Export limit exceeded: 402019 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (402019 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98309 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Use managed KMS polling to fix UAF on unbind vc4_kms_load() calls drm_kms_helper_poll_init() but the driver provides no matching drm_kms_helper_poll_fini(). The output poll work stays scheduled after unbind and runs on the freed drm_device: # modprobe vc4; rmmod vc4; sleep 10 BUG: KASAN: slab-use-after-free in delayed_work_timer_fn BUG: KASAN: slab-use-after-free in drm_client_dev_hotplug [drm] Workqueue: events output_poll_execute [drm_kms_helper] Allocated by task 171: __devm_drm_dev_alloc Freed by task 262 (rmmod): drm_dev_put / component_del Use drmm_kms_helper_poll_init() so polling is finalized with the device, as other drivers do. | ||||
| CVE-2026-98308 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: trace PCM open only after assigning a stream Stream assignment can fail when hardware streams are exhausted. Move the tracepoint after the NULL check because its payload accesses the assigned stream tag. Detected by static analysis and reviewed with AI-assisted source auditing. | ||||
| CVE-2026-98307 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: cleanup arsta in ath11k_mac_peer_cleanup_all() When mac80211 removes a sta, it calls .sta_state() which in turn calls ath11k_mac_station_remove(). In that function we clean up both peers & arsta related resources. But when the firmware crashes, ath11k calls ieee80211_restart_hw(), which assumes that all driver related resources are cleaned up beforehand. This cleanup is supposedly done by ath11k_mac_peer_cleanup_all() but does not in fact free arsta->rx_stats / tx_stats. Extract the arsta cleanup from ath11k_mac_station_remove() into a new ath11k_mac_station_cleanup() and call it from both there and ath11k_mac_peer_cleanup_all(). This should handle kmemleaks reports like: unreferenced object 0xffffff801ae66400 (size 1024): comm "hostapd", pid 1306, jiffies 4295011565 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc d61c08ec): kmemleak_alloc+0x3c/0x50 __kmalloc_cache_noprof+0x2b0/0x3e0 ath11k_mac_op_sta_state+0x1dc/0xb10 drv_sta_state+0xac/0x6f8 sta_info_insert_rcu+0x314/0x5e0 sta_info_insert+0x14/0x38 ieee80211_add_station+0x10c/0x1a0 nl80211_new_station+0x3e8/0x680 genl_family_rcv_msg_doit+0xc0/0x120 genl_rcv_msg+0x1b4/0x258 netlink_rcv_skb+0x4c/0x108 genl_rcv+0x38/0x60 netlink_unicast+0x190/0x278 netlink_sendmsg+0x15c/0x370 ____sys_sendmsg+0x120/0x290 ___sys_sendmsg+0x70/0xa0 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2026-98306 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: seg6: set IPSKB_L3SLAVE from IP6SKB_L3SLAVE on IPIP decapsulation When an SRv6 packet arrives on an interface enslaved to a VRF, vrf_ip6_rcv() sets IP6SKB_L3SLAVE in IP6CB, but decap_and_validate() has never set IPSKB_L3SLAVE in IPCB. The bit stayed clear in the common case, and with CONFIG_IPV6_MIP6 the leftover frag_max_size of a reassembled outer packet could even set it, with no VRF involved. Commit 44930446dde4 ("ipv6: seg6: clear IPv4 control block on IPIP decapsulation") then made the unreliable bit reliably clear. The effect of the missing flag is visible with End.DX4 when a delivery to a local address of the node reaches the socket lookup. For example, a UDP socket bound to the enslaved ingress interface does not receive any of the decapsulated packets, while an unbound socket outside the VRF does. This contradicts Documentation/networking/vrf.rst: by default the scope of an unbound UDP or TCP socket is limited to the default VRF. Set IPSKB_L3SLAVE for IPv4 in decap_and_validate(), which already does the same for IPv6. The socket lookup then matches the decapsulated packet like any other packet received on that enslaved interface. Such a packet matches an unbound UDP or TCP socket only when udp_l3mdev_accept or tcp_l3mdev_accept is set. | ||||
