Export limit exceeded: 10232 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10232 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72129 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: handle inline data with a nonzero offset nvmet_rdma_use_inline_sg() maps the host-controlled inline data offset into the per-command inline scatterlist. The bounds check admits any offset with off + len <= inline_data_size, but the mapping still assumes the data begins in the first inline page: sg->offset = off; sg->length = min_t(int, len, PAGE_SIZE - off); When a port is configured with inline_data_size > PAGE_SIZE (settable up to max(SZ_16K, PAGE_SIZE)), an offset in (PAGE_SIZE, inline_data_size] makes "PAGE_SIZE - off" underflow, so sg->length is set to ~4 GiB and the block backend reads far past the first inline page. num_pages(len) also ignores the offset, so an in-bounds offset whose [off, off+len) span crosses a page boundary under-counts the scatterlist. Map the offset properly: split it into a page index and an in-page offset, start the scatterlist at that page, and size the page count from page_off + len. Because the request scatterlist may now start at inline_sg[page_idx] rather than inline_sg[0], generalize the inline-SGL identity test in nvmet_rdma_release_rsp() to a range test; otherwise the persistent inline scatterlist is mistaken for an allocated one and nvmet_req_free_sgls() frees an inline page (and warns in free_large_kmalloc()). | ||||
| CVE-2026-72033 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: orangefs: keep the readdir entry size 64-bit in fill_from_part() fill_from_part() computes the size of a directory entry in size_t but stores it in a __u32. An entry length near U32_MAX wraps it to a small value, bypasses the bounds check, and is then used to index the entry, reading far past the directory part -- an out-of-bounds read that oopses the kernel. Compute the size as a u64 so it cannot truncate; the bounds check then rejects the entry. The trailer is supplied by the userspace client. | ||||
| CVE-2026-74399 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: evm: terminate and bound the evm_xattrs read buffer evm_read_xattrs() allocates size + 1 bytes, fills them from the list of enabled xattrs, and then passes strlen(temp) to simple_read_from_buffer(). When no configured xattrs are enabled, the fill loop stores nothing and temp[0] remains uninitialized, so strlen() reads beyond initialized memory. Explicitly terminate the buffer after allocation, use snprintf() for each formatted line, and pass the accumulated length, without risk of truncation, to simple_read_from_buffer(). | ||||
| CVE-2026-72396 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: adm1275: Prevent reading uninitialized stack While adding support for the ROHM BD127X0 hot-swap controllers, sashiko reported an error in device-name comparison, which can lead to reading uninitialized stack memory. Quoting Sashiko: This is a pre-existing issue, but I noticed that just before this block in adm1275_probe(), there might be an out-of-bounds stack read: ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer); if (ret < 0) { ... } for (mid = adm1275_id; mid->name[0]; mid++) { if (!strncasecmp(mid->name, block_buffer, strlen(mid->name))) break; } Since i2c_smbus_read_block_data() reads up to 32 bytes into the uninitialized stack array block_buffer without appending a null terminator, strncasecmp() could read past the valid bytes returned in ret. For example, if the device returns a shorter string like "adm12", checking it against "adm1275" up to the length of "adm1275" will continue reading into uninitialized stack bounds. Prevent reading uninitialized memory by zeroing the stack array. | ||||
| CVE-2026-72241 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: leds: uleds: Fix potential buffer overread The name string supplied by userspace is not guaranteed to be null-terminated, so using strchr() on it might result in a buffer overread. The same thing will happen when said string is used by the LED class device. Fix this by using strnchr() instead and explicitly check that the name string is properly null-terminated. | ||||
| CVE-2026-72236 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/perf_cpum_cf: Add missing array_index_nospec() to __hw_perf_event_init() ev variable is userspace controlled via event->attr.config and used as an array index after bounds checking, but without speculation barriers. Add the missing array_index_nospec() call to prevent speculative execution. | ||||
| CVE-2026-72159 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject non-inline dinodes with i_size and zero i_clusters On a volume mounted without OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC, a non-inline regular file with non-zero i_size and zero i_clusters is structurally malformed: the extent map declares no allocated clusters yet the size header claims content exists. Keep rejecting that shape, but express it through a shared predicate so the same invariant is available to normal inode reads and online filecheck. The same zero-cluster shape is also malformed for non-inline directories. ocfs2 directory growth allocates backing storage before advancing i_size, and ocfs2_dir_foreach_blk_el() later walks until ctx->pos reaches i_size_read(inode). A forged directory dinode with a huge i_size and no clusters would repeatedly fail on holes while advancing through the claimed size. Sparse regular files remain exempt: on sparse-alloc volumes, truncate can legitimately grow i_size without allocating clusters. System inodes and inline-data dinodes also retain their separate storage rules. Mirror the check in ocfs2_filecheck_validate_inode_block() as well. filecheck reports through its own error namespace, so malformed size/cluster state is logged as a filecheck invalid-inode result rather than via ocfs2_error(), but it must not proceed into ocfs2_populate_inode(). | ||||
