Export limit exceeded: 13319 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (13319 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64138 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate SID in parent security descriptor during ACL inheritance Introduce smb_validate_ntsd_sid() helper to safely validate Owner SID and Group SID inside the NT Security Descriptor (smb_ntsd) retrieved from the parent directory. | ||||
| CVE-2026-72096 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-verity: make error counter atomic The error counter "v->corrupted_errs" was not atomic, thus it could be subject to race conditions. The call to dm_audit_log_target("max-corrupted-errors") may be skipped due to the races. | ||||
| CVE-2026-72247 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: fix zone comparison in tuple dedup The "already exists" dedup logic in __nf_conncount_add() decides whether a connection has already been counted and can be skipped instead of incrementing the connlimit count. It compares the conntrack zone of a list entry with the zone of the connection being added using nf_ct_zone_id() and nf_ct_zone_equal(), passing conn->zone.dir or zone->dir as the direction argument. Those helpers take enum ip_conntrack_dir values: IP_CT_DIR_ORIGINAL is 0 and IP_CT_DIR_REPLY is 1. However, zone->dir is a u8 bitmask: NF_CT_ZONE_DIR_ORIG is 1, NF_CT_ZONE_DIR_REPL is 2 and NF_CT_DEFAULT_ZONE_DIR is 3. Passing that bitmask as the enum direction shifts the meaning of every non-zero value. An ORIG-only zone passes 1 and is tested as REPLY, while REPL-only and default zones pass 2 or 3 and test bits beyond the valid direction range. In those cases nf_ct_zone_id() can fall back to NF_CT_DEFAULT_ZONE_ID instead of using the real zone id, so different zones can be treated as equal and dedup collapses to tuple equality alone. nf_conncount stores and compares the original-direction tuple for a connection. If an skb already has an attached conntrack entry, get_ct_or_tuple_from_skb() explicitly copies ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple, regardless of the packet's ctinfo. Therefore the zone comparison in the tuple dedup path must use IP_CT_DIR_ORIGINAL as well; the zone direction bitmask describes where a zone id applies, not which direction this conncount tuple represents. Fix the two dedup comparisons by passing IP_CT_DIR_ORIGINAL directly. Do not special-case NF_CT_DEFAULT_ZONE_DIR and do not compare raw zone ids: using the existing helpers with IP_CT_DIR_ORIGINAL preserves the direction-aware NF_CT_DEFAULT_ZONE_ID fallback. A default bidirectional zone contains the ORIG bit, so it naturally returns the real zone id; reply-only zones continue to fall back for original-direction tuple comparisons. | ||||
| CVE-2026-73644 | 1 Openidentityplatform | 1 Opendj | 2026-08-18 | 9.6 Critical |
| OpenDJ is an LDAPv3 compliant directory service. Prior to 5.1.2, the SASL PLAIN authorization identity path in opendj-server-legacy/src/main/java/org/opends/server/extensions/PlainSASLMechanismHandler.java checked the PROXIED_AUTH privilege but did not evaluate the mayProxy proxy ACI scope when an authzid resolved to a different user. Both dn: and u: or bare authzid forms could therefore let an authenticated account holding PROXIED_AUTH assume any resolvable non-root identity outside the identities permitted by its proxy ACI. The fix returns INVALID_CREDENTIALS (49) before password verification when the target authorization identity is not permitted. This issue is fixed in version 5.1.2. | ||||
| CVE-2026-73566 | 1 Isaacs | 1 Tar | 2026-08-18 | 7.5 High |
| node-tar is a tar archive manipulation library for Node.js. Prior to 7.5.21, node-tar's filesFilter in src/list.ts uses the recursive mapHas helper to walk an archive entry path upward with path.dirname() and no segment cap when tar.t(...) or tar.x(...) receives a non-empty member-selection list. A crafted GNU L or PAX x long-path header with thousands of slash-separated segments reaches this.filter(entry.path, entry) in Parser[CONSUMEHEADER] in src/parse.ts before Unpack[CHECKPATH] applies maxDepth, causing an uncatchable RangeError stack overflow that terminates asynchronous and streaming Node.js consumers. This issue is fixed in version 7.5.21. | ||||
| CVE-2026-73421 | 1 Nextauth.js | 1 Next-auth | 2026-08-18 | N/A |
| NextAuth.js provides authentication for Next.js. From next-auth 5.0.0-beta.0 until 5.0.0-beta.32, applications that gate access by checking only for the existence of the auth object returned by the auth() wrapper can fail open when Auth.js has a server configuration error. In middleware, Route Handlers, React Server Components, and other auth() entry points, a non-OK session response is parsed into a truthy error object instead of null, so checks such as !!auth and if (req.auth) evaluate to true for unauthenticated requests. A provider missing both the issuer and authorization endpoint triggers InvalidEndpoints, and an unset AUTH_SECRET or another server configuration error can produce the same behavior. There is no impact while configuration is valid, but after a deployment becomes misconfigured, routes protected only by session existence silently grant access to every visitor. This issue is fixed in next-auth 5.0.0-beta.32. | ||||
| CVE-2026-72741 | 1 Goodrain | 1 Rainbond | 2026-08-18 | 8.1 High |