| CVE-2026-98305 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: mxl862xx: disable the stats poll on teardown mxl862xx_setup() arms the stats poll before mxl862xx_setup_mdio(), and nothing stops it until dsa_register_switch() has returned an error to mxl862xx_probe(). DSA frees the dsa_port list before it returns, so a poll that fires once .setup or a later step of dsa_tree_setup() has failed walks freed ports. On shutdown the user ports stay registered, and the WORK_STOPPED flag test in mxl862xx_get_stats64() is not atomic with the cancel in mxl862xx_shutdown(), so a re-arm that read the flag before it was set queues the poll after cancel_delayed_work_sync() has returned. Arm the poll once .setup has succeeded and stop it from a .teardown op, which DSA calls on unregister and after a failed registration, in both cases before it frees the ports. Use disable_delayed_work_sync() there and in shutdown(): it drains a running poll as the cancel did and turns every later attempt to queue the work into a no-op, so the re-arm cannot bring the poll back. remove() and the probe error path only set WORK_STOPPED, which crc_err_work tests before it walks the ports. | ||||
| CVE-2026-98304 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: restore the hardware filters on open bcmgenet_hfb_init() runs INIT_LIST_HEAD() on priv->rxnfc_list, which drops every rule off the list, and bcmgenet_open() calls it on each ifup. Every rule the user configured is silently lost: # ethtool -N eth0 flow-type ether dst $MAC action 0 Added rule with ID 0 # ethtool -n eth0 | grep -c Filter: 1 # ip link set eth0 down && ip link set eth0 up # ethtool -n eth0 | grep -c Filter: 0 Initialise the lists once at probe and restore the rules on open, as bcmgenet_resume() already does. | ||||
| CVE-2026-98303 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: icmp: reject RTN_UNREACHABLE input routes in icmp_route_lookup When the forward output route cannot be used in icmp_route_lookup(), it enters the "reverse path" and calls ip_route_input() on fl4_dec.daddr, the original packet's source address. ip_route_input() only returns an error for truly invalid packets. For unreachable addresses it will succeed and return an input route whose dst.output is set to ip_rt_bug(). The existing check only rejects RTN_LOCAL routes, so the RTN_UNREACHABLE route types can still be returned and later used for output, syzkaller triggering a WARN_ON_ONCE() in ip_rt_bug() as bellow: ------------[ cut here ]------------ WARNING: net/ipv4/route.c:1273 at ip_rt_bug+0x14/0x20 RIP: 0010:ip_rt_bug+0x14/0x20 Call Trace: ip_push_pending_frames+0xfa/0x100 __icmp_send+0x905/0xf10 ip_options_compile+0xc0/0xd0 ip_rcv_finish_core+0x321/0xae0 ip_rcv+0x1de/0x260 __netif_receive_skb_one_core+0x11a/0x130 netif_receive_skb+0x7b/0x260 tun_get_user+0x11bf/0x1c10 ------------[ cut here ]------------ Reject input route that is RTN_UNREACHABLE to fix it. The net warning is only printed for RTN_LOCAL, as RTN_UNREACHABLE is not the result of a race condition. | ||||
| CVE-2026-98302 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: fddi: skfp: fix NULL deref when setting the MAC address while down skfp_ctl_set_mac_address() calls ResetAdapter() unconditionally, without checking netif_running(). ResetAdapter() first calls card_stop(), which sets smc->hw.hw_state to STOPPED, and then mac_drv_clear_tx_queue(), which walks the two transmit queues: for (i = QUEUE_S; i <= QUEUE_A0; i++) { queue = smc->hw.fp.tx[i] ; ... t = queue->tx_curr_get ; smc->hw.fp.tx[] is only populated by init_tx(), which is reached from skfp_open() through init_smt() -> init_fddi_driver() -> init_fplus() -> init_mac() -> init_tx(). The private area is allocated and zeroed by alloc_fddidev(), so on an interface that has never been brought up both queue pointers are still NULL. The hw_state test at the top of mac_drv_clear_tx_queue() does not catch this, because card_stop() has just set STOPPED; the function proceeds into the loop and dereferences NULL. ResetAdapter() does call init_smt() itself, but only after the queues have been cleared. Setting the MAC address on a down interface therefore oopses: ip link set dev fddi0 address 02:00:00:00:00:01 BUG: KASAN: null-ptr-deref in mac_drv_clear_tx_queue+0x68/0x2c0 [skfp] Read of size 8 at addr 0000000000000010 by task ip/302 Call Trace: <TASK> mac_drv_clear_tx_queue+0x68/0x2c0 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b] ResetAdapter+0x29/0x100 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b] skfp_ctl_set_mac_address+0x57/0x80 [skfp 6c01d4bab63c36978bd0a7d7e90837adb44cc37b] netif_set_mac_address+0x1e4/0x2c0 do_setlink+0x684/0x2680 </TASK> Address 0x10 is the offset of tx_curr_get, the third pointer in struct s_smt_tx_queue, on 64-bit. mac_drv_clear_rx_queue(), which ResetAdapter() calls immediately afterwards, dereferences smc->hw.fp.rx[QUEUE_R1] in the same way behind the same ineffective