Export limit exceeded: 22496 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22496 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72376 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix misplaced inc of net->cells_outstanding Fix net->cells_outstanding being incremented before the check for failure of idr_alloc_cyclic(), leaving the count incremented on error. | ||||
| CVE-2026-72418 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: prevent connlimit drops for early confirmed ct Commit 69894e5b4c5e ("netfilter: nft_connlimit: update the count if add was skipped") introduced a regression where packets for valid connections are dropped when using connlimit for soft-limiting scenarios. The issue occurs when a new connection reuses a socket currently in the TIME_WAIT state. In this scenario, the connection tracking entry is evaluated as already confirmed. Previously, __nf_conncount_add() assumed that if a connection was confirmed and did not originate from the loopback interface, it should skip the addition and return -EEXIST. Skipping the addition triggers a garbage collection run that cleans up the TIME_WAIT connection. Consequently, the active connection count drops to 0, which xt_connlimit mishandles, leading to the false rejection of the perfectly valid new connection. Fix this by replacing the interface check with protocol-agnostic state checks. We now skip the tree insertion and preserve the lockless garbage collection optimization only if the connection is IPS_ASSURED. This allows early-confirmed setup packets (such as reused TIME_WAIT sockets or locally generated SYN-ACKs) to be properly evaluated and counted without falsely dropping. The goto check_connections path is maintained to ensure these setup packets are deduplicated correctly. This has been tested with slowhttptest and HTTP server configured locally to ensure we are not breaking soft-limiting scenarios for local or external connections. In addition, it was tested with a OVS zone limit too. | ||||
| CVE-2026-4433 | 2 Linux, Tenable | 3 Linux Kernel, Operational Technology Exposure, Tenable Operation Technology | 2026-08-18 | 4.3 Medium |
| An SSH misconfigurations exists in Tenable OT that led to the potential exfiltration of socket, port, and service information via the ostunnel user and GatewayPorts. This could be used to potentially glean information about the underlying system and give an attacker information that could be used to attempt to compromise the host. | ||||
| CVE-2026-13476 | 7 Canonical, Hp, Ibm and 4 more | 9 Ubuntu Linux, Hp-ux, Aix and 6 more | 2026-08-18 | 7.3 High |
| IBM Informix Dynamic Server 14.10, 15.0, and 12.10 could allow an unauthenticated user to execute arbitrary commands with service account privileges on the system due to improper validation of user supplied input. | ||||
| CVE-2026-64880 | 2 Linux, Tenable | 2 Linux Kernel, Security Center | 2026-08-18 | 7.1 High |
| Unsanitized user-supplied input in report filtering parameters is concatenated directly into SQL queries without proper escaping or parameterized queries, enabling blind SQL injection and unauthorized database read access. | ||||
| CVE-2026-64879 | 2 Linux, Tenable | 2 Linux Kernel, Security Center | 2026-08-18 | 9.9 Critical |
| A filename supplied during file upload is not properly sanitized before being used in system command execution, allowing an attacker to inject shell metacharacters and achieve command injection via the audit file upload functionality. | ||||
| CVE-2026-64878 | 2 Linux, Tenable | 2 Linux Kernel, Security Center | 2026-08-18 | 9.9 Critical |
| Unvalidated input in asset filter parameters allows shell metacharacters to escape command argument handling, resulting in remote code execution as a low-privileged OS user via the Analysis REST endpoint. | ||||
| CVE-2026-64877 | 2 Linux, Tenable | 2 Linux Kernel, Security Center | 2026-08-18 | 8.4 High |
| An authenticated non-admin user can exploit a SQL injection flaw in the ticketing REST API to access sensitive data stored in the appliance database. | ||||
| CVE-2026-64881 | 2 Linux, Tenable | 2 Linux Kernel, Security Center | 2026-08-18 | 8.8 High |
| The audit file upload handler does not sanitize filenames, allowing shell metacharacters to flow into system command execution. This input validation failure enables command injection when chained with a related vulnerability. | ||||
| CVE-2026-72138 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xen/gntdev: fix error handling in ioctl When gntdev_ioctl_map_grant_ref() fails to copy the operation result back to userspace after successfully adding the mapping to the list, the error path returns -EFAULT without releasing the reference acquired by gntdev_alloc_map(). The mapping remains in priv->maps with a refcount of 1, causing a memory leak and a dangling list entry. Additionally, gntdev_add_map() may modify map->index to avoid overlap with existing mappings. Therefore, the index returned to userspace must be obtained after gntdev_add_map() completes. Fix this by holding the mutex across gntdev_add_map(), retrieving the correct index, and copy_to_user(). If copy_to_user() fails, remove the mapping from the list and release the reference while still holding the lock. Fix these issues by properly handling all error cases. | ||||
