_hash+0xc7/0x540 net/core/flow_dissector.c:1856 skb_get_hash include/linux/skbuff.h:1556 [inline] ip_tunnel_xmit+0x1855/0x33c0 net/ipv4/ip_tunnel.c:748 ipip_tunnel_xmit+0x3cc/0x4e0 net/ipv4/ipip.c:308 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564 __dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4349 dev_queue_xmit include/linux/netdevice.h:3134 [inline] neigh_connected_output+0x42c/0x5d0 net/core/neighbour.c:1592 ... ip_finish_output2+0x833/0x2550 net/ipv4/ip_output.c:235 ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323 .. iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x1dbc/0x33c0 net/ipv4/ip_tunnel.c:831 ipgre_xmit+0x4a1/0x980 net/ipv4/ip_gre.c:665 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564 ... The splat occurs because skb->data points past skb->head allocated area. This is because neigh layer does: __skb_pull(skb, skb_network_offset(skb)); ... but skb_network_offset() returns a negative offset and __skb_pull() arg is unsigned. IOW, we skb->data gets "adjusted" by a huge value. The negative value is returned because skb->head and skb->data distance is more than 64k and skb->network_header (u16) has wrapped around. The bug is in the ip_tunnel infrastructure, which can cause dev->needed_headroom to increment ad infinitum. The syzkaller reproducer consists of packets getting routed via a gre tunnel, and route of gre encapsulated packets pointing at another (ipip) tunnel. The ipip encapsulation finds gre0 as next output device. This results in the following pattern: 1). First packet is to be sent out via gre0. Route lookup found an output device, ipip0. 2). ip_tunnel_xmit for gre0 bumps gre0->needed_headroom based on the future output device, rt.dev->needed_headroom (ipip0). 3). ip output / start_xmit moves skb on to ipip0. which runs the same code path again (xmit recursion). 4). Routing step for the post-gre0-encap packet finds gre0 as output device to use for ipip0 encapsulated packet. tunl0->needed_headroom is then incremented based on the (already bumped) gre0 device headroom. This repeats for every future packet: gre0->needed_headroom gets inflated because previous packets' ipip0 step incremented rt->dev (gre0) headroom, and ipip0 incremented because gre0 needed_headroom was increased. For each subsequent packet, gre/ipip0->needed_headroom grows until post-expand-head reallocations result in a skb->head/data distance of more than 64k. Once that happens, skb->network_header (u16) wraps around when pskb_expand_head tries to make sure that skb_network_offset() is unchanged after the headroom expansion/reallocation. After this skb_network_offset(skb) returns a different (and negative) result post headroom expansion. The next trip to neigh layer (or anything else that would __skb_pull the network header) makes skb->data point to a memory location outside skb->head area. v2: Cap the needed_headroom update to an arbitarily chosen upperlimit to prevent perpetual increase instead of dropping the headroom increment completely. | ||||
| CVE-2026-6245 | 2 Fedoraproject, Redhat | 4 Sssd, Enterprise Linux, Openshift and 1 more | 2026-08-12 | 5.5 Medium |
| A flaw was found in the System Security Services Daemon (SSSD). The pam_passkey_child_read_data() function within the PAM passkey responder fails to properly handle raw bytes received from a pipe. Because the data is treated as a NUL-terminated C string without explicit termination, it results in an out-of-bounds read when processed by functions like snprintf(). A local attacker could potentially trigger this vulnerability by initiating a crafted passkey authentication request, causing the SSSD PAM responder to crash, resulting in a local Denial of Service (DoS). | ||||
| CVE-2026-72694 | 2 Mrtgconfig, Redhat | 2 Mrtg, Enterprise Linux | 2026-08-12 | 7.1 High |
| A flaw was found in MRTG. When the MRTG daemon is started as a root user and subsequently drops privileges, a local, low-privileged attacker can exploit a symbolic link (symlink) following vulnerability. By influencing or pre-placing a symlink in the process ID (PID) file path, the attacker can trick the root process into changing the ownership of an arbitrary existing file to the daemon user. This can lead to local privilege escalation, allowing unauthorized access to or modification of sensitive files. | ||||
| CVE-2026-59087 | 2 Gimp, Redhat | 2 Gimp, Enterprise Linux | 2026-08-12 | 7.8 High |
| A flaw was found in the GIMP image manipulation program, specifically within its Seattle Filmworks file loader. A remote attacker could exploit this vulnerability by tricking a user into opening a specially crafted Seattle Filmworks file. This could lead to a heap overflow, allowing the attacker to write several kilobytes of controlled data beyond the intended memory buffer. Such an overflow can result in memory corruption, potentially leading to arbitrary code execution or a denial of service. | ||||
| CVE-2026-55654 | 3 Openbsd, Openssh, Redhat | 8 Openssh, Openssh, Enterprise Linux and 5 more | 2026-08-12 | 3.7 Low |
| A flaw was found in OpenSSH. This vulnerability, a heap out-of-bounds read, occurs during the cleanup of GSSAPI (Generic Security Service Application Programming Interface) indicators when a trailing NULL termination is missing in the auth-indicators array. A remote attacker, under specific configurations involving GSSAPI authentication and a Kerberos environment, could exploit this to cause the SSH authentication path to crash or abort. This leads to a denial of service (DoS), impacting the availability of the SSH service. | ||||
