Export limit exceeded: 24813 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24813 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-75141 | 1 Ffmpeg | 1 Ffmpeg | 2026-08-19 | 7.8 High |
| FFmpeg before commit acf5d7c contains a heap buffer overflow in the hvcC box writer. When writing an HEVC configuration record with more NAL units of a single type than the count field can represent, the NAL unit count overflows, causing a heap buffer overflow. A crafted HEVC input file triggers the overflow during muxing. | ||||
| CVE-2026-75147 | 1 Ffmpeg | 1 Ffmpeg | 2026-08-19 | 7.1 High |
| FFmpeg before commit 983dae9 contains an out-of-bounds read in the AV1 RTP packetizer (libavformat/rtpenc_av1.c). The keyframe detection loop that searches for a sequence header OBU advanced its pointer and remaining-size counter by the encoded header length plus the OBU payload size without first bounding the OBU size against the remaining data. A crafted OBU size causes the remaining-size counter to wrap to a positive value, causing the next loop iteration to dereference a pointer beyond the end of the packet buffer. A crafted AV1 input packet muxed to RTP triggers the out-of-bounds read. | ||||
| CVE-2026-75143 | 1 Ffmpeg | 1 Ffmpeg | 2026-08-19 | 9.8 Critical |
| FFmpeg before commit 1c10bcc contains a heap buffer overflow in the RIST protocol reader (libavformat/librist.c). librist_read() ignored its size argument and copied the full received payload length into the caller-provided destination buffer, overflowing it when the payload exceeds the destination size. This is reachable via the async:rist:// URL scheme, where the async wrapper supplies a smaller buffer than the received payload. A remote RIST sender can trigger the overflow by sending a packet whose payload exceeds the caller buffer size. | ||||
| CVE-2026-75142 | 1 Ffmpeg | 1 Ffmpeg | 2026-08-19 | 7.8 High |
| FFmpeg before commit 9d786e4 contains a stack buffer overflow in the MPEG-PS muxer (libavformat/mpegenc.c). When muxing input with more streams than the muxer's fixed-size stack buffer accommodates, the buffer is overflowed. A crafted input with an excessive number of streams triggers the overflow during MPEG-PS muxing. | ||||
| CVE-2026-75144 | 1 Ffmpeg | 1 Ffmpeg | 2026-08-19 | 7.8 High |
| FFmpeg before commit 1cdeb3c contains a heap buffer overflow vulnerability in the VC-2/Dirac RTP packetizer (libavformat/rtpenc_vc2hq.c) that allows attackers to trigger memory corruption by supplying a crafted Dirac data unit. The packetizer copies an input-derived data unit or fragment size into a fixed-size buffer without an upper bound check, causing a heap buffer overflow when the crafted input is packetized for RTP output. | ||||
| CVE-2026-58013 | 2 Gnome, Redhat | 4 Glib, Enterprise Linux, Hardened Images and 1 more | 2026-08-19 | 6.5 Medium |
| A flaw was found in GLib. A buffer over-read can occur in g_io_channel_read_line_backend() in the giochannel.c file when a custom line terminator with a length greater than one is set, causing memcmp to read past the GString buffer. This vulnerability can cause a minor information disclosure of 7 bytes or a denial of service when the buffer over-read crosses a page boundary. | ||||
| CVE-2026-58012 | 2 Gnome, Redhat | 4 Glib, Enterprise Linux, Hardened Images and 1 more | 2026-08-19 | 6.5 Medium |
| A flaw was found in GLib. A buffer over-read can occur in the g_regex_replace function when used with the `G_REGEX_RAW` compile flag and case-change replacement escapes because the string_append function processes matched substrings using UTF-8 functions that assume valid UTF-8 input, even when the string is treated as raw bytes. This vulnerability can cause a minor information disclosure of 1-5 bytes and a denial of service when the buffer over-read crosses a page boundary. | ||||
| CVE-2026-58011 | 2 Gnome, Redhat | 4 Glib, Enterprise Linux, Hardened Images and 1 more | 2026-08-19 | 6.5 Medium |
| A flaw was found in GLib. An out-of-bounds read of only 2 bytes can occur in the g_date_time_get_ymd function in the glib/gdatetime.c file when an invalid GDateTime object produced by the g_date_time_add_full function is processed. This flaw can corrupt the date output and potentially cause logic errors that may lead to a denial of service. | ||||
| CVE-2026-58010 | 2 Gnome, Redhat | 4 Glib, Enterprise Linux, Hardened Images and 1 more | 2026-08-19 | 6.5 Medium |
| A flaw was found in GLib. An off-by-one error can occur in the gvs_tuple_is_normal function in the glib/gvariant-serialiser.c file when doing an alignment padding check because the bounds check uses > instead of >=, causing an out-of-bounds read of only 1 byte. This issue can cause a minor information disclosure of 1 byte and a denial of service when the out-of-bounds read crosses a page boundary. | ||||