| CVE-2026-72160 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject dinodes with non-canonical i_mode type Patch series "ocfs2: harden inode validators against forged metadata", v2. This series adds three structural checks to OCFS2 dinode validation so malformed on-disk fields are rejected before ocfs2_populate_inode() copies them into the in-core inode. The checks cover: - i_mode values whose type bits do not name a canonical POSIX file type; - non-device dinodes whose id1.dev1.i_rdev field is non-zero; and - non-inline dinodes that claim non-zero i_size while i_clusters is zero, covering directories unconditionally and regular files on non-sparse volumes. The normal read path reports these through ocfs2_error(), matching the existing suballoc-slot, inline-data, chain-list, and refcount checks. The online filecheck path uses the same structural predicates but keeps its own reporting contract, returning OCFS2_FILECHECK_ERR_INVALIDINO instead of calling ocfs2_error(). This patch (of 3): ocfs2_validate_inode_block() currently accepts any non-zero i_mode value. ocfs2_populate_inode() then copies that mode verbatim into inode->i_mode and dispatches on i_mode & S_IFMT to the file/dir/symlink/special_file iops; an unrecognised type falls through to ocfs2_special_file_iops and init_special_inode(). Reject dinodes whose type bits do not name one of the seven canonical POSIX file types. Use fs_umode_to_ftype(), the same generic file-type conversion helper OCFS2 already uses for directory entries, so the accepted inode type set matches the kernel file-type vocabulary instead of open-coding a local switch. Apply the same structural check to the online filecheck read path. filecheck keeps its own error namespace, so it reports malformed i_mode through the filecheck logger and OCFS2_FILECHECK_ERR_INVALIDINO instead of calling ocfs2_error(), but it must not allow a malformed dinode to proceed into ocfs2_populate_inode(). | ||||
| CVE-2026-72167 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: pl353: fix probe resource allocation During probe(), the devm_ioremap() is called with the parent device instead of the current one. So when the module is unloaded, the register area isn't released. Target the pl35x device in the devm_ioremap() instead of its parent. | ||||
| CVE-2026-72264 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: tridentfb: fix potential memory leak in trident_pci_probe() In trident_pci_probe(), the memory allocated for modelist using fb_videomode_to_modelist() is not freed in subsequent error paths. Fix that by calling fb_destroy_modelist(). | ||||
| CVE-2026-72281 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: account pKVM reclaim against the VM mm Protected guest faults charge long term pins to the VM's mm. Teardown can run later from file release, where current->mm may be unrelated. Drop the charge from kvm->mm instead. | ||||
| CVE-2026-72370 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iomap: release pages on atomic dio size mismatch If bio_iov_iter_get_pages() or the bounce helper succeeds but builds a short bio, the REQ_ATOMIC size check rejects it before submission. The old error path only dropped the bio reference, leaving any pages already attached to the bio unreleased. Release or unbounce the pages before falling through to out_put_bio on this error path. This bug was reported by sashiko: https://sashiko.dev/#/patchset/20260608073134.95964-1-changfengnan%40bytedance.com | ||||
| CVE-2026-72381 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of fp->owner.name in durable handle owner check Two concurrent SMB2 durable reconnects (DH2C/DHnC) on the same persistent_id race the fp->owner.name compare-read in ksmbd_vfs_compare_durable_owner() against the kfree() in ksmbd_reopen_durable_fd()'s reopen-success path. fp->owner.name is a standalone kstrdup() buffer whose lifetime is independent of the fp refcount, and the two sites share no lock: the compare reads the buffer while the reopen frees it, so the strcmp() can dereference freed memory. Commit 7ce4fc40018d ("ksmbd: fix durable reconnect double-bind race in ksmbd_reopen_durable_fd") made the fp->conn claim atomic under global_ft.lock (closing the owner.name double-free and the ksmbd_file write-UAF), but the compare-read versus reopen-free pair was left unserialized. BUG: KASAN: slab-use-after-free in strcmp+0x2c/0x80 Read of size 1 by task kworker strcmp ksmbd_vfs_compare_durable_owner smb2_check_durable_oplock smb2_open Freed by task kworker: kfree ksmbd_reopen_durable_fd smb2_open Allocated by task kworker: kstrdup session_fd_check smb2_session_logoff The buggy address belongs to the cache kmalloc-8 Serialize both sides of the race with fp->f_lock. The global durable file-table lock still protects the durable reconnect claim, but fp->owner.name is per-open state and does not need to block unrelated durable table lookups or reconnects. The teardown is left at its existing location after the reopen-success point so that an __open_id() rollback still retains owner.name for a later legitimate reconnect to verify. | ||||