| CVE-2026-55655 | 3 Openbsd, Openssh, Redhat | 8 Openssh, Openssh, Enterprise Linux and 5 more | 2026-08-12 | 5 Medium |
| A flaw was found in OpenSSH. A local unprivileged attacker on a Linux client host can hijack client-side X11 forwarding connections. This is possible by pre-binding the preferred abstract X socket name when X11 forwarding is enabled and a local UNIX-domain X socket is used. A successful attack can compromise the confidentiality of forwarded X11 traffic, including sensitive window contents and input, and may allow some manipulation of the forwarded session. | ||||
| CVE-2026-55653 | 3 Openbsd, Openssh, Redhat | 8 Openssh, Openssh, Enterprise Linux and 5 more | 2026-08-12 | 4.3 Medium |
| A flaw was found in OpenSSH. A malicious SSH server can exploit a double free vulnerability in the Diffie-Hellman Group Exchange (DH-GEX) client path. This occurs during FIPS (Federal Information Processing Standards) mode known-group validation when the client processes attacker-controlled DH-GEX group parameters. Successful exploitation leads to client-side process termination, resulting in a Denial of Service (DoS). | ||||
| CVE-2026-54231 | 3 Abrt Project, Fedoraproject, Redhat | 3 Abrt, Fedora, Enterprise Linux | 2026-08-12 | 5.5 Medium |
| A content injection vulnerability was found in the ABRT post-create event handler scripts in libreport. The event script queries the systemd journal for log entries matching the crashed process and writes the results to files in the dump directory without sanitizing embedded control characters. A local user can inject arbitrary content into the journal output by embedding newline characters in syslog messages, controlling the content that root writes to dump directory files. | ||||
| CVE-2026-14258 | 2 Dhcpcd Project, Redhat | 2 Dhcpcd, Enterprise Linux | 2026-08-12 | 6.5 Medium |
| A flaw was found in dhcpcd's IPv6 Neighbor Discovery Router Advertisement processing. A specially crafted IPv6 Router Advertisement containing a zero-length Neighbor Discovery option can bypass validation during packet storage and later be reparsed without adequate validation, causing the parser to enter a non-advancing loop. Successful exploitation may result in excessive CPU consumption, leading to a denial of service. | ||||
| CVE-2026-54230 | 3 Abrt Project, Fedoraproject, Redhat | 3 Abrt, Fedora, Enterprise Linux | 2026-08-12 | 7 High |
| A symlink following vulnerability was found in the ABRT post-create event handler scripts in libreport. Event scripts write output files using shell redirections without the O_NOFOLLOW flag. If the target file is replaced with a symlink, the shell process running as root follows the symlink and writes content to the symlink target, allowing arbitrary file overwrites on the system. | ||||
| CVE-2026-54229 | 1 Redhat | 6 Enterprise Linux, Rhel Aus, Rhel E4s and 3 more | 2026-08-12 | 7 High |
| A race condition was found in the abrt-dbus D-Bus service's ChownProblemDir method. ChownProblemDir opens the dump directory with DD_OPEN_READONLY and calls dd_chown to change ownership of all files to the caller's uid, succeeding even while post-create event handlers hold a write lock. This allows an attacker to gain filesystem-level control of the dump directory while privileged event scripts are still running. | ||||
| CVE-2026-54228 | 1 Redhat | 6 Enterprise Linux, Rhel Aus, Rhel E4s and 3 more | 2026-08-12 | 7.8 High |
| A time-of-check time-of-use (TOCTOU) race condition was found in the abrt-dbus D-Bus service's SetElement method. Between dump directory creation and post-create event execution, any local user can call SetElement to write arbitrary text files into the root-owned dump directory, bypassing package validation and allowing crashes of unpackaged binaries to survive post-create processing. | ||||
| CVE-2026-56208 | 2 Aomedia, Redhat | 14 Libaom, Ai Inference Server, Enterprise Linux and 11 more | 2026-08-12 | 7.6 High |
| A heap buffer overflow vulnerability was found in libaom, the reference AV1 codec implementation. A flaw in the AV1 encoder's Look-Ahead Processing (LAP) mode causes the first-pass stats ring buffer wrap-around guard to be bypassed when g_lag_in_frames is set to 1 or higher. This results in a 232-byte out-of-bounds write on every encoded frame after the second, corrupting adjacent heap objects. An attacker who can influence encoder configuration in a transcoding service or WebRTC session could exploit this to cause a denial of service (process crash) or potentially achieve code execution. | ||||
| CVE-2026-59090 | 2 Gimp, Redhat | 2 Gimp, Enterprise Linux | 2026-08-12 | 8.4 High |
| A flaw was found in GIMP's PSD file format plugin. This vulnerability, an unsigned integer underflow in the `block_rem` variable, occurs when a user opens a specially crafted `.psd` image file. The underflow leads to parser confusion, enabling an attacker to inject arbitrary data as layer resource blocks. This can ultimately result in arbitrary code execution, allowing the attacker to run malicious code on the victim's system. | ||||