Export limit exceeded: 16697 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16697 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98096 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: restore network header before routing and forwarding ipv6_srh_rcv() runs with skb->data at the Segment Routing Header (SRH) while skb_network_header() points at the IPv6 header. When segments_left > 0, ipv6_srh_rcv() previously restored the skb->data position by pushing sizeof(struct ipv6hdr), assuming the SRH immediately followed the fixed IPv6 header. If another extension header (such as a Hop-by-Hop options header) precedes the SRH, skb_network_offset() remained negative. This led to two problems: 1. During ip6_route_input(), fib6_rules_early_flow_dissect() invokes __skb_flow_dissect() which passes the negative skb_network_offset() to flow dissection, breaking BPF and C flow dissector logic. 2. If forwarded via ip6_forward() or redirected via act_mirred, downstream handlers (like sch_fragment() or neighbour output) pass the negative offset as an unsigned length, triggering OOB memcpy or buffer overflows. Fix this by pushing -skb_network_offset(skb) before routing, ensuring skb_network_offset(skb) is 0 for route lookup / flow dissection as well as downstream forwarding. On the loopback path, pull skb_transport_offset(skb) to restore skb->data to the SRH before looping back. | ||||
| CVE-2026-98078 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: fix reversed sequence option serialization hton_seq() expects the host-order source first and the unaligned network-order destination second. The version 1 sync sender passes these arguments in reverse for both sequence blocks. This leaves 24 bytes of the kmalloc-backed message unwritten. It may disclose stale heap data and replace the live connection sequence state with values read from the buffer. Pass the connection sequence state as the source and the message payload as the destination for both blocks. | ||||
| CVE-2026-97995 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virtio_console: do not free control-out buffers on remove __send_control_msg() publishes &portdev->cpkt as the control-out virtqueue cookie. remove_vqs() walks every virtqueue and passes leftover cookies to free_buf(), which treats them as struct port_buffer and reads sgpages. If a control message is still on c_ovq when the device is unbound, free_buf() reads past the ports_device object. KASAN reported slab-out-of-bounds in free_buf(): free_buf remove_vqs virtcons_remove unbind_store The object was the ports_device allocated in virtcons_probe(). Drain c_ovq without freeing. The packet lives in portdev and is released with it. | ||||
| CVE-2026-97991 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vdpa_sim_blk: reject out-of-range sector starts vdpasim_blk_check_range() logs an invalid start sector but continues validating the request. The subsequent unsigned capacity subtraction can underflow and let an out-of-range buffer offset reach the data path. The invalid offset is used by three request paths. VIRTIO_BLK_T_OUT copies guest data to blk->buffer + offset through vringh_iov_pull_iotlb(), causing an out-of-bounds write in _copy_from_iter() or memcpy(). VIRTIO_BLK_T_IN copies from blk->buffer + offset to the guest through vringh_iov_push_iotlb(), causing an out-of-bounds read in _copy_to_iter(). VIRTIO_BLK_T_WRITE_ZEROES passes blk->buffer + offset to memset(), causing an out-of-bounds write. Reject starts at or beyond the capacity before the subtraction. Treat the capacity boundary as invalid because the IN and OUT paths round byte counts down to sectors for validation but later copy the original byte counts. A sub-sector request at the capacity boundary would otherwise still access past the end of the buffer. I found this bug myself, though the patch was written with AI assistance. | ||||
| CVE-2026-97957 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: hinic: fix mailbox segment buffer overflow check_mbox_seq_id_and_seg_len() validates that seq_id does not exceed SEQ_ID_MAX_VAL (42) and seg_len does not exceed MBOX_SEG_LEN (48). However, this allows the last segment (seq_id=42) to carry a full 48-byte payload, writing to offset 42*48=2016 for 48 bytes (ending at byte 2064). The receive buffer is only MBOX_MAX_BUF_SZ (2048) bytes, resulting in a 16-byte heap buffer overflow. The hinic3 driver already handles this correctly by defining MBOX_LAST_SEG_MAX_LEN and rejecting the last segment when it exceeds the remaining buffer space. Apply the same fix to the hinic driver. | ||||
| CVE-2026-97910 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: sprd: validate compress buffer sizes against fixed allocations sprd_platform_compr_open() allocates the stage 0 IRAM buffer (32K data area) and the stage 1 DDR buffer (2M data area) with fixed sizes, but sprd_platform_compr_copy() derives all copy lengths from the user controlled runtime->fragment_size and the write() count, never comparing them against the physical buffer sizes. The compress core only checks fragment_size * fragments for an u32 overflow in snd_compress_check_input(), so a local user can configure a logical buffer of up to ~4GB via SNDRV_COMPRESS_SET_PARAMS, far exceeding the fixed allocations. A fragment_size larger than the 32K IRAM data area makes the stage 0 copy_from_user() overflow past the IRAM allocation, and a buffer_size larger than the 2M DDR buffer makes the wrapping copy at the end of sprd_platform_compr_copy() write fully user controlled data past the buffer. No SNDRV_PCM_TRIGGER_START is needed, a write() in SETUP state reaches the copy callback directly. Reject parameters that do not fit into the fixed buffers in set_params(), and fix the advertised max fragment size: 128K never fitted into the 32K IRAM buffer. The caps values may have been carried over from the qdsp6 driver, which allocates its buffers according to the advertised maxima, unlike this driver. With 32K as max fragment size the advertised limits are self-consistent: 32K * 64 = 2M equals the DDR buffer size. Discovered by Atuin - Automated Vulnerability Discovery Engine. | ||||