| CVE-2026-72132 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NFS: Charge unstable writes by request size, not folio size nfs_folio_mark_unstable() and nfs_folio_clear_commit() charge and uncharge NR_WRITEBACK/WB_WRITEBACK by folio_nr_pages(folio) once per *request* added to or removed from a commit list. This is correct only when a folio has a single associated request. When pg_test splits a folio into N sub-folio requests (e.g. pNFS flexfiles striping with a stripe unit smaller than the folio size, or plain wsize-limited splitting), each of the N requests independently charges the whole folio's page count, inflating the accounting by a factor of N per folio. With large folios and small stripe units this reaches multiple orders of magnitude: a 2 MiB folio split into 512 4 KiB requests can charge up to 512x its real size, pushing global dirty+writeback accounting past the system's dirty threshold and forcing every buffered writer on the host into the hard-throttle path, including unrelated in-kernel NFS server threads sharing the box. Charge each request only for the pages it actually covers. | ||||
| CVE-2026-72133 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: uniphier: Fix completion initialization order before devm_request_irq() The driver calls devm_request_irq() before initializing the completion used by the interrupt handler. Because the interrupt may occur immediately after devm_request_irq(), the handler may execute before init_completion(). This may result in calling complete() on an uninitialized completion, causing undefined behavior. This has been observed with KASAN. Fix this by initializing the completion before registering the IRQ. | ||||
| CVE-2026-72134 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: imx: reconfigure for PIO when DMA cannot be started When spi_imx_can_dma() selects DMA, the ECSPI is configured for DMA: spi_imx_setupxfer() sets CTRL.SMC and clears dynamic_burst, and spi_imx_dma_transfer() programs the dynamic-burst BURST_LENGTH and the SDMA watermarks. If the DMA descriptor cannot be prepared (dmaengine_prep_slave_single() returns NULL), the transfer is failed with SPI_TRANS_FAIL_NO_START and falls back to PIO. The dynamic-burst DMA path uses its own bounce buffers instead of the SPI core's mapping, so xfer->{tx,rx}_sg_mapped are not set and the core's DMA->PIO retry is skipped; the driver falls back to PIO internally. But none of the DMA-mode configuration is undone, so the PIO transfer runs with CTRL.SMC set, the wrong burst length and dynamic_burst cleared, and the transferred data is corrupted. This is easily hit on i.MX8MP boards that describe ECSPI DMA in the device tree but run SDMA on ROM firmware (no external sdma-imx7d.bin): every ECSPI DMA prepare fails. An Infineon SLB9670 TPM on ECSPI1 then returns shifted TPM2_GetCapability data, is flagged "field failure mode", /dev/tpmrm0 is never created. Set controller->fallback before re-running spi_imx_setupxfer() so the ECSPI is reconfigured exactly like a normal PIO transfer. With controller->fallback set, spi_imx_setupxfer() sees spi_imx_can_dma() return false, so it clears spi_imx->usedma and reprograms the controller (clears CTRL.SMC, restores dynamic_burst and the PIO burst length). No explicit spi_imx->usedma = false is needed: setupxfer() already updates it from the can_dma() result. | ||||
| CVE-2026-72135 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tpm: Make the TPM character devices non-seekable The TPM character devices expose a sequential command/response interface, but their open handlers leave FMODE_PREAD and FMODE_PWRITE enabled. After a command leaves a response pending, pread(fd, buf, 16, 0x1400) passes 0x1400 as *off to tpm_common_read(). The transfer length is bounded by response_length, but the offset is used unchecked when forming data_buffer + *off. A sufficiently large offset therefore causes an out-of-bounds heap read through copy_to_user() and, if the copy succeeds, an out-of-bounds zero-write through the following memset(). Positional I/O does not provide coherent semantics for this interface. An arbitrary pread offset cannot represent how much of a response has been consumed sequentially. The write callback always stores a command at the start of data_buffer, while pwrite() does not update file->f_pos and can leave the sequential read cursor stale. Call nonseekable_open() from both open handlers. This removes FMODE_PREAD and FMODE_PWRITE, causing positional reads and writes to fail with -ESPIPE before reaching the TPM callbacks, and explicitly marks the files non-seekable. Normal read() and write() continue to use the existing sequential f_pos cursor, leaving the response state machine unchanged. Tested on Linux 6.12 with KASAN and a swtpm TPM2 device: - sequential partial reads returned the complete response - pread() and preadv() with offset 0x1400 returned -ESPIPE - pwrite() and pwritev() with offset zero returned -ESPIPE - the pending response remained intact after the rejected operations - a subsequent normal command/response cycle completed normally - no KASAN report was produced. | ||||