| Rainbond through 6.9.7 contains a broken access control vulnerability in the CheckToken function that allows authenticated attackers to access unauthorized enterprise resources by substituting another enterprise's tenant name in URL paths. Attackers can use any valid API token to bypass enterprise ID verification and access or modify another enterprise's services, plugins, environment variables, and certificates. | ||||
| CVE-2026-19834 | 1 Webkul | 1 Bagisto | 2026-08-18 | 4.7 Medium |
| A vulnerability was determined in Webkul Bagisto up to 2.4.4. Affected is an unknown function of the file /admin/customers/login-as-customer/ of the component Admin Customer Impersonation Feature. This manipulation of the argument ID causes authorization bypass. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor confirms: "The reported issues were already identified through our internal security assessment process prior to this notification and are being handled through our established internal security and development lifecycle. Some of these items have already been addressed, while the remaining items are planned for resolution in upcoming product releases." | ||||
| CVE-2026-64721 | 1 Apple | 7 Ios And Ipados, Ipados, Iphone Os and 4 more | 2026-08-17 | 5.5 Medium |
| This issue was addressed through improved state management. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. An app may be able to access sensitive user data. | ||||
| CVE-2026-63669 | 2026-08-17 | 6.5 Medium | ||
| ApostropheCMS is an open-source Node.js content management system. Prior to 4.32.0, the page module's move() operation fails to enforce the destination parent's _create permission because its oldParent archive condition disables the check for ordinary moves, allowing an authenticated editor or contributor to use _targetId and _position through the page REST update endpoint to move a controlled page into a restricted subtree and make nudgeNewPeers() updateMany re-rank protected sibling pages. This issue is fixed in version 4.32.0. | ||||
| CVE-2026-71858 | 2026-08-17 | N/A | ||
| Notepad++ is a free and open-source source code editor. Prior to 8.9.7, macros loaded from an attacker-controlled shortcuts.xml bypass the HMAC validation applied to UserDefinedCommands and can invoke Scintilla actions and the internal Open in Default Viewer command in an elevated Notepad++ process, allowing protected file modification and conditional elevated command execution when a local attacker influences settingsDir and a user triggers the macro. This issue is fixed in version 8.9.7. | ||||
| CVE-2026-17079 | 1 Ibm | 1 Db2 Mirror For I | 2026-08-17 | 6.3 Medium |
| IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote authenticated attacker to bypass security restrictions due to the ability to disable server-side input validation via a request parameter. | ||||
| CVE-2026-15689 | 1 Abeverley | 1 Dancer2::plugin::auth::extensible | 2026-08-17 | 9.8 Critical |
| Dancer2::Plugin::Auth::Extensible versions through 0.713 for Perl allow password reset link poisoning via the request Host header in _default_email_password_reset and _default_welcome_send. Both default emails emit a link of the form `$base/login/$code`, whose authority comes from the request Host header, or from X-Forwarded-Host under behind_proxy (obtained from Dancer2's request->base function). A POST to /login carrying submit_reset and a username needs no authentication: it stores a fresh reset code against that account and mails the account holder a link to a host of the sender's choosing. The welcome mail takes the same path when the application calls create_user with email_welcome set. Through 0.711 the handlers read `request->uri_base` and `request->base` directly; Versions 0.712 and later provide an uri_base configuration key that defaults to the untrusted `request->uri_base` when unset. The default configuration with reset_password_handler enabled and the default message text, a recipient who follows the link hands a working reset code to the sender's host, which is enough to take over the account. | ||||
| CVE-2026-72090 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Use caller client for debug BO sync amdxdna_drm_sync_bo_ioctl() looks up args->handle in the ioctl caller's drm_file. For SYNC_DIRECT_FROM_DEVICE, it then calls amdxdna_hwctx_sync_debug_bo(), but passes abo->client. amdxdna_hwctx_sync_debug_bo() uses the passed client both as the handle namespace for debug_bo_hdl and as the owner of the hardware context xarray. Those must match the file that supplied args->handle. The BO's stored client pointer is object state, not the ioctl context. Pass filp->driver_priv instead, matching the original handle lookup. | ||||
| CVE-2026-72315 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix busy dentry warning on unmount after DIO Commit c68337442f03 ("cifs: Fix busy dentry used after unmounting") fixed the issue in cifs where deferred close of a file led to a dentry reference count not being released in umount, by flushing deferredclose_wq in cifs_kill_sb() to solve it. However, the cifs DIO path suffers from the same busy-dentry problem caused by a delayed dentry reference-count release: [dio] [cifsd] [close + umount] netfs_unbuffered_write_iter_locked ... cifs_demultiplex_thread netfs_unbuffered_write cifs_issue_write netfs_wait_for_in_progress_stream [1] ... netfs_write_subrequest_terminated netfs_subreq_clear_in_progress netfs_wake_collector // wake [1] netfs_put_subrequest netfs_put_request queue_work(system_dfl_wq, xxx) [2] // dio write return cifs_close _cifsFileInfo_put // cfile->count 2->1 --cfile->count [3] // umount cifs_kill_sb kill_anon_super // warning triggered! shrink_dcache_for_umount [4] [system_dfl_wq] [5] netfs_free_request ... _cifsFileInfo_put // cfile->count 1->0 --cfile->count queue_work(fileinfo_put_wq, xxx) [fileinfo_put_wq] [6] cifsFileInfo_put_work cifsFileInfo_put_final dput If the umount path is triggered before [5], it results warning: BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1) [unmount of cifs cifs] The existing per-inode ictx->io_count wait in cifs_evict_inode() does not help: it lives in the inode eviction path, which runs after shrink_dcache_for_umount() has already warned about the busy dentries. Fix it by adding a per-superblock outstanding-rreq counter that is incremented in cifs_init_request() and decremented in cifs_free_request(). In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach 0 - which guarantees that all cleanup_work for this sb have run and thus all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq. Then drain the workqueue so the dentry refs are dropped. This is a targeted wait, not a flush of the system-wide system_dfl_wq. | ||||
| CVE-2026-75105 | 1 Phpipam | 1 Phpipam | 2026-08-17 | 7.5 High |
| phpIPAM through 1.8.1 fails to verify that a requested IP address belongs to the subnet a temporary share token was issued for. In app/temp_share/index.php and app/temp_share/address.php, when the share type is 'subnets', the subnetId parameter is used directly as a database primary key to fetch an address without confirming the address belongs to the authorized subnet. An unauthenticated party holding any valid, non-expired temporary share URL can enumerate the subnetId parameter to read every IP address record across all sections and subnets, including hostnames, DNS names, MAC addresses, owner/contact fields, and notes (which may contain credentials and configuration details). | ||||
| CVE-2026-50029 | 1 Sunnyadn | 1 Js-toml | 2026-08-17 | 5.3 Medium |
| js-toml is a TOML parser for JavaScript, Prior to version 1.1.2, the interpreter checks whether a key already exists in a parser-built container with `if (object[key])` instead of `if (key in object)`. When the prior value is a falsy primitive — `false`, `0`, `0n`, `0.0`, `-0`, or `""` — the duplicate-key branch is skipped and the value is silently overwritten by a later sub-table, dotted-key sub-table, or array-of-tables sharing the same name. Per the TOML 1.0.0 spec ("Defining a key multiple times is invalid"; "You cannot define any key or table more than once"), this should be a parse error. The result is structural type confusion of attacker-named keys in the value returned by `load()`. A boolean-typed `false` (or numeric `0`) becomes a truthy object. Host applications that gate behavior on `if (config.flag)`, `if (!user.banned)`, `if (config.allowDelete)`, or `if (config.publicMode)` will silently take the truthy branch. This is distinct from GHSA-65fc-cr5f-v7r2 (the 1.0.2 prototype-pollution fix). `Object.prototype` is not polluted. The `Object.create(null)` mitigation from 1.0.2 is intact; the bug here is in the duplicate-key state machine, not in container construction. Version 1.1.2 patches the incorrect comparison. | ||||
| CVE-2026-18549 | 1 Fastify | 1 Fastify-multipart | 2026-08-17 | 7.5 High |
| @fastify/multipart is a multipart form-data parser for Fastify. In versions from 5.3.0 up to but not including 10.1.1, when the busboy fileSize limit truncates a file part, the plugin clears its internal current-file reference while the underlying stream is still open. If the client then aborts the connection before sending the terminating boundary, the abort cleanup finds no stream to destroy, so saveRequestFiles() never settles, the request handler hangs, and the temporary file already written to disk is never cleaned up. An unauthenticated client can repeat this to permanently leak temporary files and suspended handler executions, leading to disk and event-loop exhaustion. The issue is fixed in @fastify/multipart 10.1.1. Users should upgrade to 10.1.1. | ||||
| CVE-2026-13358 | 2 Croixhaug, Wordpress | 2 Simply Schedule Appointments, Wordpress | 2026-08-17 | 6.5 Medium |
| The Appointment Booking Calendar — Simply Schedule Appointments Booking Plugin plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 1.6.12.10 via the ssa_past_appointments due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with contributor-level access and above, to access appointment records belonging to arbitrary users and harvest the per-appointment ownership tokens (32-character hashes) embedded in the rendered HTML, which can then be used without any authentication to read or modify those appointments including full customer PII such as name, email, phone number, and private notes. The /wp-json/ssa/v1/render-shortcode REST endpoint is registered unconditionally on rest_api_init regardless of whether the Divi theme is installed, and its permission callback only requires current_user_can('edit_posts'), meaning any Contributor-level account is sufficient to trigger this entire exploit chain. | ||||
| CVE-2025-10005 | 2 Buildwps, Wordpress | 2 Ppwp – Password Protect Pages, Wordpress | 2026-08-17 | 4.3 Medium |
| The PPWP – Password Protect WordPress | #1 Most-Reviewed Password Plugin plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 1.9.20 via the ppw_free_set_password AJAX action due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with Contributor-level access and above, to update the password on any password protected post and subsequently access the content. | ||||