| CVE-2026-97615 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: use option bits for CFM/MRP frame handlers CFM and MRP register a global br_frame_type whose hlist_node is linked into the per-bridge frame_type_list when the first MEP/MRP instance is created. Enabling the protocol on multiple bridges therefore inserts the same node into multiple lists. Unregistering it on one bridge then corrupts list state belonging to another. These handlers can only be installed once per bridge, and they are uncommon. Track their per-bridge enable state with net_bridge option bits, which already live on the Rx hot cache line, and dispatch the matching handler directly from the receive path. Check both bits together first as an unlikely case. Remove the generic frame_type_list and br_frame_type helpers, which have had no other users since CFM and MRP were added. That shrinks struct net_bridge by 8 bytes and drops the list walk from the fast path. When neither protocol is compiled in, BR_CFM_MRP_OPTS is 0 and the compiler prunes the branch. | ||||
| CVE-2026-97579 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: bound AV1 tile-start copy to the array capacity vdec_av1_slice_setup_tile() copies tile_cols + 1 / tile_rows + 1 entries into mi_col_starts[] / mi_row_starts[] from the bitstream tile_info. Bound the copy to the array capacity. | ||||
| CVE-2026-97578 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: rockchip: guard VPU981 AV1 divisor and tile buffer rockchip_vpu981_av1_dec_set_tile_info() divides context_update_tile_id by tile_info->tile_cols and writes one descriptor per tile into the tile_info DMA buffer, which holds AV1_MAX_TILES entries; tile_cols and tile_rows come from the bitstream. Guard the division against a zero tile_cols by initialising the context-update values to zero and computing them only when tile_cols is non-zero, and stop the descriptor writes once the tile_info buffer is full. The tile geometry written to the hardware registers is left unmodified; the per-dimension and total tile bounds are enforced by the control validation. | ||||
| CVE-2026-97517 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: reject beacons with bad HE operation The HE operation element not only needs to be longer than the fixed part, but also have an appropriate size for the variable part inside of it. Check this. | ||||
| CVE-2026-97487 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jfs: handle set_blocksize failures jfs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call. | ||||
| CVE-2026-97485 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: omfs: handle set_blocksize failures omfs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call. | ||||
| CVE-2026-97454 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: add boundary checks in acpi_ps_get_next_field() Add boundary checks in acpi_ps_get_next_field() to prevent out-of-bounds access. | ||||
| CVE-2026-97449 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Add package limit checks in parser functions Add package limit checks in parser functions to prevent out-of-bounds access. | ||||
| CVE-2026-97445 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Enhance buffer validation in acpi_ut_walk_aml_resources() Enhance buffer validation in acpi_ut_walk_aml_resources() to prevent buffer overflows. | ||||
| CVE-2026-97425 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix buffer overflow during vBIOS update Clamp the buffer postion to write by setting the bin attribute to the maximum buffer size so that VFS layer will block the out-of-bounds accessing. | ||||
| CVE-2026-93792 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix a possible underflow We shouldn't trust the firmware about the length of the wowlan packet. | ||||
| CVE-2026-89838 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: limit recovery filename logging to stored length F2FS stores recovery filenames as a length plus a fixed-size i_name buffer. The buffer is not NUL-terminated, but recover_inode() and recover_dentry() print it with %s. For a 255-byte filename, recovery logging can read past i_name into the following raw inode fields. Print the name with a precision bounded by i_namelen and F2FS_NAME_LEN. | ||||
| CVE-2026-74294 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: meson: aiu: Validate written enum values The AIU HDMI and internal codec mux put callbacks use the written enum value with snd_soc_enum_item_to_val() before checking whether the value is valid for the enumeration. Reject out-of-range values before converting the enum item, matching the validation already done by the G12A HDMI and internal codec mux controls. | ||||
| CVE-2026-72402 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mask pseudo pointer values in verifier logs print_bpf_insn() masks ldimm64 immediates for pointer-bearing pseudo sources when pointer leaks are not allowed, but the mask only covers BPF_PSEUDO_MAP_FD and BPF_PSEUDO_MAP_VALUE. BPF_PSEUDO_MAP_IDX, BPF_PSEUDO_MAP_IDX_VALUE, and BPF_PSEUDO_BTF_ID can also be resolved to kernel pointer values before the verifier log prints the instruction. Include them in the existing pointer classification so the log prints 0x0 instead of the rewritten address. | ||||