hw_state test; the transmit queue merely crashes first. Both are covered by the guard below. Skip the adapter reset when the interface is down. dev_addr_set() is left unconditional, so the new address is still recorded in dev->dev_addr. Nothing is lost by not resetting the adapter here: skfp_open() deliberately re-reads the factory address on every open, read_address(smc, NULL); eth_hw_addr_set(dev, smc->hw.fddi_canon_addr.a); and the comment above it states this is done to discard exactly such an address override across a close/open cycle. An address set while the interface is down could not have survived the following open even before this change, so the guard removes no working behaviour. Guarding the hardware side of ndo_set_mac_address() with netif_running() is established practice; skge_set_mac_address() has done so since commit 2eb3e621c4e0 ("skge: set mac address bonding fix"). Guarding the reset as a whole, rather than NULL-checking the queues, is also what the rest of the driver expects. After a previous open/close the queue pointers are stale but non-NULL, so there is no crash, yet ResetAdapter() goes on to call smt_online() and STI_FBI() ("Enable Board Interrupts") while skfp_close() has already called free_irq() - the adapter would be brought back online with no handler installed. The only other ResetAdapter() caller is skfp_interrupt(), which by construction runs only while the device is open. Found by automated driver testing against an emulated SysKonnect FDDI adapter under a KASAN-enabled 7.0.0 kernel. Triggering it requires CAP_NET_ADMIN. | ||||
| CVE-2026-98301 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: mst: move switchdev call outside rcu This is a follow-up of one of sashiko's pre-existing bug reports. br_mst_set_state() calls switchdev_port_attr_set() for nonzero MSTIs while holding rcu_read_lock() which invokes the blocking switchdev notifier chain and may sleep. Nonzero MSTI changes come from netlink with rtnl held. Move the switchdev call before entering the rcu section and assert that rtnl is held. The call cannot be deferred because netlink needs its error and extack. Also DSA reads the old bridge MST state during the callback and checks it. A deferred callback will be late and will see the updated state. | ||||
| CVE-2026-98300 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Don't call skb_clone_and_charge_r() for close()d listener in tcp_v6_do_rcv(). tcp_v6_do_rcv() no longer calls skb_clone_and_charge_r() for TCP_LISTEN since commit 073d89808c06 ("net: fix data-races around sk->sk_forward_alloc"). However, there is still a small race window between tcp_v6_rcv() and tcp_v6_do_rcv(), where concurrent close() changes TCP_LISTEN to TCP_CLOSE, causing skb_clone_and_charge_r() to be called locklessly and resulting in the splat below. [0] Let's avoid calling skb_clone_and_charge_r() for TCP_CLOSE as well. This is fine for non-listeners because tcp_rcv_state_process() drops skb for TCP_CLOSE and opt_skb was freed immediately anyway. [0]: sk->sk_forward_alloc WARNING: net/ipv4/af_inet.c:162 at inet_sock_destruct+0x64d/0x810 net/ipv4/af_inet.c:162, CPU#1: ksoftirqd/1/28 Modules linked in: CPU: 1 UID: 0 PID: 28 Comm: ksoftirqd/1 Not tainted 7.2.0 #17 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:inet_sock_destruct+0x64d/0x810 net/ipv4/af_inet.c:162 Code: 3d 49 ff e9 06 fd ff ff e8 d0 5b 83 f8 90 0f 0b 90 e9 35 fe ff ff e8 c2 5b 83 f8 90 0f 0b 90 e9 c5 fe ff ff e8 b4 5b 83 f8 90 <0f> 0b 90 e9 04 ff ff ff e8 a6 5b 83 f8 90 0f 0b 90 e9 65 fe ff ff RSP: 0018:ffffc90000677bb8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8880117bde80 RCX: ffffffff8957eb41 RDX: ffff88801dad5d00 RSI: ffffffff8957ec3c RDI: 0000000000000005 RBP: 00000000fffff000 R08: ffffffff8957eb41 R09: 00000000fffff000 R10: 0000000000000005 R11: 0000000000000000 R12: dffffc0000000000 R13: ffff8880117bdf10 R14: ffffffff81c08eb7 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff8880d7ae5000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f93a1021138 CR3: 00000000207a9000 CR4: 0000000000350ef0 Call Trace: <TASK> __sk_destruct+0x82/0xae0 net/core/sock.c:2356 rcu_do_batch kernel/rcu/tree.c:2645 [inline] rcu_core+0x59c/0x1100 kernel/rcu/tree.c:2897 handle_softirqs+0x1e4/0x9b0 kernel/softirq.c:622 run_ksoftirqd kernel/softirq.c:1076 [inline] run_ksoftirqd+0x38/0x60 kernel/softirq.c:1068 smpboot_thread_fn+0x458/0xc80 kernel/smpboot.c:160 kthread+0x396/0x4a0 kernel/kthread.c:436 ret_from_fork+0x8e0/0xe40 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> | ||||
