Export limit exceeded: 14882 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 10566 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 16271 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16271 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-19955 | 1 Traildb | 1 Traildb | 2026-08-16 | 3.5 Low |
| A vulnerability was detected in TrailDB 0.6. Impacted is the function tdb_open of the file /src/tdb.c of the component TOC Validation. The manipulation results in out-of-bounds read. It is possible to launch the attack remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-73055 | 2 Ericcornelissen, Shescape Project | 2 Shescape, Shescape | 2026-08-16 | 4.8 Medium |
| Shescape before 2.1.15 (and 3.0.0 before 3.0.2) fails to properly escape tilde (~) characters in assignment contexts on Unix systems where the shell is explicitly configured to "sh" or true and /bin/sh points to BusyBox. Using the escape and escapeAll APIs with untrusted input in an assignment prefixed to a command, an attacker can inject a tilde payload to disclose the user's home directory location and, depending on usage, alter the location on which a command operates. | ||||
| CVE-2026-19933 | 1 Defaultfuction | 1 Customer-relationship-management-in-c-project | 2026-08-16 | 6.3 Medium |
| A weakness has been identified in DefaultFuction Customer-Relationship-Management-In-C-Project 2.0. Impacted is the function gets of the component Customer Search Module. This manipulation causes stack-based buffer overflow. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. The project confirms, that "it’s being processed". | ||||
| CVE-2026-74324 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: validate skb length in testmode query In mt7925_tm_query(), the response skb from mt76_mcu_send_and_get_msg() is used in a memcpy without validating its length: memcpy(evt_resp, skb->data + 8, MT7925_EVT_RSP_LEN); where MT7925_EVT_RSP_LEN is 512. If the firmware returns a response shorter than 520 bytes (8 + 512), this reads beyond the skb data buffer. The over-read data is then returned to userspace via nla_put() in mt7925_testmode_dump(). Add a length check before the memcpy to ensure the skb contains sufficient data. | ||||
| CVE-2026-74346 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix OOB read during CQ MR registration Sashiko pointed out an unrelated bug during a previous patch: https://sashiko.dev/#/patchset/20260512183852.614045-1-jmoroni%40google.com This change fixes the bug by eliminating the cqmr->split field which was not being set properly and instead just checks the CQ resize feature flag directly. The cqmr->split field essentially tracks whether IRDMA_FEATURE_CQ_RESIZE is set, but it was not being set until CQ creation time, which is _after_ CQ memory registration (the only other place where it is referenced). As a result, it would always be false during MR registration and would therefore cause irdma_handle_q_mem to populate cqmr->shadow even for GEN_2 HW and beyond: cqmr->shadow = (dma_addr_t)arr[req->cq_pages]; The issue is that for GEN_2 and beyond, req->cq_pages may be exactly equal to iwmr->page_cnt and therefore equal to the size of arr, which would cause an OOB read by one. | ||||
| CVE-2026-74336 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: bound S1G TIM PVB walk to the TIM element ieee80211_s1g_check_tim() parses the S1G Partial Virtual Bitmap (PVB) of a received TIM element. The TIM is handed in as the element payload: ieee802_11_parse_elems_full() stores elems->tim = elem->data and elems->tim_len = elem->datalen (net/mac80211/parse.c), so the valid bytes are [tim, tim + tim_len). When walking the encoded blocks the function passes the walker an end sentinel of (const u8 *)tim + tim_len + 2, i.e. two bytes past the end of the element. ieee80211_s1g_find_target_block() loops while (ptr + 1 <= end) and dereferences ptr (and the per-mode ieee80211_s1g_len_*() helpers read *ptr), so it can read up to two bytes beyond the TIM element -- an out-of-bounds read of adjacent skb/heap data when the TIM is the last element in the frame. The +2 appears to account for the element id/len header, but tim already points past that header at the element payload, so the addend is wrong. Pass the correct element end, (const u8 *)tim + tim_len. | ||||
| CVE-2026-74391 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Bound synthetic-field strings with seq_buf The synthetic field helpers build a prefixed synthetic variable name and a generated hist command in fixed MAX_FILTER_STR_VAL buffers. The current code appends those strings with raw strcat(), so long key lists, field names, or saved filters can run past the end of the staging buffers. Build both strings with seq_buf and propagate -E2BIG if either the synthetic variable name or the generated command exceeds MAX_FILTER_STR_VAL. This keeps the existing tracing-side limit while using the helper intended for bounded command construction. [ sdr: Moved struct seq_buf *s for upside-down x-mas tree formatting ] | ||||
| CVE-2026-20268 | 1 Cisco | 2 Ios Xe, Ios Xe Software | 2026-08-14 | 8.6 High |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XE Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20268 are related to issues with improper restriction of operations within the bounds of a memory buffer that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-119. | ||||
| CVE-2026-20156 | 1 Cisco | 3 Cisco Roomos Software, Roomos, Roomos Cloud | 2026-08-14 | 8.1 High |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco RoomOS engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20156 are related to improper restriction of operations within the bounds of a memory buffer that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-119. | ||||