| CVE-2026-72156 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header() mpf_ops_parse_header() reads header_size from the bitstream at MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression *(buf + header_size - 1) reads one byte before the buffer start. Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET. The only real gap is the zero header_size case, which cannot be resolved by providing a larger buffer, so return -EINVAL. | ||||
| CVE-2026-72446 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: qcom: reject stream disable with no active interface handle_uaudio_stream_req() resolves an interface index with info_idx_from_ifnum(), which returns -EINVAL when no interface matches. The enable branch and the response: cleanup label both guard against a negative index, but the disable branch does not: it forms info = &uadev[pcm_card_num].info[info_idx] and dereferences it. uadev[].info is a pointer allocated only when a stream is first enabled, so a negative info_idx on the disable path is unsafe in two ways: - If the card was never enabled, .info is NULL and &info[-EINVAL] is a wild pointer; reading info->data_ep_pipe faults (kernel oops). - If the card was enabled at least once (.info allocated) and the disable names an interface that does not match, &info[-EINVAL] points before the allocation; info->data_ep_pipe / info->sync_ep_pipe are an out-of-bounds slab read and, when non-zero, an out-of-bounds 4-byte write (both pipe fields are cleared to 0). That is memory corruption, not just a NULL dereference. The request is reachable from unprivileged local userspace over AF_QIPCRTR. Reject a disable request with no resolved interface, matching the guard the enable path already has. | ||||
| CVE-2026-19955 | 1 Traildb | 1 Traildb | 2026-08-16 | 3.5 Low |
| A vulnerability was detected in TrailDB 0.6. Impacted is the function tdb_open of the file /src/tdb.c of the component TOC Validation. The manipulation results in out-of-bounds read. It is possible to launch the attack remotely. The exploit is now public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-74324 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: validate skb length in testmode query In mt7925_tm_query(), the response skb from mt76_mcu_send_and_get_msg() is used in a memcpy without validating its length: memcpy(evt_resp, skb->data + 8, MT7925_EVT_RSP_LEN); where MT7925_EVT_RSP_LEN is 512. If the firmware returns a response shorter than 520 bytes (8 + 512), this reads beyond the skb data buffer. The over-read data is then returned to userspace via nla_put() in mt7925_testmode_dump(). Add a length check before the memcpy to ensure the skb contains sufficient data. | ||||
| CVE-2026-74336 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: bound S1G TIM PVB walk to the TIM element ieee80211_s1g_check_tim() parses the S1G Partial Virtual Bitmap (PVB) of a received TIM element. The TIM is handed in as the element payload: ieee802_11_parse_elems_full() stores elems->tim = elem->data and elems->tim_len = elem->datalen (net/mac80211/parse.c), so the valid bytes are [tim, tim + tim_len). When walking the encoded blocks the function passes the walker an end sentinel of (const u8 *)tim + tim_len + 2, i.e. two bytes past the end of the element. ieee80211_s1g_find_target_block() loops while (ptr + 1 <= end) and dereferences ptr (and the per-mode ieee80211_s1g_len_*() helpers read *ptr), so it can read up to two bytes beyond the TIM element -- an out-of-bounds read of adjacent skb/heap data when the TIM is the last element in the frame. The +2 appears to account for the element id/len header, but tim already points past that header at the element payload, so the addend is wrong. Pass the correct element end, (const u8 *)tim + tim_len. | ||||
| CVE-2026-74532 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: Validate length before parsing diagnostics TLV btintel_diagnostics() accesses tlv->val[0] without first validating that the diagnostics VSE is long enough to contain that field, so may cause reading data beyond the received frame. Fix by validating the length before access. | ||||
| CVE-2026-58429 | 1 Gitea | 1 Gitea Open Source Git Server | 2026-08-14 | 4.9 Medium |
| Public-Only Personal access tokens scope bypass in Organization and Permission Endpoints | ||||
| CVE-2026-19654 | 1 Redhat | 1 Enterprise Linux | 2026-08-14 | 7.5 High |
| A unauthenticated remote peer may lead rsyslogd to crash due to a flaw in the optional imptcp module. A crafted input sequence during oversize-frame recovery can cause an invalid internal message length and terminate rsyslogd. No confidentiality or integrity impact, privilege escalation, or code execution has been identified. imtcp and the default imptcp framing modes are not affected. | ||||
| CVE-2026-64909 | 1 Microsoft | 9 365 Apps, Microsoft 365, Office 2016 and 6 more | 2026-08-14 | 7.8 High |
| Integer underflow (wrap or wraparound) in Microsoft Office allows an unauthorized attacker to execute code locally. | ||||
| CVE-2026-66809 | 1 Microsoft | 10 365 Apps, Microsoft 365, Office 2019 and 7 more | 2026-08-14 | 5.5 Medium |
| Out-of-bounds read in Microsoft Office allows an unauthorized attacker to disclose information locally. | ||||
| CVE-2026-63521 | 1 Microsoft | 6 365 Apps, Office 2019, Office 2021 and 3 more | 2026-08-14 | 5.5 Medium |
| Out-of-bounds read in Microsoft Office Word allows an unauthorized attacker to disclose information locally. | ||||
| CVE-2026-63515 | 1 Microsoft | 9 365 Apps, Microsoft 365, Office 2016 and 6 more | 2026-08-14 | 7.8 High |
| Out-of-bounds read in Microsoft Office allows an unauthorized attacker to execute code locally. | ||||
| CVE-2026-73515 | 1 Postgis | 1 Postgis | 2026-08-14 | 8.1 High |
| PostGIS before 3.7.0beta2 contains an out-of-bounds read vulnerability that allows attackers to cause memory disclosure or a server crash by supplying a malformed FlatGeobuf buffer. The FlatGeobuf property metadata decoder verifies that a string length field is present but fails to verify that the subsequent string body is contained within the supplied buffer before materializing it into a SQL-visible value, enabling memory disclosure or denial of service. | ||||