| CVE-2026-98299 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: do not let tcp_rmem be set below 4096 We can hit a division by zero crash in tcp_rcvbuf_grow() and tcp_rcv_space_adjust(): divide error: 0000 [#1] PREEMPT SMP RIP: 0010:tcp_rcvbuf_grow+0x187/0x450 net/ipv4/tcp_input.c:939 ... grow = div_u64(((u64)rcvwin << 1) * (newval - oldval), oldval); The division uses oldval = tp->rcvq_space.space as divisor. When tp->rcvq_space.space is zero, this leads to a divide-by-zero exception. tp->rcvq_space.space is initialized in tcp_init_buffer_space(): tp->rcvq_space.space = min3(tp->rcv_ssthresh, tp->rcv_wnd, (u32)TCP_INIT_CWND * tp->advmss); If tcp_rmem[1] is configured to very small values (such as 1), sk->sk_rcvbuf is initialized to 1. Then tcp_full_space(sk), which computes (sk->sk_rcvbuf * scaling_ratio) >> 8, truncates to 0. This sets tp->window_clamp = 0, tp->rcv_ssthresh = 0, and tp->rcvq_space.space = 0. Later, when data arrives and DRS is invoked, tcp_rcvbuf_grow() divides by oldval == 0. Back in 2015, commit b1cb59cf2efe ("net: sysctl_net_core: check SNDBUF and RCVBUF for min length") ensured that net.core.rmem_default and net.core.rmem_max cannot be set below SOCK_MIN_RCVBUF. Similarly, SO_RCVBUF setsockopt enforces max_t(int, val * 2, SOCK_MIN_RCVBUF). However, net.ipv4.tcp_rmem still had .extra1 = SYSCTL_ONE, allowing arbitrarily small values. Because SOCK_MIN_RCVBUF depends on sizeof(struct sk_buff) and cacheline alignment, its value varies across architectures and configuration options. Using a fixed constant of 4096 ensures a predictable, architecture- independent lower bound that is safely above SOCK_MIN_RCVBUF everywhere and matches the documented 4K default. Fix this by setting tcp_rmem.extra1 to 4096 and updating the documentation. | ||||
| CVE-2026-98298 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: mmp_pdma: fix wrong sg length in mmp_pdma_prep_slave_sg() In mmp_pdma_prep_slave_sg(), for_each_sg() iterates the scatterlist putting each entry into 'sg', but the entry length is read from 'sgl' (the list head) instead of 'sg' (the current entry): for_each_sg(sgl, sg, sg_len, i) { addr = sg_dma_address(sg); avail = sg_dma_len(sgl); /* should be 'sg' */ Consequently 'avail' is always the length of the first entry. For multi-sg lists this causes out-of-bounds reads when a later entry is shorter than the first, and silent data loss when it is longer. Single-sg or uniformly-sized lists happen to mask the issue. | ||||
| CVE-2026-98297 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix queuing tx_work after workqueue is drained hci_send_acl(), hci_send_sco() and hci_send_iso() queue hdev->tx_work unconditionally. They can run from the L2CAP/SCO/ISO socket send path while hci_dev_close_sync() is draining hdev->workqueue (HCIDEVDOWN racing with a socket write). Since that queue_work() is not chained work from the tx_work worker itself, __queue_work() sees the queue marked __WQ_DRAINING, warns "cannot queue %ps on wq %s", and drops the work: WARNING: CPU: 1 PID: 5985 at kernel/workqueue.c:2352 __queue_work Call Trace: queue_work_on l2cap_chan_send l2cap_sock_sendmsg ... hci_dev_close_sync() already sets HCI_CMD_DRAIN_WORKQUEUE before draining, but only hci_cmd_work() and handle_cmd_cnt_and_timer() check it before queuing. Route the tx_work producers through the same guard via a shared hci_sched_tx() helper. | ||||
| CVE-2026-98296 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: validate TX skb length in send_sync btintel_pcie_prepare_tx() copies skb->len bytes into a fixed BTINTEL_PCIE_BUFFER_SIZE (4096) DMA slot via an unchecked memcpy. Oversized packets are currently rejected only in btintel_pcie_send_frame(); any future caller of btintel_pcie_send_sync() would silently overflow the DMA buffer. Add the bounds check in btintel_pcie_send_sync() itself, right before skb_push() and the DMA copy. | ||||
| CVE-2026-98295 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: coredump: Quiesce dump work on unregister hci_devcd_handle_pkt_init() arms dump_timeout and coredump producers queue dump_rx without holding an hdev reference. Unregister leaves both works live, so disconnecting during an active dump lets them access hdev after hci_release_dev() frees it. Shut down coredump processing during unregister. Close the producer gate under dump_q.lock before disabling both works, then free the active buffer and queued packets under hci_dev_lock. Serializing the gate with enqueue prevents controller-specific workers from adding packets after the final purge. | ||||