| CVE-2025-5222 | 2 Redhat, Unicode | 5 Enterprise Linux, Openshift, Rhel E4s and 2 more | 2026-08-19 | 7 High |
| A stack buffer overflow was found in Internationl components for unicode (ICU ). While running the genrb binary, the 'subtag' struct overflowed at the SRBRoot::addTag function. This issue may lead to memory corruption and local arbitrary code execution. | ||||
| CVE-2026-74569 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp() sip_help_tcp() stores the size change of each NAT-rewritten SIP message in s16 diff and accumulates it in s16 tdiff, but a single message can grow by more than S16_MAX while the packet stays under the 65535 enlarge_skb() limit: nf_nat_sip() rewrites every matching URI, and a long Contact list expands the message by tens of kilobytes. diff then wraps, and "datalen = datalen + diff - msglen" yields a huge unsigned datalen, so the next iteration's ct_sip_get_header() reads past the linearized skb tail. Widen diff, tdiff and the seq_adjust hook to s32. Both are bounded by the 65535 byte packet limit, and the seqadj core is already s32 (nf_ct_seqadj_set() takes s32), so no previously accepted input is rejected. BUG: KASAN: use-after-free in ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464) Read of size 1 at addr ffff888010800000 by task ksoftirqd/1/25 ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464) sip_help_tcp (net/netfilter/nf_conntrack_sip.c:1694) nf_confirm (net/netfilter/nf_conntrack_proto.c:183) nf_hook_slow (net/netfilter/core.c:619) ip6_output (net/ipv6/ip6_output.c:246) ip6_forward (net/ipv6/ip6_output.c:690) ipv6_rcv (net/ipv6/ip6_input.c:351) __netif_receive_skb_one_core (net/core/dev.c:6212) process_backlog (net/core/dev.c:6676) __napi_poll (net/core/dev.c:7735) net_rx_action (net/core/dev.c:7955) handle_softirqs (kernel/softirq.c:622) run_ksoftirqd (kernel/softirq.c:1076) ... | ||||
| CVE-2026-74557 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Fix stale-data leak into the SCSI sense buffer iscsi_scsi_cmd_rsp() copies the sense data of a SCSI Response from the target-supplied data segment. The segment carries a 2-byte sense length followed by the sense bytes, so it must hold 2 + senselen bytes, but the bounds check only requires datalen >= senselen: senselen = get_unaligned_be16(data); if (datalen < senselen) goto invalid_datalen; memcpy(sc->sense_buffer, data + 2, min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE)); A target that returns a SCSI Response whose datalen equals senselen (with senselen <= SCSI_SENSE_BUFFERSIZE) makes the memcpy() from data + 2 read up to two bytes past the received data. Those bytes are stale conn->data contents and end up in the command's sense buffer, which is returned to userspace. Account for the 2-byte sense length prefix in the check. | ||||
| CVE-2026-74498 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix DMA buffer out-of-bounds write when fill_max is set When a USB audio endpoint requests full packet transfers via the fill_max descriptor flag, data_ep_set_params() promotes ep->curpacksize to ep->maxpacksize. However, maxsize is left at the original sample-rate derived value. Since u->buffer_size is allocated as maxsize * packets, the resulting DMA buffer is far too small for the requested transfer length. When the USB host controller streams up to curpacksize bytes per packet, it writes past the end of the buffer via DMA, corrupting kernel heap memory. Update maxsize to curpacksize when fill_max is set so that the allocated DMA buffer size matches the actual transfer request size. [ changed to reassign maxsize only when ep->fill_max is set -- tiwai ] | ||||
| CVE-2026-74485 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: reject a flag character as the field delimiter The registration string starts with a user chosen delimiter that separates the individual fields. So that the field parsers terminate even on a truncated string create_entry() pads the buffer with that same delimiter: memset(buf + count, del, 8); Most fields are scanned for the delimiter with strchr()/scanarg() and happily stop on the padding. The flags field is different: instead of scanning for the delimiter check_special_flags() consumes the flag characters 'P', 'O', 'C' and 'F' and stops at the first byte that is none of them, relying on the trailing delimiter to end the scan. If the delimiter is itself a flag character the padding no longer acts as a terminator. The scan swallows all eight padding bytes and keeps reading past the end of the allocation until