| CVE-2026-73480 | 1 Dundee | 1 Gdu | 2026-08-14 | 5 Medium |
| gdu fails to strip terminal escape sequences from directory and file names when printing paths after TUI exit. Attackers can craft malicious directory or file names containing escape sequences that are interpreted by the terminal, enabling title spoofing, clipboard manipulation, or other terminal-dependent effects. | ||||
| CVE-2026-19845 | 1 Totolink | 2 A800r, A800r Firmware | 2026-08-14 | 8.8 High |
| A vulnerability was determined in TOTOLINK A800R 4.1.2cu.5137_B20200730. This affects the function setStaticDhcpConfig of the file /cgi-bin/cstecgi.cgi of the component lan.so. Executing a manipulation of the argument Comment can lead to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. | ||||
| CVE-2026-19846 | 1 Totolink | 2 A800r, A800r Firmware | 2026-08-14 | 8.8 High |
| A vulnerability was identified in TOTOLINK A800R 4.1.2cu.5137_B20200730. This impacts the function setUrlFilterRules of the file /cgi-bin/cstecgi.cgi of the component firewall.so. The manipulation of the argument url leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit is publicly available and might be used. | ||||
| CVE-2026-73417 | 1 Jupyter | 1 Jupyterlab | 2026-08-14 | 8.3 High |
| jupyterlab is an extensible environment for interactive and reproducible computing, based on the Jupyter Notebook Architecture. From 3.3.0 until 4.5.10 and 4.6.2, JupyterLab allows notebook settings to be shared and applied through an overrides.json file using the Import button in the Settings Editor. In packages/notebook-extension/schema/tracker.json and packages/notebook-extension/src/index.ts, the sideBySideLeftMarginOverride and sideBySideRightMarginOverride settings are not properly validated before being inserted into style content, allowing a crafted settings file to contain instructions that execute as code instead of only changing display preferences. A user can import the malicious file, or an attacker with access to a shared settings location can plant an overrides.json that is applied automatically. The embedded code runs with the affected user's access and can read or modify notebooks and files and run code through the notebook server, including on a connected kernel. This issue is fixed in versions 4.5.10 and 4.6.2. | ||||
| CVE-2026-66753 | 2 Tiny-http Project, Tinyhttpd | 2 Tiny-http, Tinyhttpd | 2026-08-14 | 3.7 Low |
| tiny-http through 0.12.0 contains an HTTP header injection vulnerability that allows attackers to inject carriage return (0x0D) and line feed (0x0A) bytes into HTTP header values on both request and response sides due to insufficient validation in header parsing and serialization. Attackers can exploit this injection primitive to perform response splitting, cache poisoning, session fixation via Set-Cookie injection, security header override, and request smuggling against line-feed-tolerant backends. | ||||
| CVE-2026-54364 | 1 Gladinet | 1 Centrestack | 2026-08-14 | 6.5 Medium |
| CentreStack before 17.4 contains a session variable injection vulnerability that allows unauthenticated attackers to inject arbitrary session variables by embedding newline and tab characters into a crafted AccountName parameter posted to the SelectProvider.aspx endpoint. Attackers can exploit the lack of input sanitization in the custom session serialization format to inject a resellerid session variable, bypassing the IsValidRSession authentication check and gaining unauthorized access to management pages. | ||||
| CVE-2026-32841 | 2 Edimax, Edimax Technology | 3 Gs-5008pl, Gs-5008pl Firmware, Edimax Gs-5008pl | 2026-08-14 | 8.1 High |
| Edimax GS-5008PL firmware versions 1.00.54 and prior contain an authentication bypass vulnerability that allows unauthenticated attackers to access the management interface. Attackers can exploit the global authentication flag mechanism to gain administrative access without credentials after any user authenticates, enabling unauthorized password changes, firmware uploads, and configuration modifications. | ||||
| CVE-2026-19814 | 1 Totolink | 2 A800r, A800r Firmware | 2026-08-14 | 8.8 High |
| A vulnerability was detected in TOTOLINK A800R 4.1.2cu.5137_B20200730. Affected is the function setMacQos of the file /cgi-bin/cstecgi.cgi of the component firewall.so. Performing a manipulation of the argument macAddress results in stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit is now public and may be used. | ||||
| CVE-2026-19822 | 1 Tenda | 2 W20e, W20e Firmware | 2026-08-14 | 8.8 High |
| A vulnerability was identified in Tenda W20E 15.11.0.6(1068_1546_841)_CN_TDC. This issue affects the function lstAdd of the file /goform/editQos of the component QoS Edit. Such manipulation of the argument qosListConnecttedNum leads to stack-based buffer overflow. The attack may be launched remotely. The exploit is publicly available and might be used. | ||||
| CVE-2026-19812 | 1 Totolink | 2 A800r, A800r Firmware | 2026-08-14 | 8.8 High |
| A weakness has been identified in TOTOLINK A800R 4.1.2cu.5137_B20200730. This affects the function UploadCustomModule of the file /cgi-bin/cstecgi.cgi of the component product.so. This manipulation of the argument File causes stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. | ||||
| CVE-2026-19791 | 1 Tenda | 1 G0 | 2026-08-14 | 8.8 High |
| A weakness has been identified in Tenda G0 up to 20260625. The affected element is the function addStaticRoute of the file /goform/module of the component httpd web management interface. Executing a manipulation of the argument staticRouteNet can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. | ||||