| CVE-2026-98294 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: Do not write to the serial port after it is closed hci_uart_close() closes the serdev port if HCI_QUIRK_NON_PERSISTENT_SETUP is set (for example, for the WCN399x family). A failed hci_dev_open_sync() following a successful qca_setup() calls hdev->close() but not hdev->shutdown(), so the port is closed while power->vregs_on is left true. qca_serdev_remove() then passes its power->vregs_on test and calls qca_power_off(), which writes to the closed port unconditionally. Seen on a WCN3988 by unbinding the driver after a controller failure. The trace below is from a 7.0.0 based kernel, where qca_power_off() was still named qca_power_shutdown(): Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038 Call trace: tty_set_termios+0x50/0x238 (P) ttyport_set_baudrate+0x84/0xc0 serdev_device_set_baudrate+0x24/0x40 qca_power_shutdown+0x158/0x1fc [hci_uart] qca_serdev_remove+0x54/0x68 [hci_uart] serdev_drv_remove+0x1c/0x2c device_remove+0x4c/0x80 device_release_driver_internal+0x1cc/0x224 device_driver_detach+0x18/0x24 unbind_store+0xb4/0xc0 Check HCI_UART_PROTO_READY, which hci_uart_close() clears in the same place it closes the port, before writing to it. The regulator disable is left unconditional so the controller is still powered down. The dangling serport->tty that turns this into a use-after-free is addressed in a separate patch. | ||||
| CVE-2026-98293 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix parent socket leak in iso_conn_ready() iso_get_sock() returns the parent socket with a reference held, which is dropped by sock_put() once the child socket has been set up. The error path taken when iso_sock_alloc() fails only calls release_sock() and returns, leaking the reference and thus the parent socket itself. Drop the reference on that path as well. | ||||
| CVE-2026-98292 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtksdio, btmtkuart: validate WMT event length before struct access btmtksdio.c and btmtkuart.c cast a received WMT event straight to struct btmtk_hci_wmt_evt and read its op/flag fields without checking the event is long enough to contain them, unlike btmtk.c. The FUNC_CTRL case then further casts to struct btmtk_hci_wmt_evt_funcc and reads its 2-byte status field, again without a length check. Firmware that sends a short or malformed WMT event makes both drivers read past the end of the received SKB. Mirror btmtk.c: validate the base WMT header with skb_pull_data() before touching any of its fields, and when a FUNC_CTRL event turns out to be the short, header-only form (a plain enable/disable ack with no status word), decode the result from the header's own flag byte instead (0 = success, otherwise failure). Verified setup on MT7920, MT7921, MT7922 and MT7925: no regression. | ||||
| CVE-2026-98291 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix off-by-one bounds check in RX submit btintel_pcie_submit_rx() used frbd_index > rxq->count to guard the FRBD array access, allowing frbd_index == rxq->count to pass through and index one element past the end of the array. Change the check to >= rxq->count so every out-of-range index is rejected. This issue was reported by Claude Mythos. | ||||
| CVE-2026-98290 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: avoid socket lock inversion in listener cleanup rfcomm_sock_cleanup_listen() closes unaccepted child sockets through rfcomm_sock_close(), which takes the child socket lock before rfcomm_dlc_close() acquires rfcomm_mutex. The RFCOMM worker takes these locks in reverse order while handling connections and DLC state changes, so lockdep reports a possible deadlock. Close dequeued children without taking their socket lock. The accept queue owns a reference to each child, and bt_accept_dequeue() locks the child while unlinking it and clearing its parent pointer. Dropping the child lock makes it important to prevent a concurrent rfcomm_connect_ind() from enqueueing a new child after cleanup observes an empty queue. Set a listening socket to BT_CLOSED while its lock is still held, before dropping the lock and draining the queue. The state check in rfcomm_connect_ind() then rejects new children once cleanup starts. | ||||