it hits a byte that is not a flag character. For example registering PaPEPPxPPiP with 'P' as the delimiter (name "a", type extension, magic "x", interpreter "i", empty flags) leaves the flag scan running off the end of the buffer. The registration is rejected in the end because the parser does not stop exactly at buf + count, but only after the out of bounds read has already happened. With an unlucky allocation layout the scan can walk into an unmapped page; under KASAN it is reported as a slab out of bounds read. binfmt_misc mounts are available to unprivileged users in a user namespace so the read is reachable without privileges. Reject a delimiter that is one of the flag characters up front. Such a registration was always rejected anyway, only after the out of bounds read, so no valid registration string changes meaning. | ||||
| CVE-2026-74473 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: use pskb_network_may_pull() in route_shortcircuit() route_shortcircuit() currently calls pskb_may_pull(skb, sizeof(struct iphdr)) (or ipv6hdr), which checks if bytes are available starting from skb->data. However, in vxlan_xmit(), skb->data points to the MAC header, so skb_network_offset(skb) is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, 20) only checks 20 bytes from skb->data (which is 14 bytes MAC header + 6 bytes of IP header), leaving the rest of the IP header potentially un-pulled in non-linear frags. Subsequent dereferences of ip_hdr(skb)->daddr can read beyond the pulled linear buffer length. Fix this by using pskb_network_may_pull(), which adds skb_network_offset(skb) to the length check to ensure the full network header is present in the linear buffer. | ||||
| CVE-2026-74472 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ublk: reset kernel-owned dev_info fields in ublk_ctrl_add_dev() ublk_ctrl_add_dev() memcpy()s the userspace ublksrv_ctrl_dev_info into ub->dev_info and then fixes up the fields the driver owns, but misses ->state and ->ublksrv_pid. A device added with ->state = UBLK_S_DEV_LIVE passes the "->state != UBLK_S_DEV_DEAD" test that ublk_stop_dev_unlocked() uses as its proxy for "a disk is attached", while ->ub_disk is still NULL, so DEL_DEV right after ADD_DEV oopses in del_gendisk(). UBLK_S_DEV_QUIESCED plus UBLK_F_USER_RECOVERY dies one step earlier, in ublk_force_abort_dev(). A poisoned ->state also gets START_USER_RECOVERY and the char device read/write path onto a device that was never started, and wedges START_DEV at -EEXIST. A poisoned ->ublksrv_pid just makes GET_DEV_INFO report an unrelated task as the ublk server. Reset both after the memcpy(), as ublk_detach_disk() does. Userspace only ever reads these back, so correcting them silently breaks nothing. ADD_DEV has copied ->state in unsanitized since ublk was merged, but back then it was harmless: the gendisk was allocated during ADD_DEV, and both teardown and the START_DEV -EEXIST check keyed off disk_live() rather than ->state. The oops became reachable once the disk allocation moved to START_DEV and those checks switched to ->state. | ||||
| CVE-2026-74458 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents The wait and bulk receive paths walk variable-length commands from a USB buffer. A nonzero command shorter than CMD_HEADER_LEN can still be dispatched, and the wait path copies a matching command into a fixed caller-owned struct kvaser_cmd using the device-provided length. Reject nonzero commands that do not contain the fixed header or that extend beyond the current USB buffer item. In the wait path, also reject a matching command that exceeds the destination before copying it. | ||||
| CVE-2025-5635 | 1 Pcman | 1 Ftp Server | 2026-08-19 | 7.3 High |
| A vulnerability classified as critical was found in PCMan FTP Server 2.0.7. This vulnerability affects unknown code of the component PLS Command Handler. The manipulation leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2024-0731 | 1 Pcman | 1 Ftp Server | 2026-08-19 | 5.3 Medium |
| A vulnerability has been found in PCMan FTP Server 2.0.7 and classified as problematic. This vulnerability affects unknown code of the component PUT Command Handler. The manipulation leads to denial of service. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-251554 is the identifier assigned to this vulnerability. | ||||
| CVE-2024-0732 | 1 Pcman | 1 Ftp Server | 2026-08-19 | 5.3 Medium |
| A vulnerability was found in PCMan FTP Server 2.0.7 and classified as problematic. This issue affects some unknown processing of the component STOR Command Handler. The manipulation leads to denial of service. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-251555. | ||||